PACKAGING EQUIPMENT PORTFOLIO. Packaging Equipment Portfolio OPTIMUM QUALITY MAXIMUM RELIABILITY - KIPDF.COM (2024)

PACKAGING EQUIPMENT PORTFOLIO

®

Packaging Equipment Portfolio OPTIMUM QUALITY MAXIMUM RELIABILITY

PACKAGING EQUIPMENT PORTFOLIO

®

OPTIMUM QUALITY MAXIMUM RELIABILITY

The Optimax brand is a global standard that encapsulates the very best packaging equipment and consumables available to the packaging professional. The Optimax range of packaging equipment has been designed and developed to offer the ultimate in performance, construction and innovation for use in all industrial packaging operations. Each Optimax product is manufactured to the most exacting standards and only products that represent the pinnacle in performance for their application bear the Optimax brand. Combined with industry-leading levels of technical, service and spares support, the Optimax brand is the most comprehensive, reliable and cost effective solution to all your packaging equipment requirements.

Go online now to discover the complete Optimax Packaging Equipment Range at

www.optimaxproducts.com

The catalogue full of innovative packaging solutions...

Contents papers & protective packaging > > > > >

An introduction to Xtegra® 6 Tegrabond® Water Activated Tape Systems 8 ® Tegralert Transit Monitor Labels & Non Stack Cones 12 Stickfast Glue Guns and Accessories 14 ® Tegracheck Tamper Evident Tapes and Labels 18

tapes & tape systems > > > > >

Bonus Tape Tape Dispensers Adhesive Tapes Marcwell Lane Marking System Case Tapers

21 22 26 31 32

films & polythene products > > > > > > > > > > > > > > > > > > >

Grip Seal Bags Polythene Bags Polythene Carrier Bags Packing List Envelopes Polythene Sheeting & PVC Shrink Film Optimax® Heat Shrink Chambers Shrink Film Systems Pacseal Heat Sealers Pro-Seal Impulse Heat Sealers Opti-seal Industrial Heat Sealers Polythene Sacks and Bin Liners Protective Sleeving Anti-Static Packaging Ripack Shrink Film Systems Pacplus® Shrink Film Systems Polythene Shrink Films Stretch Films Stretch Film Dispensers Optimax® Stretch Film Turntables

34 35 37 38 39 40 42 44 45 46 48 48 48 49 51 51 52 53 53

Packaging Papers Jiffy Bags & Mailing Envelopes Trans Monitor Transit Labels Trans Label Parcel Labels Trans Haz Hazard Warning Labels Pillopax Air-Pillow Systems EcoPax Cushion Pack Systems Plastic Pallets

55 56 57 58 59 60 62 64

CONTENTS

security optimised packaging

> > > > > > > >

strapping products & consumables > > > > > > > > > > > > > > > > > > > > >

Kraftek Edge Boards Trans Tarp Tarpaulins Slipguard Anti-Slip Sheets Kit Start Strapping Kits Strapping Tools for PP Strapping Battery Powered PP/PE Tools Tools for Cord & Composite Polyester Tools for Steel Strapping Strapping Dispensers Stainless Steel Strapping Buckles & Strapping Seals Safeguard Strapping Seals Plaztek Edge Protectors Steel Strapping Polypropylene Strapping Trimax Polyester Strapping Woven Cord Polyester Strapping Hotmelt Cord Polyester Strapping Composite Polyester Strapping Bale Press Strapping Auto & Semi-Auto Strapping Machines

66 67 67 68 70 73 75 76 77 78 80 81 83 84 85 86 87 87 87 87 88

packing room equipment > > > > > > >

Pacplan Technik Packing Stations Pacplan Ergoline Packing Stations Pacplan Anti-Fatigue Mats and Dispensers Kinetix Work Station Stapling Utility & Safety Knives Janitorial

CONTENTS

94 96 97 98 99 104 106

3

Environmental Stewardship Commitment

We are committed to sourcing and offering you a range of alternative eco-friendly packaging products and solutions Our range includes a number of eco-friendly green alternatives that will show your commitment to the environment and reinforce your green credentials.

Throughout this catalogue you will see our ‘Eco-Friendly’ logo. This signifies at a glance that the product it accompanies offers a green packaging solution.

4

ECO PRODUCTS

The ‘Packaging Reduction Range’ logo highlights products that offer a solution to reducing packaging waste.

xtegra® security optimised packaging An introduction to Xtegra® 6 Xtegra® Tegrabond® Water Activated Tape Systems 8 ® ® Xtegra Tegralert Transit Monitor Labels & Non Stack Cones12 Xtegra® Stickfast Hot Melt Glue Guns 14 ® ® Xtegra Tegracheck Tamper Evident Tapes, Labels 18 & Security Tags XTEGRA®

> > > > >

XTEGRA®

5

An introduction to Xtegra®

Use Xtegra© products to protect your brand, optimise security, reduce costs and despatch your products with peace of mind and total confidence. Xtegra© tamper evident and security packaging products...

> DETER pilferage, tampering and infiltration of hazardous substances or counterfeit products.

> PREVENT contamination of contents due to inadequate sealing.

> ALERT all logistics personnel to consignment requirements.

> REDUCE the risk of damage to fragile contents and loss of valuable goods.

> EXPOSE mishandling and breaches of security.

For more information on the range of Xtegra® security optimised packaging products, please visit:

www.xtegraproducts.com

6

XTEGRA®

XTEGRA® INTRODUCTION

An introduction to Xtegra®

XTEGRA®

7

Xtegra® Tegrabond®, the new name for Water Activated Tape systems

Tegrabond® Water Activated Tape Dispensers Largest tape capacity in the industry

BP555

Electric Water Activated Tape Dispenser

, able mme keys a r g o d e Pr pe r-cod le ta colou ammeab tion r a r g ro igu Pre-p gth conf design ic len m o n Ergo

Suitable for plain and reinforced tape up to 70mm wide > Fully electronic control system Improves reliability and serviceability > Automatic Function The automatic button allows the operator to key in specific lengths. The machine will then automatically dispense the next piece of tape, dramatically increasing productivity. > Programmable keys Set tape lengths up to 305cm depending on model. Tape length is adjustable (up or down) in 12.7mm increments. > Random length key To allow tape to be dispensed in any length. > Largest tape capacity in the industry For fewer changeovers > Extra heavy duty, self-oiling blade For superior, consistent cutting > Steel frame construction covered with ABS plastic For strength, durability and impact resistance > 20% increase in motor power For longer life, cooler running and smoother operation > Extra long (detachable) electric cord For improved operator ease, comfort and safety > Engineered & built to meet or exceed FCC, UL, CE and CSA(CUL) regulatory requirements > Ergonomic design Allows for operation from either side of the machine > Improved operator safety features - Designed for easy mounting on work surfaces

U L APPROVED

16.1kg

Tegrabond®

Dependable Dispensing Tegrabond Electric Dispensing System Integrates with On AMDI with Ink Jet Printer Demand Printing Automatic Measuring Device ®

BP500-IJPS

ble varia and, -dem n o , os m eable pi log syste ramm printing ble 300 d t Prog a je t ink prin to 3 nised HP ware g s up t Store Uses reco s and sof urs e idg t colo cartr e of prin Choic

Complete System Including BP500IJ Tape Dispenser & Print Head Module with bracket (This price doe not include the Hand Controller)

Tegrabond®

BP555-EZ The BP555 is also available for use with EZ Pull Tab Tape

0.7kg

8

XTEGRA® TEGRABOND®

The BP500-IJPS offers rugged and reliable performance of an easy-to-operate tape dispenser with the added power of an integrated ink jet printer. The BetterPack Ink Jet gives you the ability to print directly on the tape as it is dispensed and the option to change the printed message as needed without changing ink pads. It can hold up to three logos at a time. The 500IJPS is engineered for durability, ease of use and safety. It is fast and reliable and will improve the efficiency and speed of operations with medium to high volume packaging needs. Controller Standard Operating Features : > Alpha/Numeric character set plus special characters > Message length: 24 Characters of 12mm height or 48 Characters of 5.5mm height (24 per doublestacked line) > Print resolution: 300 dpi at 200 feet per minute (61m) > Programmable line speed > Inverted Printing > Programmable print delay > Inter-character spacing > Programmable print direction > Cartridge volume; 42cc > Colours: Black, Blue, Red, Green, Yellow > Low ink monitoring > Power Required: 110-240 VAC, 50-60Hz 0.5a Environmental: 50F - 104F (10C - 40 C) > Up to 80% RH non-condensing

IJP-4500BK6 Black Ink Cartridges

NP-CTR Hand Controller

/ Box 6 cartridges

Tegrabond®

Tegrabond®

BPFPS

TA2000

Foot Pedal (Hands free operation) Dispenses tape with a touch of the foot to allow both hands for carton sealing.

Tape Aerial Add a TA2000 Tape Aerial to the BP555 System to deliver and hold tape in an upright position for easy access and increased efficiency. Especially useful for long tape lengths.

0.7kg

y ctivit rodu sed p 20% a re c to In by up ed tape c Redu teage was

Ideal for random size cartons, increase productivity up to 20% with the AMD1 and save on tape wastage too! This option interfaces with the BP555 to automatically measure cartons and dispense the perfect amount of tape each and every time Water activated tamper evident carton sealing tape ensures pack integrity, providing security against pilferage, contamination and counterfeit products. It is even effective on dusty and partially filled cartons. Combined with the BetterPackages innovative range of manual and electric dispensing systems, it provides cost effective, time saving and professional carton sealing solutions.

0.6kg

0.6kg

Go to www.xtegraproducts.com to view the new Tegrabond® brochure for more details

Tegrabond®

BP500

Electric Water Activated Tape Dispenser

Tegrabond®

Heavy Duty Variable Length Water Activated Tape Dispenser

BP333

ntry ed, e ser ly-pric en titive ape disp n e p Com lectric t n desig e e level ged, prov ed tape Rug etermin ad Pre-d gth keyp len

> For plain and reinforced gummed tape up to 77mm wide > Rugged proven design > Electronic key pad for pre-determined length dispensing up to 305cm > UL, CSA and CE approved

sign e c ed de Rugg aintenan ngth m le pe le Simp mined ta eter ettings er Pre-d s o pow ires n Requ supply

> Suitable for plain and reinforced tape up to 77mm > Up to 76cm of tape in one stroke > Simplified tape length settings > Uniform wetting & clean cutting > Rugged design & simple maintenance > Tremendous value 14.4kg

10.3kg

Tegrabond®

Tegrabond®

Tegrabond®

3S

BP755

Water Activated Tape Dispenser

Electronic Water Activated Tape Dispenser nual y ma y dut ser v a e n r H dispe blade fo ue d force , uniq New and rein plain tapes

width tape 0 mm 0 imum Max acity of 1easy-wipe cap coded eypad rk Colouembrane quiet m remely n Ext peratio o

BP333-EZ Water Activated Tape Dispenser The BP333-EZ is also available for use with E-Z Pull Tab Tape 0.7kg

Tegrabond®

K7015B-EZPTT E-Z Pull Tab Tape > Excellent for low volume use with all grades of water-activated tapes, the 3S is superior to all other ‘pull-and-tear’ dispensers. > Unique ‘subway-feel’ provides uniform tension to aid tape moistening and ease of operation. > Accepts rolls of tape from 25mm to 76mm wide

> Colour coded, soft-touch push button operation, dispenses tape from 15.25cm to 190cm. The random button allows an infinite choice of lengths > Two water brushes for uniform wetting > Top heater to ensure all the tape’s adhesive is reactivated > Heavy duty dual shear cutting blades for clean cuts & long life > Large enclosed water reservoir > Handles reinforced & paper tapes from 25mm to 100mm wide

0.6kg

E-Z Pull Tab Tape is a kraft paper tape with a water activated adhesive that penetrates the surface of cartons providing an incredibly strong and secure closure. With its patented tab-and-tear strip it offers fast and easy opening with no risk of damage to contents from sharp objects. E-Z Pull Tab Tapes work most efficiently with Tegrabond® dispenser systems.

18.3kg

cking unpats easy p for g preven ri t s r in a open ral te age Integ lade freeents damsecurity es B cont evident enhanc rat e t Tampsystem thd produc ge ue Uniq our packa y

Tegrabond

®

EPS80 > Manual pull & tear dispenser, max width 80mm > Not suitable for reinforced water activated tape.

lain, r all p aterw ble fo Suita einforcedapes t non-rctivated -volume a low s l for Idea shipperst co Low

1.6kg

Code

Description

K7015BEZPTT

70mm x 152mtr E-Z Pull Tab Tape 10 Rolls/Case

Dispensers compatible with E-Z Pull Tab Tape: BP333-EZ (manual operation) BP555-EZ (electronic)

XTEGRA® TEGRABOND®

8.5

9

XTEGRA® TEGRABOND® WAT SYSTEMS

Tegrabond® Water Activated Tape Dispensers

High quality Tegrabond® water-activated paper tape increases consignment integrity

Tegrabond® Water Activated Tapes Water Activated Tapes

New Code

Old Code

Description

Plain Tapes

WGT48

K2420B-60GSI K3620B-60GSI K3620B-60GSO K4820B-60GSI K4820B-60GSO K7020B-60GSI K7020B-60GSO K9620B-60GSI K9620B-60GSO K4820B-70GSI K7020C38B-70GSI K7020B-90GSI K7020B-90GSO K4820W-70GSI

38mm core Xtegra® Tegrabond® Water Activated Tape, 24mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 36mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 36mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 48mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 48mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 96mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 96mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 48mm x 200mtr, 70gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 70gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 90gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 90gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 48mm x 200mtr, 70gsm white, GSI

48 Rolls/Case 36 Rolls/Case 36 Rolls/Case 30 Rolls/Case 30 Rolls/Case 18 Rolls/Case 18 Rolls/Case 12 Rolls/Case 12 Rolls/Case 30 Rolls/Case 18 Rolls/Case 18 Rolls/Case 18 Rolls/Case 24 Rolls/Case

25.0 25.0 25.0 23.3 23.3 25.0 25.0 20.0 20.0 21.35 21.35 26.0 26.0 24.0

K6050-76/O K6070-76/O K7070-76/O K9070-76/O K7050-76/O K7060-76/O K7096-76/O K6050-76/I K6070-76/I WGT9050-76/O WGT9070-76/O

K5020C76B-60GSO K7020C76B-60GSO K7020C76B-70GSO K7015C76B-90GSO K5020C76B-70GSO K6020C76B-70GSO K9620C76B-70GSO K5020C76B-60GSI K7020C76B-60GSI K5020C76W-90GSO K7020C76W-90GSO

76mm core Xtegra® Tegrabond® Water Activated Tape, 50mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 60gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 70gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 70mm x 150mtr, 90gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 50mm x 200mtr, 70gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 60mm x 200mtr, 70gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 96mm x 200mtr, 70gsm brown, GSO Xtegra® Tegrabond® Water Activated Tape, 50mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 60gsm brown, GSI Xtegra® Tegrabond® Water Activated Tape, 50mm x 200mtr, 90gsm white, GSO Xtegra® Tegrabond® Water Activated Tape, 70mm x 200mtr, 90gsm white, GSO

24 Rolls/Case 18 Rolls/Case 18 Rolls/Case 18 Rolls/Case 24 Rolls/Case 24 Rolls/Case 12 Rolls/Case 24 Rolls/Case 18 Rolls/Case 24 Rolls/Case 18 Rolls/Case

18.72 17.47 20.16 18.82 21.60 21.60 20.74 18.72 17.47 26.88 25.09

KR4810B-GSI KR7010B-GSI KR7010BW-GSI KR7015B-GSI

38mm core Xtegra® Tegrabond® Reinforced Water Activated Tape, 48mm x 100mtr, brown, GSI Xtegra® Tegrabond® Reinforced Water Activated Tape, 70mm x 100mtr, brown, GSI Xtegra® Tegrabond® Reinforced Water Activated Tape, 70mm x 100mtr, oyster, GSI Xtegra® Tegrabond® Reinforced Water Activated Tape, 70mm x 152mtr, brown, GSI

24 Rolls/Case 16 Rolls/Case 16 Rolls/Case 6 Rolls/Box

17.5 15.7

KR7010C76B-GSO K7615SW-70GSI

76mm core Xtegra® Tegrabond® Reinforced Water Activated Tape, 70mm x 100mtr, brown, GSO Xtegra® Tegrabond® Reinforced Water Activated Tape, 76mm x 152mtr, Snowwhite kraft

16 Rolls/Case 6 Rolls/Box

32.00

K6024 K6036 K6048 K6070 K6096 K7048 K7070 K9070

Reinforced Tapes RGT48 RGT70 KR500-6

RGT7076C/O

8.1

Sentry Seal Water Activated Tape Helps to prevent > Pilfering > Contamination > Counterfeiting > Tampering

Old Code

Old Code

urity ge le sec a visib ce pilfer n ly h u o Hig to red aves s e n g ig m a s u s e s d e im m inted d min Prepr costs an s r print orde

Description

KRM.SS KR7015-SENSEAL Xtegra® Tegrabond® Sentry Seal Tape, 70mm x 152mtr, GSI KR50-CAUT KR7015B-CAUT Xtegra® Tegrabond® Reinforced Water Activated Tape, 70mm x 150mtr, brown, GSI (CAUTION) KR7015B-IMPCA Xtegra Tegrabond Reinforced Water Activated Tape, 70mm x 150mtr, brown, GSI (IMPORTANT CAUTION)

10

XTEGRA® TEGRABOND®

6 Rolls/Box 6 Rolls/Box 6 Rolls/Box

8.5 8.5 8.5

Go to www.xtegraproducts.com to view the new Tegrabond® brochure for more details

Tegrabond® XTEGRA® TEGRABOND® WAT SYSTEMS

The ultimate tape applied security seal

Consider the advantages...

1

An Integral Closure The adhesives in Tegrabond® water activated tape penetrate into the fibres of the carton, creating a total bond. As the tape becomes an integral part of the carton this adds considerable strength to the closure as opposed to the purely top-surface bond of standard packaging tape adhesive. Plastic tape does not provide the same level of security as Tegrabond® water activated tape.

2

Tamper Evidence

3

100% Recyclability

4

Temperature Tolerant

5

Improved Packaging Presentation

6

Cost Savings

7

Increased Productivity and Reduced Operator Fatigue

Tegrabond® water activated tape cannot be removed from the carton without leaving traces of damage, unlike standard packaging tapes which can be removed with no visible trace. Hence Tegrabond® water activated tape offers clearly visible proof of a package’s seal being tampered with. Specialist Tegrabond® tamper-evident reinforced tape is also available for increased security protection.

Tegrabond® water activated tape is made from renewable natural resources which makes recycling easier. Packaging research associations have all given Tegrabond® water activated tape recyclability accreditation, making it the environmentally-friendly choice for the packaging professional.

Even with extreme variations of temperature and humidity, Tegrabond® water activated tape’s seal retains its strength and remains highly resistant to ageing, making it the ideal solution for long term storage.

Tegrabond® water activated tape also out- performs plastic tape on presentation, adhering flat against the carton and blending with the character of the cardboard, in contrast with the shiny, rippled seal often seen with plastic tape. Tegrabond® water activated tape also shows the customer that you care for the environment.

Tegrabond® water activated tape is a cost effective way of carton sealing and can be cheaper per linear metre than any reasonable grade packaging tape. Only one strip of Tegrabond® water activated tape is generally required where several strips of cheap plastic tape would be otherwise needed.

When applying Tegrabond® water activated tape with our professional range of Tegrabond® taping systems, we have proven test records of increased productivity and a reduction in operator fatigue compared with the results of using a combination of plastic tape and standard tape guns.

XTEGRA® TEGRABOND®

11

Innovative transit monitors designed to deter and detect mistreatment

Tegralert® Transit Monitors

High visibility indicators of in-transit mishandling

Consider the advantages... Visible Deterrent

1

Xtegra® Tegralert® transit monitors act as an obvious, visual deterrent to potential in-transit mishandling of your packaged goods. Available in a range of sensitivities based on the weight and fragility of your consignment, Xtegra® Tegralert® transit monitors can detect whether a parcel has been dropped, tilted or jarred to a degree that would compromise the integrity of its contents.

2

Easily Identifiable

3

Mishandling Accountability

12

Combined with their own informative companion labels, Xtegra® Tegralert® transit monitors clearly indicate whether a packaged has been properly or improperly handled whilst in trasnit or storage. Carriers are clearly informed via the companion label that the consignment requires particular handling and that if not adhered to, will identify mishandling to the recipient.

Xtegra® Tegralert® transit monitors enable the way in which a consignment was despatched, carried and delivered to be monitored. This helps to save time when tracing the cause of damaged delivered goods and consequently in obtaining compensation from the relevant party.

XTEGRA® TRANSIT MONITORS

Go to www.xtegraproducts.com to view the new Transit Monitor brochure for more details

DNT-LB DROP‘N’TELL SYSTEM

The Drop‘n’Tell includes two warning labels and is manufactured to detect six different ranges of G-force (5G, 10G, 15G, 25G, 50G and 100G). The device monitoring 5 times the force of gravity is very sensitive. The device monitoring 100 times the force of gravity requires a greater impact to activate. Attach the Drop‘n’Tell to your product by removing the liner on the back to expose the adhesive or screw/nail it using the holes on each end.

Container Area in Cubic Metres

SWL SHOCKWATCH SYSTEM

Code

Colour

SWL-30 SWL-35 SWL-47 SWL-55 SWL-65

Green Orange Red Purple Yellow

A self adhesive label measuring 100mm x 100mm incorporating a glass tube which activates by turning red when the article to which it has been attached is dropped from a pre-determined height. There are five colour coded sensitivities designed to activate at certain drop heights. The Shockwatch sensitivity should be based on product fragility, container cushioning type and design. Field trials are recommended to determine the correct sensitivity relative to product damage.

Average Activation approx. height cm (ins) 120 (47) 90 (35) 47 (18) 33 (13) 30 (11)

Pack weight (kg)

0.00-0.028

0.028-0.142

0.142-0.425

0.425-1.416

1.416+

0.00-4.53

DNT-LB100

DNT-LB100

DNT-LB50

DNT-LB50

DNT-LB25

4.53-11.34

DNT-LB100

DNT-LB50

DNT-LB50

DNT-LB25

DNT-LB25

11.34-22.68

DNT-LB50

DNT-LB25

DNT-LB25

DNT-LB25

DNT-LB25

22.68-45.36

DNT-LB50

DNT-LB25

DNT-LB25

DNT-LB15

DNT-LB15

45.36-113.4

DNT-LB25

DNT-LB25

DNT-LB15

DNT-LB15

DNT-LB15

113.4-453.6

DNT-LB15

DNT-LB10

DNT-LB10

DNT-LB10

DNT-LB10

ATTENTION:

453.6+

DNT-LB5

DNT-LB5

DNT-LB10

DNT-LB10

DNT-LB10

Due to the sensitivity of Shockwatch, deliveries are made direct to you and the following charges will apply to cover for special transit packaging and carriage. Shockwatch orders will be treated as separate orders from allother products you order and Shockwatch monitors cannot be returned or refunded.

This chart should only be used as a basic guide. Drop‘n’Tell activation depends upon the type and amount of cushioning used to protect a product in transit. Drop height will also affect activation.

1.0kg/Box 100

SWL

Packed 100 Per Box

Packed 100 Per Box

TNT-LB TIP‘N’TELL SYSTEM

100 75 50 38 20

This chart should only be used as a basic guide. Drop‘n’Tell activation depends upon the type and amount of cushioning used to protect a product in transit. Drop height will also affect activation.

DNT-LB

With a brightly coloured monitoring device and warning label, the Tip’n’Tell system quickly alerts logistics personnel to the nature of care required. The Tip’n’Tell is affixed to a shipment either with the self-adhesive backing supplied or by nailing or stapling to a suitable surface, and is activated once in place by pulling the bar on the centre of the device. Once activated, the clear arrow on Tip’n’Tell will permanently change to blue if tipped beyond 90 degrees to the vertical, alerting the recipient to check for damage.

g Rating (approximate)

TILTW TILTWATCH SYSTEM

There are five Shockwatch colour coded sensitivities designed to activate at certain drop heights 0.4kg/Box 100

Caution! Please make sure Goods Inwards check the Shockwatches before signing for them. Claims cannot be accepted if signed for in good condition. Note: Drop ‘n’ Tel are an ideal alternative as they are only activated by removing the special pin.

The packaging label that provides indication of tilting. This user friendly device is the best choice for goods that must remain upright whilst in transit. These tamper evident and moistureproof Tiltwatch labels in a rigid plastic cover are ideal for export consignments. Simply remove the silicone backing paper and press indicator on to consignment, if tilting occurs indicator turns red. With no false activation under normal handling or vibration, Tiltwatch provides a reliable, accurate indication of mis-handling.

2.2kg/Box 100

TILTW 2.2kg/Box 100

Packed 30 Per Box

TNT-LB Packed 100 Per Box

Xtegra® Tegralert® Non-Stack Cones A simple to use, effective and highly visible deterrent to pallet stacking where this might damage the consignment or the integrity of its packaging. Tegralert® Non-Stack Cones are supplied flat-packed and are quickly assembled. They can be attached to a palletised consignment either by taping down the feet of the cone or by running pallet strap through the pre-cut slots.

Product Code:

NSC Packed in bundles of 25

XTEGRA® TRANSIT MONITORS

13

XTEGRA® TRANSIT MONITORS

Tegralert® Transit Monitors

Xtegra® Stickfast glue guns feature increased heating power to melt glues faster

Stickfast Glue Guns

SL150B 12mm SLIMLINE CORDLESS GLUE GUN

Comfortable 36v rechargeable rubberised grip battery and long trigger for added operator comfort.

Glue adjuster screw to control amount of glue dispensed per trigger pull.

Professional, rechargeable hotmelt glue gun for applications that require greater freedom of operator movement. Battery: Power consumption: Operational temp: Maximum glue output:

36v 1.3Ah 150W 205˚C 1000g/hr

Key model features include: Supplied with high quality Bosch AL3640CV battery charger

The Stickfast SL150B is supplied in a rugged carry case

14

XTEGRA® STICKFAST GLUE GUNS

0.68kg

Go to www.xtegraproducts.com to view the new Stickfast brochure for more details

GX80/GX80LT l -leve Entry strial indu lity qua

LIGHT DUTY GUNS 12mm

Key model features include:

Fine nozzle for accurate glue application.

Removable gun stand

Light duty industrial glue gun with pre-set temperature. Ideal for lower glue dispensing rates. GX80: Light Duty Model GX80LT: Low Melt Model Mains supply: 240v Power consumption: 80W Operational temp: 193˚C Maximum glue output: 500g/hr

Comfortable grip and long trigger for added operator comfort.

0.38kg

GX120 value Best oney for m

Light duty industrial glue gun with pre-set temperature. Ideal for lower glue dispensing rates.

LIGHT DUTY GUN 12mm

Key model features include: Mains supply: Power consumption: Operational temp: Maximum glue output:

Fine nozzle for accurate glue application.

Removable gun stand

240v 120W 193˚C 750g/hr

Illuminated on/off Comfortable grip switch. and long trigger for added operator comfort. 0.40kg

GX300

Medium duty glue gun featuring temperature and flow-rate adjustments, suited to high output industrial applications.

MEDIUM DUTY GUN 12mm

Key model features include:

Best r Selle

Mains supply: Power consumption: Operational temp: Maximum glue output:

Glue adjuster screw to control amount of glue dispensed per trigger pull.

Temperature control dial to suit glue application.

240v 300W 120 - 230˚C 1500g/hr

Illuminated on/off Comfortable switch. rubberised grip and long trigger for added operator comfort. 0.70kg

GX600 glue more n 140% tick tha per s m guns 12m

Heavy duty, powerful glue gun for enhanced flow rate, featuring a sturdy integral stand and temperature and flow-rate adjustments.

HEAVY DUTY GUN 18mm

Key model features include:

Mains supply: Power consumption: Operational temp: Maximum glue output:

Glue adjuster screw to control amount of glue dispensed per trigger pull.

Temperature control dial to suit glue application.

240v 600W 140 - 230˚C 2500g/hr

Illuminated on/off Comfortable switch. rubberised grip and long trigger for added operator comfort. 1.0kg

XTEGRA® STICKFAST GLUE GUNS

15

XTEGRA© STICKFAST GLUE GUNS & ACCESSORIES

Stickfast Glue Guns

Xtegra® Stickfast hotmelt glues are formulated to ensure optimum seal integrity

Stickfast Glues and Accessories GX600A in test Ligh lass c its

HEAVY DUTY GUN 18mm AIR ASSISTED

Key model features include:

Boasting all the features of the heavy duty GX600, this model also features air assisted feed for effortless, repetitive dispensing of high glue volumes. Mains supply: Power consumption: Operational temp: Maximum glue output:

Glue adjuster screw to control amount of glue dispensed per trigger pull.

Temperature control dial to suit glue application.

Illuminated on/off Comfortable switch. rubberised grip and long trigger for added operator comfort.

Pressure gauge and regulator included.

OPTI43 , slugs Uses s and t e pell ws pillo

1.3kg

HEAVY DUTY GUN

Key model features include:

High capacity 250ml glue chamber

Temperature control dial to suit glue application.

The Optigun™ OPTI43 features a large 250ml capacity glue chamber which takes 43mm slugs, pellets and bulk pillows. This enables the use of a wider range of hot melt glue types than with conventional stick-feed guns, and allows the OPTI43 to share the same glue supplies as automated dispensing systems. This heavy duty industrial gun requires no compressed air supply and is ergonomic and lightweight, yet dispenses large glue volumes with ease. > Optigun™ Accepts: > 43mm gluesticks > hotmelt pellets > bulk hotmelt pillows > Heavy duty industrial glue gun with no need for compressed air > 250ml capacity > Ergonomic and lightweight plus integrated magnetic foot > Huge range of peelable and permanent adhesives - more choice than with standard glue guns Mains supply: Power consumption: Operational temp:

Magentised foot for stability when not in use.

SL120

Illuminated on/off switch.

240v 600W 20 - 200˚C

1.2kg

12mm SLIMLINE LIGHT DUTY GLUE GUN

Key model features include:

Fine nozzle for accurate glue application.

for andle ne h perator li m o sli oved impr comfort

SL300

16

XTEGRA® STICKFAST GLUE GUNS

Glue adjuster screw to control amount of glue dispensed per trigger pull.

Comfortable grip and long trigger for added operator comfort.

0.54kg

12mm SLIMLINE MEDIUM DUTY GLUE GUN

Temperature control dial to suit glue application.

Ideal for high output industrial applications. Includes removable stand for ease of use. Mains supply: 240v Power consumption: 180W Operational temp: 193˚C Maximum glue output: 33g/min

Illuminated on/off switch.

Key model features include:

Glue adjuster screw to control amount of glue dispensed per trigger pull.

240v 600W 140 - 230˚C 2500g/hr

Illuminated on/off Comfortable switch. rubberised grip and long trigger for added operator comfort. 0.68kg

Suitable for high output industrial applications, with a more powerful glue heater to deliver enhanced glue output. Includes removable stand for ease of use. Mains supply: 240v Power consumption: 300W Operational temp: 120-230˚C Maximum glue output: 1500g/hr

For more details view the new Stickfast brochure on www.xtegraproducts.com

Stickfast Glues and Accessories XTEGRA® STICKFAST GLUE GUNS & ACCESSORIES

HGS12 Tool Balance

HGS00

HGS01

HGS02

HGS05

HGS06

For suspending HD gun over working area. Cord is 1.7m. Capacity 0.6-15kg

HGS07

Nozzles Nozzles for use with Stickfast hotmelt glue guns.

Hotmelt Adhesive Precision extruded to fit Stickfast glue guns and compatible with the majority of glue guns on the market. STICKFAST FSS

STICKFAST MPS

STICKFAST LTS

STICKFAST HSS

Fast setting stick for bonding card & paper. Ideal for carton sealing & packaging

The most popular glue stick. Use for fabrics, upholstery, plastics etc. Long set time.

Ideal for bonding heat sensitive materials eg. polystyrene without damage. Also use on fabrics, paper, card etc. Use in low temp guns.

Higher strength for assembly. Excellent on many plastics, metal & wood.

12mm Sticks (Price per box)

5kg/box

FSS12

MPS12

18mm Sticks (Price per box)

5kg/box

FSS18

MPS18

HSS18

43mm Slugs (Price per box)

FSS43 MPS43 HSS43 10kg/box 5kg/box 5kg/box

FSS43

MPS43

HSS43

LTS12

HSS12

Product Name

FSS

MPS

LTS

HSS

Suitability

Fast Set

Multipurpose

Low Melt

High Strength

description

Superior fast setting hotmelt for rapid closing and sealing of cartons. Ideal for all packaging applications.

All purpose hotmelt with medium to long set time. Ideal for a wide range of industrial and general use applications.

Special hotmelt applied at lower temperature. Ideal for heat sensitive products and reduced risk of accidental burns.

Assembly grade hotmelt for ‘difficult’ surfaces. Excellent adhesion and high molten tack for quick fixing of tile displays, carpet fitting etc.

set time set colour sizes (mm)

5-10 sec

20-30 sec

15-20 sec

20-30 sec

Tan

Clear

White

Amber

applicator gun* materials bonded: plastic wood textile polystyrene cardboard metal ceramic quantity and weight per box

Sticks 12mm x 300mm (FSS12) Sticks 12mm x 300mm (MPS12) Sticks 12mm x 300mm (LTS12)

Sticks 12mm x 300mm (HSS12)

Sticks 18mm x 300mm (FSS18) Sticks 18mm x 300mm (MPS18) All low temp. models

Sticks 18mm x 300mm (HSS18)

Slugs 43mm x 43mm (FSS43)

Slugs 43mm x 43mm (MPS43)

Slugs 43mm x 43mm (HSS43)

All models

All models

All models

❍ ❍ ❍ ●

❍ ❍ ❍

● ●

● ● ●

❍ ❍ ● ●

12mm = 34 sticks per kilo, 170 sticks per box, 5 kilos per box 18mm = 14 sticks per kilo, 70 sticks per box, 5 kilos per box 43mm = 17 slugs per kilo, 170 slugs per box, 10 kilos per box 85 slugs per box, 5 kilos per box

(● = Recommended 1st choice; ❍ = Recommended alternatives) *Please specify correct stick size for your gun when ordering.

XTEGRA® STICKFAST GLUE GUNS

17

Xtegra® Tegracheck® tapes, labels & tags provide easily identified, high visibility tamper evidence

Tegracheck® Tapes, Labels & Security Tags

Fast indentification of product contamination for the food, pharmaceutical, manufacturing and logistics industries

Consider the advantages... Visible Deterrent

1

Xtegra® Tegracheck® tamper evident tapes and labels act as an obvious, visual deterrent to potential pilferage and contamination during transit or storage. Available in a range of tapes and labels suited to many applications, Xtegra® transit monitors offer a clear and visible deterrent for the protection of high-value and sensitive contents.

2

Easily Identifiable

3

Huge Range of Applications

18

The high visibility design of all Xtegra® Tegracheck® tamper evident tapes and labels ensures that any potential pilferage and contamination can be quickly and easily identifed.

From the pharmaceutical, manufacturing, food processing and supply industries to logistics and packaging, the Xtegra® range of Tegracheck® tamper evident tapes and labels provides a cost effective first line of defence for your products whilst in storage or transit.

XTEGRA® TEGRACHECK®

For more details, view the new Tegracheck® brochure on www.xtegraproducts.com

Xtegra® Tegracheck® Tamper Evident Security Tape Tegracheck® Tapes offer an effective deterrent against, and indicator of, unauthorised access to consignment contents, depositing a clearly visible OPEN VOID alert on the carton when disturbed or removed. Tegracheck® Tapes are available in high-visibility red and blue (suitable for food processing environments).

Code

Size

Text

TSB50 TSR50 Rolls per case

48mm x 50mtr 48mm x 50mtr

OPEN VOID - Blue Adhesive OPEN VOID - Red Adhesive

16.0 16.0

Xtegra® Tegracheck® Tamper Evident Security Labels Tegracheck® Total Transfer Labels With a permanent OPEN VOID alert left behind on removal, Tegracheck® Total Transfer Labels act in a similar way to Tegracheck® Tapes, but provide a more professional image on presentation packaging. They can also be used in conjunction with Tegrabond® water activated tapes to create highly secure consignment packaging.

Tegracheck® Non-transfer Labels Tegracheck® Non-transfer Labels leave no residue on removal and may be reapplied to maintain a seal, but are constructed of laminated layers that when disturbed, display an OPEN VOID alert. Typical applications include: > Sealing of reusable packaging containers. > Temporary bonding of vehicle and aircraft doors. > Deterring unauthorised access to restricted areas. > Security sealing airline and hospital catering trolleys. > Protecting sensitive electronic or mechanical components against warranty invalidation.

Code

Description

TSLB4040 TSLB5020 TSLB8540 TSLR4040 TSLR5020 TSLR8540

Xtegra® Tegracheck® Security Labels Xtegra® Tegracheck® Security Labels Xtegra® Tegracheck® Security Labels Xtegra® Tegracheck® Security Labels Xtegra® Tegracheck® Security Labels Xtegra® Tegracheck® Security Labels

Size non-transfer non-transfer non-transfer total transfer total transfer total transfer

40mm dia 50 x 20mm 85 x 40mm 40mm dia. 50 x 20mm 85 x 40mm

Colour blue blue blue red red red

Qty/Roll roll/250 roll/250 roll/250 roll/250 roll/250 roll/250

Xtegra® Tegracheck® Tamper Evident Security Seals TSPT175R Pull-Up Security Seals

TSPT430R Bag Security Seals

Tamper Evident

Simple pull-tight design

Efficient pull-up locking system provides visual evidence that boxes or equipment have not been opened or used, suitable for small bags, boxes or sacks. Added security tracking, supplied with sequential security numbers.

A strong, high density polypropylene seal. Suitable for sealing cash bags or polythene sacks. Added security tracking, supplied with sequential security numbers. Tag dimensions: 22 x 68mm Total length: 430mm Usable length: 310mm Burst strength: 35kg Material: polypropylene. Sold in packs of 100

Tag dimensions: 35 x 20mm Total length: 175mm Usable length: 155mm Burst strength: 15kg Material: polypropylene. Sold in packs of 100

Code

Description

Size

TSPT175R Xtegra® Tegracheck® Pull-Tight Security Seals 175mm knurled tail, sequentially numbered TSPT430R Xtegra® Tegracheck® Pull-Tight Security Seals 430mm smooth band, sequentially numbered

Colour Qty/Pack Red 100 Red 100

XTEGRA® TEGRACHECK©

19

XTEGRA® TEGRACHECK® TAPES AND LABELS

Tegracheck® Tapes, Labels and Seals

tapes & tape systems > > > > >

20

Bonus Tape Tape Dispensers Adhesive Tapes Marcwell Lane Marking System Case Tapers

TAPES & TAPE SYSTEMS

21 22 26 31 32

Tape brands that perform

Innovative Tape Solutions Umaximise the number of cartons sealed per roll

Umaximise tape operator productivity on storage space due to the space-saving compact core and packaging design

Umaximise

Maximise operator productivity with the Umax brand of tapes & dispensers

on reduced packaging waste, less roll changes and more boxes sealed per roll

Umax

Umax

Umax Low Noise Packing Tape, 150 metre

Umax Polypropylene Packing Tape, 150 metre

> 25mu on unique 25mm core

> 25mu on unique 25mm core

Code

Code

Colour

LN150-C Clear 36 Rolls/Case LN150-B Buff 36 Rolls/Case

11.0 11.0

Colour

UN150-C Clear 36 Rolls/Case UN150-B Buff 36 Rolls/Case

Umax

Umax

Umax Polypropylene Packing Tape, 200 metre

BT50B

Code

Colour

UN200-C Clear UN200-B Buff

11.0 11.0

Umax

UMAXKIT

50mm Pistol Grip Carton Sealer For 25mm diameter core tapes

> on unique 25mm core

tape noise ll, lowe cartons o r t r ac omp nges, mod with a e Mtr c 150 ss roll ch compar ape e d t L seale tandard e space s g ge stora Less ss wasta Le

Rolls/Case Rolls/Case

For1” Core Tapes

Includes 1 x BT50B Pistol Grip Carton Sealer and 2 x Rolls of Umax Tape. 1 x Buff & 1 x Clear.

50 mm

50 mm

0.8kg

0.8kg

width

width

BonusTape The Ultimate Packaging Tape = (200mtr)

=

= (198mtr)

less downtime

less waste

ser ispen ng d e to i c u brak e red Nois justable sion on Ad ten e e s a s incre pe relea ta

less storage

Bonus Tape

Bonus Tape

Bonus Tape

50mm x 200mtrs Length

50mm x 200mtrs Length

> Solvent Adhesive > 28 micron

> Hotmelt Adhesive > 25 micron

Silent Bonus Tape Dispenser

Code

Colour

CBON-1 BBON-1

Clear 36 Rolls/Case Buff 36 Rolls/Case

15.45 15.45

Code

Colour

CBON-2 BBON-2

Clear 36 Rolls/Case Buff 36 Rolls/Case

Code 14.30 14.30

SBTD50

0.55 RB707 Blades RTF707 Tape Flap

TAPES & TAPE SYSTEMS

21

TAPES & TAPE SYSTEMS

Umaximise

Exclusive Products and outstanding deals

Tape Dispensers Why does everyone prefer the

PG50B?

Tape Dispenser

er pens s pe dis ou ing ta r continu cap ll e s t Bes n strip fo tection ro r Suctio Blade p blade fo g d tapin uble-side duct life ro p Do rk d o e d w exten increased y and ce safet pla

Pacplus®

PD712

PD712C

50mm Standard Pistol Grip Carton Sealer with Rubber Roller TAKES 132mtr 75mm core with TAPE adjustable brake.

50mm Standard Pistol Grip Carton Sealer with Plastic Roller TAKES 132mtr 75mm core with TAPE adjustable brake.

50 mm width

50 mm width

0.45kg

50 mm

TAKES 132mtr TAPE

Pacplus®

0.45kg

RB712 Blades

RB712 Blades

Pacplus®

Kinetix®

PG75B

PD717

Standard 75mm Pistol Grip Carton Sealer Suction Strip For 75mm width, 75mm core, with TAKES 132mtr adjustable brake. mm

50mm Economy/Budget Carton Sealer TAKES With metal frame 132mtr and brake. TAPE

Suction Strip Double Sided Blade Blade Saver cap

width

Standard Pistol Grip Carton Sealer For 50mm width 75mm core, with adjustable brake, safety blade cap, static suction grip & double edged blade.

75

TAPE

width

50 mm width

0.5kg 0.6kg RB50 Blades

RTF50 Tape Flap

0.45kg

RB75 Blades RTF75 Tape Flap

RB717 Blades RTF717 Tape Flap

Pacplus®

Pacplus®

Pacplus®

Pacplus®

PDFT50

PDFT75

NR50

PD705

Special sprung loaded core reduces the noise created by polypropylene tapes - only suitable for 50mm width tape with 75mm core.

50mm Foam Grip Carton Sealer 75mm core with adjustable brake.

50 mm width

TAKES 132mtr TAPE

50 mm width

0.4kg

Filament Tape Dispenser

Filament Tape Dispenser

For 50mm wide filament tapes.

50 mm

75 mm

For 75mm wide filament tapes.

width

width

1.0kg

0.4kg

RB50 Blades RTF50 Tape Flap

RB50 Blades RTF50 Tape Flap

Pacplus®

Pacplus®

EHD50

PD728

Heavy duty 50mm all metal pistol grip tape dispenser.

Special sprung loaded core reduces the noise created by polypropylene tapes - only suitable for 50mm width tape with 75mm core.

Suction Strip Blade Saver cap

TAKES 132mtr TAPE

50 mm width

0.35kg

Pacplus®

Pacplus®

Pacplus®

Pacplus®

HPG50B

HSD50B

PD707P

PD736T

Heavy Duty Premium Pistol Grip Carton Sealer TAKES For 50mm width, 132mtr 75mm core, with TAPE adjustable brake.

50mm Pistol Grip Carton Sealer For 50mm width, 75mm core with adjustable brake and retractable safety blade feature.

Heavy Duty Metal Dispenser

0.7kg HPG50RB Blades RTFHPG50 Tape Flap

22

TAPES & TAPE SYSTEMS

width

RB728 Blades RTF728 Tape Flap

RBFT75 Replacement Blades

width

50 mm

0.65kg

1.0kg

RBFT50 Replacement Blades

50 mm

TAKES 132mtr TAPE

TAKES 132mtr TAPE

Retractable Blade Safety Carton Sealer TAKES With metal frame 132mtr & adjustable brake. TAPE

50 mm width

0.45kg

Trigger Operated Safety Carton Sealer TAKES With metal frame, 132mtr adjustable brake & TAPE protecting attachment.

50 mm width

0.35kg RB707 Blades RTF707 Tape Flap

50 mm width

0.4kg RB736T Blades RTF736T Tape Flap

Hand held dispensers with unique features

blade saver The blade saver cap protects the blade when the dispenser is not in use - for maximum operator safety.

double sided blade When one side becomes blunt the blade can be quickly turned around to use the other side.

adjustable brake to enable the operator to control the tape release.

Tape Dispensers HPG75B Heavy Duty Premium Pistol Grip Carton Sealer For 75mm width 75mm core, with adjustable brake.

ed ooth arse-t ty co de to u d e k y bla ble bra pe Heav sta n ta l Adjutension o a t e M ase lease mtr re r 66 incre lls ble fo Suita 32 mtr ro &1 Heavy Duty Metal Dispenser

TAKES 132mtr TAPE

Pacplus®

Pacplus®

PG100B

PD781P

Standard 100mm Pistol Grip Carton Sealer For 100mm width 75mm core, with adjustable brake.

75mm Extra Heavy Duty Carton Sealer Double side plate with fixed brake.

75 mm

100 mm

Blade Saver Cap

width

0.9kg

0.8kg

0.4kg

width

RBHPG75 Blades RTFHPG75 Tape Flap

RB100 Blades RTF100 Tape Flap

Umax

Kinetix®

Pacplus®

ET50B

PD742

PD771

75mm Budget Carton Sealer With metal frame and brake.

100mm Extra Heavy Duty Carton Sealer Double side plate with fixed brake.

ecoars duty lade y v a b He othed o increase t to brakepe release & a stable Adju nsion on tr 100 mtr te able fo tr rolls it m u S 50 our 1 50mm Pistol Grip Carton Sealer

Economy Model

For 2” Core Tapes

For rolls on 2” diameter cores.

75 mm

Extra Heavy Duty

width

50 mm

TAKES 132mtr TAPE

75

mm

100 mm

Extra Heavy Duty

width

width

0.6kg

0.8kg

0.9kg

width

Umax

BT50B 50mm Pistol Grip Carton Sealer For rolls on 1” diameter cores.

rsey coa e d y dut Heavothed bla o increase t to brakepe release r t a stable Adju nsion on t our 150 m te ble for ly n a Suit rolls o

Pacplus®

Pacplus®

HHD50

CWF25

Compact Carton Sealer For 50mm x 66mtr tape.

For 1” Core Tapes

50 mm

Suitable for crossweave and filament tape up to 25mm wide.

50

mm width

0.4kg

0.8kg

25

mm width

0.2kg

width

Pacplus®

Pacplus®

Pacplus®

PD918

R-ENC25 R-ENC50 For Filament Tape

For Filament Tape

25mm enclosed metal dispenser for crossweave reinforced tape.

50mm enclosed metal dispenser for crossweave reinforced tape.

Double Sided Tape Dispenser

12/19mm Double Sided Transfer Tape Sealer For 33mtr rolls on 25mm diameter cores.

19 mm

0.75kg

width

25 mm

50 mm

width

width

Pacplus® 0.5kg

RBRE25 Blades RBRE50 Blades

Pacplus®

Pacplus®

PD931

Double Sided Tape Dispenser

25mm Pistol Grip Double Sided Tissue and Polypropylene Tape Carton Sealer For 50mtr rolls on 75mm diameter cores, & cutting blade. Max diameter roll of tape 155mm.

Pacplus®

D225 D238 D250

25 mm Pacplus®

25mm Metal Enclosed Carton Sealer

38mm Metal Enclosed Carton Sealer

0.65kg

width

PD932

50mm Metal Enclosed Carton Sealer

Double Sided Tape Dispenser

50mm Pistol Grip Double Sided Tissue and Polypropylene Tape Carton Sealer For 50mtr rolls on 75mm diameter cores, & cutting blade. Max diameter roll of tape 155mm. RBD25 Blades

RBD38 Blades

RBD50 Blades

25 mm

38 mm

50 mm

width

width

width

0.4kg

50 mm

0.8kg

width

TAPES & TAPE SYSTEMS

23

TAPES & TAPE SYSTEMS

Pacplus®

Bag Neck and Bench Tape Dispensers

Clean and easy way of sealing tops of polythene bags, use 9, 12 or 16mm coloured vinyl tape.

Bag Neck Tape Page 20

Tape Dispensers Our most popular Bag Neck Sealer

PD222T

Pacplus®

PD283

pes ide ta mm w rtical o 25 to any ve e t p u c Takes be fixed ntal surfa lade Can r horizo ming b o trim duty l ra g Inte Heavy tion ruc const

25mm Heavy Duty Bag Neck Sealer In metal with trimming blade & 12mm throat.

Trimming Blade

12-16

1.4kg

mm

widths RBBN25 Blades

Kinetix®

Pacplus®

PLBW9

BN25 9-12

Plastic Dispenser Can use 9-12mm tape.

mm

widths

Wide Neck Metal Dispenser With 12mm throat. Wide Neck Can use up to 16mm wide tapes.

12-16 mm

widths

0.6kg

with lade ing b imm roat r t tion l ra th struc Integ 7 mm m e con l fram and 12 m a t e mm ble m Dura es both 9 tapes tical Tak wide o any ver d t surface e ix f l be Can horizonta or

9-12mm Bag Neck Sealer In metal with trimming blade and 7mm throat.

9-12

Trimming Blade

mm

1.4kg RBBN25 Blades

Pacplus®

PD223T

widths

9-12mm Bag Neck Sealer In stainless steel & trimming blade & 7mm throat.

n uctio and onstr n teel c reparatio nts less s p e Stain for food environm 2 mm 1 e ble Suita lt-corrosiv9 mm and sa both tapesy vertical s e e k id a w n T d to al surface e fixe Can br horizonta o Stainless Steel

0.95kg

RBBN9 Blades

9-12

0.65kg

mm

RB2228 Trimming Blade

widths

RBBN9 Blades

Pacplus®

Pacplus®

BN9

E9

Wide Neck

Pacplus®

B2

h n wit uctio d constr prove r dutybase for im ie v a He ighted re ity stabilm tape co we m m /75apacity pes ta tr 25 m c /66 m r 3 mtrpen holde 3 s 25mm Bench Dispenser e Tak ntegral I For 25mm width on 25mm

and 75mm cores.

19-25 mm

1.4kg

widths

9-12 mm

ame etal frn m ble m Dura onstructioand 12 m c m m 9 s h e bot ide tap y vertical w to an ce Takes a d e fixe al surf Can br horizont o

widths

9-15 mm width

Metal Bag Neck Dispenser Can use 9-12mm tape.

Wide Neck Metal Dispenser 9-15mm heavy duty bag neck sealer with 16mm throat. With adjustable brake.

1.0kg RBBN9 Blades

24

ity up apac eck c bag n 16 mm struction e id W to ty con tapes y du m wide nism a m heav Extras up to 15ding mech ke Take tape loa stable bra Easy ith adju w

0.6kg RBE9 Blades

TAPES & TAPE SYSTEMS

Pacplus®

Pacplus®

PD326

BTD25

Economy Dual Core Bench Tape Dispenser Tape width: 25mm Tape length: 66mtr on 25mm core 33mtr on 75mm core

19-25 mm

widths

25mm Heavy Duty Bench Tape Dispenser For 1 x 25mm width on 25mm and 75mm core.

1.2kg

19-25 mm

widths

1.6kg RBB2 Blades

Large range of Technical Tapes available

Request a copy of our technical tapes brochure, full of innovative tapes to suit a wide range of industrial applications

Tape Dispensers Heavy Duty

HMB50 Heavy Duty Metal Bench Tape Dispenser For 2 x 25mm width roll or 1 x 50mm width.

n ructio be l const -meta , can also ll a , r base y duty al or Heav lip rubbe ny vertic Non-s xed to a surface or fi ed mm n 5 li c 2 in r 2 x ration pe reel fo Dual 50 mm o x 1

Pacplus®

Pacplus®

PD331P

PD317 Heavy Duty

25mm Heavy Duty Bench Tape Sealer In metal for 66mtr tapes on 75mm diameter core with blade protection attachment.

25-50 mm

25

mm width

19/25mm Standard Desk Tape Dispenser In plastic for 33mtr tapes on a 25mm core.

19-25 mm

widths

1.1kg

0.8kg

0.4kg

widths

RBHMB Blades

Our Best Selling Bench Tape Dispenser

BD50

Pacplus®

PD330 Manual Pre-Set Length Dispenser For filmic tape up to 25mm wide. Repeatable length of tape up to 75mm.

ser ispen es gth d p et len wide ta -s re mm nts ual p Man s up to 25 e increme Take mm tap en holder 75 lp ra g Inte

25 mm

0.8kg

widths

Pacplus®

PD380

ser ispen gth d e tapes et len pre-s 5 mm wid ent l a u Man s up to 7 e increm Take riable tap trol t Va con incremen pe Manual Pre-Set Length Dispenser um ta m axim of 200 m M For filmic tape up to 75mm wide.

Repeatable length of tape up to 200mm.

50mm Bench Dispenser For 1 x 50mm width roll or 2 x 25mm width roll on 75mm core. Can be screwed to bench and also wall mounted.

25-50 mm

widths

TAKES 132mtr TAPE

25-75

ed be fix also e , can ed surfac al e s a r b inclin ith integ bber w lip ru ical or n Non-s any vert struction operatio sed y to con for eas r increa etal All-m e bridge ion cap fo ty tap rotect safe r e p ork place 25 mm o Blad w r 2 x ration fo l e re pe Dual 50 mm o 1x

mm

0.8kg

widths

Pacplus®

Battery Powered

PD301

nser dispe pes ngth ta -set le m wide ts re p m n ic Electr up to 25 e increme ent Takes re-set tap pe increm ta 3p m u m Battery Powered Pre-Set Length Dispenser Maxim of 90 m

For filmic tape up to 25mm wide. Repeatable length of tape up to 90mm. 1.4kg

Requires 3 x R20/HP2 batteries

RBBD50 Blades

Pacplus®

CBD50

e w-fre r scre mp fo h cla fixing 5 mm Benc 2 r2x reel fo mm Dual or 1 x 50 on ti opera

50mm clamp-on Bench Dispenser For 1 x 50mm width roll or 2 x 25mm width roll on 75mm core with bench fixing clamp.

Better Packages

PD351

PS2A

75mm or 3 x 25mm Bench Mounted Tape Dispenser In metal for 66mtr tapes on 75mm diameter core with blade protection attachment.

Desk Clamp

TAKES 132mtr TAPE RBBD50 Blades

Pacplus®

25-50 mm

widths

0.65kg

25-75 mm

widths

25 mm

0.8kg

widths

Electronic Pressure Sensitive Tape Dispenser Delivers pre-set lengths of tape. Suitable for pressure sensitive tapes including masking & reinforced tapes from 6-50mm This item is available on width. Will dispense request and is not available lengths from on sale or return 20-999mm

25-50 mm

widths 1.45kg

1.45kg Electronic

TAPES & TAPE SYSTEMS

25

TAPES & TAPE SYSTEMS

Pacplus®

Offering one of the most comprehensive tape ranges available

Adhesive Tapes 35mu Vinyl Adhesive Tape

ore ives m sive g adhe e sealing er/ t n e iv z Solv ggress in free a ed ents onm be us Can re envir r film ie to colds nger carr nge of ra o a tr S in idths able Avail urs and w colo

Buff/Clear/Colours Width x 66mtr

Code

Colour

+ Suffix No.

BVT Buff CVT Clear WVT White RVT Red BLVT Blue DBLVT Dark Blue YVT Yellow GVT Green OVT Orange BKVT Black Rolls per case

9mm 9

8.90 8.90 8.90 8.90 8.90 8.90 8.90 8.90 8.90 8.90 192

144

Solvent Adhesive Width x 66mtr

Colour

+ Suffix No.

72

36

Hotmelt Adhesive Width x 66mtr + Suffix No.

BHP Buff CHP Clear Rolls per case

12mm 12

25mu Frugal PP Tape

75mm 75

24

elt e hotm nt-fre Solve adhesive onment ir v f n the e e range o r for Bette on a widtions d e a s c U appli

25mm 25

48mm 48

75mm 75

72

36

24

Code

Colour

Size

Box Qty.

Clear Clear Clear Clear Buff Clear Buff

18mm 25mm 48mm 75mm 48mm 48mm 48mm

96 72 36 24 36 36 36

TAPES & TAPE SYSTEMS

6

1-20 Cases

21-89 Cases

pe ty ta quali ironment oise v Low-n r the en range of e r fo Bette on a widtions Used applica

Code

Colour

Width

Length

Thickness

Clear Buff Clear Buff Buff Clear Clear Buff Clear

12mm 48mm 48mm 50mm 50mm 50mm 50mm 75mm 75mm

66mtrs 66mtrs 66mtrs 66mtrs 132mtrs 66mtrs 132mtrs 66mtrs 66mtrs

25mu 25mu 25mu 28mu 28mu 28mu 28mu 35mu 35mu

Full Pallet 90 Cases 5.60 5.60 5.60 5.60 5.60 11.00 11.00

5.90 5.90 6.70 13.0 6.70 13.0

36

23mu PP Economy Tape

e grad omy Econ ing tape pack

Acrylic Adhesive 48mm x 66mtr

Colour

Clear ECP48 Buff EBP48 Rolls per case

Full Pallet 90 cases 18mm: 8640 Rolls 25mm: 6480 Rolls 48mm: 3240 Rolls 75mm: 2160 Rolls

BCP48132 x 132mtrs per roll BBP48132 x 132mtrs per roll

BCP18 BCP25 BCP48 BCP75 BBP48 BCP48132 BBP48-132

12.6 12.6 12.6 12.6 12.6 12.6 12.6 12.6

CLN12 EBLN48 ECLN48 BLN50 BLN48132 CLN50 CLN48132 BLN75 CLN75 Rolls per case

Code

for tion pe op sage u ost ta Low-c h-volume stock in a hig from idths able Avail nge of w ra

Acrylic Adhesive Width x 66mtr

Colour Buff Clear Blue Red Yellow Green White Black

Acrylic Adhesive

6.00 6.00 144

Code BMP48 CMP48 BLUMP48 REDMP48 YELMP48 GMP48 WHIMP48 BLKMP48 Rolls per case

24

es e giv hesiv sealing nt ad e Solve ggressiv freezer/ a more be used in onments Can re envir icron to colds icker 28 m Th r film carrie

36

Polypropylene Adhesive Tape

26

36

6.65 6.65

Colour

ier film n carr ss roll micro le er 28 ngth for me k ic h T er le wnti Long ange do a range ch ble in a Avail of colours

PP Low Noise Tape

48mm 50

BSP Buff CSP Clear Rolls per case

Code

Hotmelt Adhesive 48mm x 990mtr

12mm 25mm 48mm 50mm 75mm 12 25 48 75 50

28mu PP Adhesive Tape

Code

28mu PP Machine Rolls

Automatic bundling machine and bundling tapes now available Please go to page 92 for more details.

4.95 4.95 36

Large range of Technical Tapes available

Request a copy of our technical tapes brochure, full of innovative tapes to suit a wide range of industrial applications

Printed Tapes

Printed Message Tapes An essential method of communicating handling instructions to package handlers and couriers

TAPES & TAPE SYSTEMS

ium prem e s i no pe Low- uality ta le ib q ly vis High ssage me

14

printed text tapes available from stock

Transtext Printed Message Tape Code

Message

Code

Tape Type

TW60FRA-V Fragile TW60FRA Fragile TW60CCSS Contents Checked Security Sealed GHWC Glass Handle With Care TW60CPMT Caution TW60REJ Reject TW60AWI Awaiting Inspection Rolls per case

50mm x 66mtr

6.80 6.70 6.70 6.70 6.75 6.65 6.70

Vinyl Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene 36

HIGH QUALITY LOW NOISE MESSAGE TAPES

Message

TW60HAN Handle With Care TW60QCH Q.C. Hold TW60QCI Q.C. Inspected TW60QCR Q.C. Rejected TW60QUA Quarantine TW60TWU This Way Up TW60SEC Security Rolls per case

Tape Type Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene

6.85 6.75 6.65 6.65 6.70 6.70 6.70 36

Undergound Warning Tapes 150mm x 365mtr Non-Adhesive Polythene Tape

Code

Message

Code

CBT150-EC Caution Electric Cable CBT150-FO Caution Fibre Optic CBT150-GM Caution Gas Main

6.65

Message 6.65

CBT150-SL Caution Street Light CBT150-TC Caution Telephone Cable CBT150-WP Caution Water Pipe

Polythene Barrier Tape Non-Adhesive Polythene Tape 30 micron thickness

70mm x 500mtr in dispenser box (10 per carton)

Code

ly rapid ible, ier rr ly vis High loyed ba enient dep in conv n rto ed Pack penser ca oice dis ble in ch a il a u v A lo rs of co

Tamper Evident Security Tapes are now part of the new Xtegra® Tegracheck® range of security optimised packaging products.

Colour

PBT70RW Red/White PBT70YB Yellow/Black

6.75 6.75

Please go to page 18 for more details.

TAPES & TAPE SYSTEMS

27

High quality, specialist tapes for a wide range of industrial applications

Adhesive Tapes Cloth Tape

Masking Tape

Laminated Polycoated Cloth Width x 50mtr

General Purpose Solvent Adhesive

25mm: 24 Rolls/Case 50mm: 24 Rolls/Case 75mm: 16 Rolls/Case 90mm: 12 Rolls/Case 60 cases per pallet

ssive aggre with t loth lity c hesive r resistan a u q ad eathe High idths and w nge of w f o rpro a ra Wate ilable in colours Ava and -tear Easy

Special roll widths available on request

Code

Colour

Size

PCT25-S PCT50-B PCT50-W PCT50-S PCT75-B PCT75-W PCT75-S PCT90-B PCT90-W PCT90-S

Silver Black White Silver Black White Silver Black White Silver

25mm x 50m 50mm x 50m 50mm x 50m 50mm x 50m 75mm x 50m 75mm x 50m 75mm x 50m 90mm x 50m 90mm x 50m 90mm x 50m

5.50 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0

Aluminium Foil Tape With silicon release liner Available in 30 & 40mu

e d tap fast: Hold lity bran sive ua he igh q olvent ad oval h n w s Our o h quality tape rem Hig idue-free use ing Res after ing, pack ip ask for m mansh Used d drafts an

: pe Tesa brand ta e iv Tesa dhes nised solvent a moval g o c ty Re re quali tape High idue-free use ing Res after ing, pack ip ask for m mansh Used d drafts an

Code

Size

Rolls per Case

MSK 12 MSK 19 MSK 25 MSK 38 MSK 50 MSK 75 MSK 100

12mm x 50mtr 19mm x 50mtr 25mm x 50mtr 38mm x 50mtr 50mm x 50mtr 75mm x 50mtr 100mm x 50mtr

144 Rolls/Case 96 Rolls/Case 72 Rolls/Case 48 Rolls/Case 36 Rolls/Case 24 Rolls/Case 18 Rolls/Case

9.0 9.0 9.0 9.0 9.0 9.0 9.0

144 Rolls/Case 96 Rolls/Case 72 Rolls/Case 48 Rolls/Case 36 Rolls/Case 24 Rolls/Case 18 Rolls/Case

9.5 9.0 9.2 9.0 8.7 11.1 8.1

Masking Tape TESA 4323 4323-12 4323-19 4323-25 4323-38 4323-50 4323-75 4323-100

nt sista eat-re truction s and h roof ely in con stries rp te Wa xtensiv on indu idths e ti w Used d installa range of an le in a ses knes ab r Avail and thic ase line le n re Silico

Code

Size

Thickness

Rolls per Case

AFT25 AFT38 AFT50 AFT2540 AFT3840 AFT5040

25mm x 45mtr 38mm x 45mtr 50mm x 45mtr 25mm x 45mtr 38mm x 45mtr 50mm x 45mtr

30mu 30mu 30mu 40mu 40mu 40mu

48 Rolls/Case 36 Rolls/Case 24 Rolls/Case 48 Rolls/Case 36 Rolls/Case 24 Rolls/Case

12mm x 50mtr 19mm x 50mtr 25mm x 50mtr 38mm x 50mtr 50mm x 50mtr 75mm x 50mtr 100mm x 50mtr

28mu Coloured PP Tape 11.1 11.1 11.1 12.0 12.0 12.0

r film carrie icron colours m 8 g er 2 ape Thick ld, solid t lour codin ts Bo l for co onen p u m f Use cts or co uction u prod ring prod du runs

Acrylic Adhesive 50mm x 66mtr

Self Adhesive Kraft Paper Tape

ng r lasti longe e for r iv s e n h arrie nt ad adhesio ty kraft c ing li Solve k h qua ished pac ig h r, n y fin -tea Easy fessionall sentatio re Pro and p

ECO15

Code

Size

Rolls per Case

ECO25 ECO38 ECO50 ECO75

25mm x 50mtr 38mm x 50mtr 50mm x 50mtr 75mm x 50mtr

72 Rolls/Case 48 Rolls/Case 36 Rolls/Case 24 Rolls/Case

28

TAPES & TAPE SYSTEMS

9.40 9.40 9.40 9.40

Code

Colour

WSP50 RCP50 BLCP50 GCP50 YCP50 Rolls per case

White Red Blue Green Yellow

6.65 6.65 6.65 6.65 6.65 36

Large range of Technical Tapes available

Request a copy of our technical tapes brochure, full of innovative tapes to suit a wide range of industrial applications

Double Sided Tissue Tape

Double Sided PP Film Tape

Suitable for bonding paper and board applications

Solvent adhesive Suitable for many industrial applications, including fixing carpets.

2DE: TD11 feature pe for n ta r-lift Finge wider tha plication liner l after ap : e s a Rele remova /TD1150 pe easy TD125 tissue ta 19: -tear Easy N12/TRN with se TR for u nser le b Suita 18 dispe pe PD9 r-free ta Carrie

Code

Size/Description

Rolls per Case

TD112DE TD125 TD150 TRN12 TRN19

12/18mm x 50mtr DS Finger Lift Tape 25mm x 50mtr Tissue Tape 50mm x 50mtr Tissue Tape 12mm x 33mtr Transfer Tape 19mm x 33mtr Transfer Tape

40 Rolls/Case 144 Rolls/Case 96 Rolls/Case 72 Rolls/Case 36 Rolls/Case

5.4 16.4 16.4 5.0 8.0

ed le-sid doub riced me usage p ly ive h-volu eal petit Com pe for hig dhesive id ta lvent a ial r t s u o d S for in cations appli

Code

Size

Rolls per Case

DST25-25 DST50-25

25mm x 25mtr 50mm x 25mtr

36 Rolls/Case 18 Rolls/Case

6.0 6.0

Double Sided Cloth Tape ssive aggre g and ape n ro t t s d mely -side Extre double resistant nd ra Wate flooring ions cat d to Suite trial appli indus

Double Sided Polypropylene Tape Holtmelt Adhesive Suitable for general purpose applications

Code

Size

Rolls per Case

TD250

50mm x 50mtr

24 Rolls/Case

16.4

Double Sided Premium Polyester Tape

Code

Size

Rolls per Case

DST12 DST19 DST25 DST50

12mm x 50mtr 19mm x 50mtr 25mm x 50mtr 50mm x 50mtr

144 Rolls/Case 96 Rolls/Case 72 Rolls/Case 36 Rolls/Case

16.4 16.4 16.4 16.4

Double Sided Polypropylene Tape Heavy Duty UPVC Acrylic Adhesive Permanent bonding to most substrates, resistant to ageing, temperature and UV changes.

Premium Acrylic/ Solvent Adhesive Ideal for mounting on ABS plastics in industrial applications.

hoice ium c Prem use with for lastics p ABS

Code

Size

Rolls per Case

DST4965

50mm x 50mtr

24 Rolls/Case

17.55

Double Sided Foam Tape & Pads en unev n to catio appli ces d n r a fo ble surfa mounting Suita s y ispla plication -cut d r fo p re Used raphics a pe and p g in ta the roll able Avail pads on

pe ed ta le-sid ruction b u o y d d const and y dut n Heav ustrial a strength d in oved tance r for p m sis eI usag ageing re

Code

Size

Rolls per Case

DST9V DST25V DST50V

9mm x 50mtr 25mm x 50mtr 50mm x 50mtr

128 Rolls / Case 48 Rolls / Case 24 Rolls / Case

18.70 19.65 19.70

Code

Size

Quantity

DFP25 DFP12 DFT20 DFT25

25mm x 25mm x 1.6mm Pads 12mm x 25mm x 1.6mm Pads 20mm x 20mtr x 1.6mm Tape 25mm x 25mtr x 1.6mm Tape

1,250/Roll 2,500/Roll 12Rolls/ctn 12Rolls/ctn

TAPES & TAPE SYSTEMS

0.30 0.53 0.20 0.20

29

TAPES & TAPE SYSTEMS

Adhesive Tapes

High quality, specialist tapes for a wide range of industrial applications

Adhesive Tapes Crossweave Reinforced Tape

Monoweave Reinforced Tape

and ngth nce e r t s a bond resist High um tear range of optimlable in a m max. Avai s to 75 m width

tive erna t l a t ve r cos Lowe crosswea o d t orce reinf e tap

Code

Size

Rolls per Case

CRT12 CRT19 CRT25 CRT38 CRT50 CRT75

12mm x 50mtr 19mm x 50mtr 25mm x 50mtr 38mm x 50mtr 50mm x 50mtr 75mm x 50mtr

72 Rolls/Case 48 Rolls/Case 36 Rolls/Case 24 Rolls/Case 18 Rolls/Case 12 Rolls/Case

7.20 7.20 7.20 7.20 7.20 7.20

Code

Size

Rolls per Case

MONO25 MONO50

25mm x 50mtr 50mm x 50mtr

36 Rolls/Case 18 Rolls/Case

7.20 7.20

Clear Stationery Tape Solvent Adhesive 25mm x 66mtr

Strapping Tape

e hesiv ive nt ad ss Solve re aggre mo gives sealing r ble fo Suita use office

Self Adhesive Code CST25 Rolls per case

6.65 72

ative ltern ost a eave c r e Low crossw to orced reinf e tap

Code

Size

ST1966-BLK 19mm x 66mtr SP1966-OR 19mm x 66mtr

Colour

Tamper Evident Security Tapes are now part of the new Xtegra® Tegracheck® range of security optimised packaging products.

per Pack

Please go to page 18 for more details.

Black 48 Orange 48

Hook & Loop Coins

Hook & Loop Strips

Self Adhesive

Self Adhesive

Code

Size

HLCA-19B HLCA-19W

19mm diameter Black 19mm diameter White

30

Colour

TAPES & TAPE SYSTEMS

per Roll

Code

Size

Colour

per Roll

125 125

HLSA-20B HLSA-20W

25mm x 5mtr 25mm x 5mtr

Black White

125 125

Essential products for a safer working environment

Your one-stop tape dispenser supplier, offering the best in quality, price & service.

TAPES & TAPE SYSTEMS

Marcwell

marc ell systems

floor marking tape

The innovative, simple to operate floor marking system Floor Marking Tape 50mm x 33mtr

HEAVY DUTY PREMIUM INDUSTRIAL QUALITY

Hazard Warning Tape

Code

Colour

Rolls/Box

50mm x 33mtr

LMT50W LMT50B LMT50R LMT50Y LMT50G LMT50OR LMT50LB LMT50BLK

White Blue Red Yellow Green Orange Light Blue Black

18 18 18 18 18 18 18 18

75mm x 33mtr

0.4 0.4 0.45 0.4 0.45 0.4 0.4 0.4

HEAVY DUTY PREMIUM INDUSTRIAL QUALITY

Code

Colour

Rolls/Box

LMT75W LMT75R LMT75Y LMT75G

White Red Yellow Green

12 12 12 12

0.5 0.6 0.45 0.5

Code

HEAVY DUTY PREMIUM INDUSTRIAL QUALITY

Colour

HWT50YB Yellow/Black HWT50RW Red/White HWT50GW Green/White

Rolls/Box 18 18 18

0.4 0.4 0.4

Lane Marking Applicator Code

Colour

TL001

Lane marking Tape Applicator for tapes up to 100mm wide

6.9

TAPES & TAPE SYSTEMS

31

Optimax Range of Ultra Efficient Case Tapers

Optimax case tapers offer our distributors a great range to choose from, whilst representing exceptional value for money

Case Tapers ®

CT20U Incorporating the latest case taping technology, the CT20U Case Taper combines excellent performance and value for money. Its flexibility enables the CT20U to seal 150 - 500 mm wide and 120 500 mm high cartons. Specifications: Tape Width: Belt Speed: Power Supply:

1.5” & 2” 23 m/min (9-20 cartons/min) 100/110/220/230/240v, 50/60Hz, 1-phase Power Consumption: 450w

semi-automatic case taper

Infeed & Outfeed Roller Tables plus castors as standard

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CT20U options include: > 3" Tape head > Safety guard

CT20U semi-automatic case taper Min Max L: 120 ∞ W: 150 500 H: 130 500

H

W

ce rman Perfo alue for v and oney m

L

®

CT30R Automatically adjusting to accommodate varying carton dimensions, and with a maximum speed of 1,200 cartons per hour, the CT30R provides heavy duty, reliable case taping for high-volume packing and despatch areas.

semi-automatic, air-assisted,‘randomsize’case taper

Infeed & Outfeed Roller Tables plus castors as standard

The CT30R is an air assisted model that requires a compressed air supply. Please contact our technical service centre for more information.

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CT30R options include: Specifications: > 3" Tape head Tape Width: 1.5” & 2” > Safety guard Belt Speed: 23 m/min (9-20 cartons/min) Power Supply: 220v-240v, 50/60Hz, 1-phase (100-110v & 60Hz machines are available on request) Power Consumption: 450w

Min Max L: 120 ∞ W: 150 500 H: 130 500

H

W

CT30R semi-automatic case taper

for justston d a Autodom car ran sizes

L

Flexible conveyor system

®

GTL400-3 1.5 - 4.5 mtr flexible outfeed conveyor. 400 mm wide, adjustable height with locking castors.

GTL400-3 flexible conveyor system

32

TAPES & TAPE SYSTEMS

62kg

films & polythene products Grip Seal Bags Polythene Bags Polythene Carrier Bags Tenzalopes® Packing List Envelopes Polythene Sheeting & PVC Shrink Film Optimax® Heat Shrink Chambers Shrink Film Systems Pacseal Heat Sealers Pro-Seal Impulse Heat Sealers Opti-seal Industrial Heat Sealers Protective Sleeving Anti-Static Packaging Ripack Shrink Film Systems Pacplus® Shrink Film Systems Polythene Shrink Films Stretch Films Stretch Film Dispensers Optimax® Stretch Film Turntables

34 35 37 38 39 40 42 44 45 46 48 48 49 50 51 52 52 53

FILMS & POLYTHENE PRODUCTS

> > > > > > > > > > > > > > > > > >

FILMS & POLYTHENE PRODUCTS

33

Choose from over 70 types of high quality grip seal bags suitable for a range of applications

Grip Seal Polythene Bags Grip Seal Bags Premium Duty Plain

PREMIUM DUTY

We will accept orders for less than an outer case with no extra surcharge on all Grip Seal Bags

Grip Seal Bags

PREMIUM DUTY

Premium Duty Write-on Panels

45mu Size Code (inches)

Qty per outer

SG0 1.5 x 2.5 SG1 2.25 x 2.25 SG2 2.25 x 3 SG3 3 x 3.25 SG4 3.5 x 4.5 SG5 4.5 x 4.5 SG6 4 x 5.5 SG7 5.5 x 5.5 SG8 3 x 7.5 SG9 5 x 7.5 SG105 2 x 9

50,000 40,000 30,000 20,000 20,000 20,000 16,000 8,000 12,000 8,000 16,000

50mu 0.4 0.5 0.8 0.9 1.4 1.95 2.15 2.75 2.1 3.15 0.5

45mu

Qty per Size Code (inches) outer 6,000 SG10 7.5 x 7.5 C5 6,000 SG11 6 x 9 4,000 SG12 8 x 11 SGA4 9x12.75 C4 2,000 SG13 12.75x12.75 2,000 2,000 SG14 10 x 14 1,000 SG15 11 x 16 SG16 13 x 18 C3 1,000 1,000 SG17 15 x 20

Grip Seal Bags

Code 0.4 0.75 0.95 1.55 2.05 2.15 3.2 1.8 3.1

HEAVY DUTY

87.5mu (350g) Extra Heavy Duty Plain

SG020 SG120 SG121 SG122 SG123 SG124 SG125 SG126 SG127 SG128

STANDARD DUTY

Standard Duty Plain

40mu

45mu

Code

Size (inches)

Qty per outer

LG0 LG1 LG2 LG3 LG4 LG5 LG6 LG7 LG8 LG9

1.5 x 2.5 2.25x2.25 2.25 x 3 3 x 3.25 3.5 x 4.5 4.5 x 4.5 4 x 5.5 5.5 x 5.5 3 x 7.5 5 x 7.5

50,000 40,000 30,000 20,000 16,000 12,000 10,000 8,000 12,000 6,000

0.4 0.6 0.7 0.9 1.25 1.55 1.65 2.20 1.75 2.75

Size (inches) 1.5 x 2.5 2.25 x 2.25 2.25 x 3 3 x 3.25 3.5 x 4.5 4.5 x 4.5 4 x 5.5 5.5 x 5.5 3 x 7.5 5 x 7.5

Qty per outer 50,000 40,000 30,000 20,000 20,000 20,000 16,000 8,000 12,000 8,000

0.4 0.5 0.8 0.9 1.4 1.95 2.15 2.75 2.1 3.15

Size Qty per Code (inches) outer

Qty per outer

Size (inches)

LG10 LG11 LG12 LG13 LG14 LG15 LG16 LG17 LGA4

7.5 x 7.5 4,000 6x9 4,000 8 x 11 3,000 12.75x12.75 1,000 10 x 14 2,000 11 x 16 1,000 13 x 18 1,000 15 x 20 1,000 9 x 12.75 2,000

4.30 4.05 6.05 11.8 10.9 12.2 15.7 20.95 8.05

3.5 x 4.5 5x8 7 x 10 8 x 12

12,000 4,000 2,000 2,000

2.0 5.75 9.25 12.8

FILMS & POLYTHENE PRODUCTS

WT50 9 x 14 1,000 WT60 12 x 16 500 WT70 10 x 18 500

Grip Seal Bags

16.0 24.4 22.4

STANDARD DUTY

Standard Duty Write-on Panels

45mu

Code

Size (inches)

Qty per outer

LG020 LG120 LG121 LG122 LG123 LG124 LG125 LG126 LG127 LG128

1.5 x 2.5 2.25x2.25 2.25 x 3 3 x 3.25 3.5 x 4.5 4.5 x 4.5 4 x 5.5 5.5 x 5.5 3 x 7.5 5 x 7.5

50,000 40,000 30,000 20,000 16,000 12,000 10,000 8,000 12,000 4,000

0.4 0.5 0.7 0.85 1.3 1.6 1.7 2.25 8.9 9.4

New range of Self-Seal Polythene Bags now available! 34

4.9 4.3 7.05 9.0 10.5 14.25 18.4 22.0 7.4

Size Qty per Code (inches) outer

40mu

Code

Qty per Size outer (inches) SG129 7.5 x 7.5 6,000 C5 6,000 SG130 6 x 9 4,000 SG131 8 x 11 SG132 9x12.75 C4 2,000 2,000 SG133 10 x 14 1,000 SG134 11 x 16 SG135 13 x 18 C3 1,000 1,000 SG136 15 x 20 MB70 6”x9” + 6”x8” pouch 4,000 Specimen Bags Code

87.5mu

WT10 WT20 WT30 WT40

Grip Seal Bags

50mu

Code

Size (inches)

Qty per outer

LG129 LG130 LG131 LG132 LG133

7.5 x 7.5 6x9 8 x 11 9 x 12.75 10 x 14

6,000 4,000 3,000 2,000 2,000

See page 39 for more details

1.7 3.1 4.6 4.1 6.25

Essential polythene products for retail, commercial and industrial packaging

Polythene Bags Slider Grip Seal Bags Premium Duty Plain

HEAVY DUTY

FILMS & POLYTHENE PRODUCTS

or ism f chan urate e m r c Slide and ac after rapid re, time closu time.

75mu Code

Qty Size (mm) per box

SLG10 SLGA4 SLG2015 SLG2216 SLG2432

250 x 175 225 x 315 200 x 150 200 x 160 240 x 320

1,000 1,000 300 300 300

Code

Qty Size (mm) per box

SLG2517 SLG3223 SLG3625 SLG3925

250 x 175 320 x 230 360 x 250 390 x 250

300 300 300 300

Polythene Bags Price per pack quantity

Light Duty Polythene Bags 100 gauge (25mu)

Light Duty Polythene Bags 120 gauge (30mu)

Code

Type

Code

Type

PB7910 PB81010 PB101210 PB101510 PB121510 PB121810 PB152010 PB182410 PB243610

Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag

PB4612 PB61012 PB7912 PB81012 PB101212 PB121812 PB182412 PB202412 PB364812

Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag

Width (inches) 7 8 10 10 12 12 15 18 24

Height (inches) 9 10 12 15 15 18 20 24 36

Thickness Pack (gauge) Qty 100 1000 100 1000 100 1000 100 1000 100 1000 100 1000 100 1000 100 1000 100 1000

Width (inches) 4 6 7 8 10 12 18 20 36

Height (inches) 6 10 9 10 12 18 24 24 48

Thickness (gauge) 120 120 120 120 120 120 120 120 120

Pack Qty 1000 1000 1000 1000 1000 1000 500 500 125

Medium Duty Polythene Bags 200-250 gauge (50-62.5mu)

Heavy Duty Polythene Bags 400-800 gauge (100-200mu)

Code

Type

Code

Type

PB4820 PB6820 PB61020 PB7920 PB81020 PB81220 PB101220 PB101520 PB121520 PB121820 PB152020 PB182420 PB203020 PB364820 PB4625 PB5725 PB81025 PB81425 PB101225 PB121825 PB122425 PB162025 PB202425 PB364825

Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag

PB4640 PB6840 PB61040 PB81040 PB101240 PB101540 PB121840 PB152040 PB182440 PB203040 PB243640 PB7950 PB81250 PB81550 PB101250 PB121850 PB182050 PB182450 PB203050 PB243650 PB305050 PB364850 PB254080

Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag Polythene Bag

Width (inches) 4 6 6 7 8 8 10 10 12 12 15 18 20 36 4 5 8 8 10 12 12 16 20 36

Height (inches) 8 8 10 9 10 12 12 15 15 18 20 24 30 48 6 7 10 14 12 18 24 20 24 48

Thickness Pack (gauge) Qty 200 1000 200 1000 200 1000 200 1000 200 1000 200 1000 200 500 200 500 200 500 200 500 200 500 200 500 200 500 200 100 250 1000 250 1000 250 1000 250 1000 250 1000 250 1000 250 1000 250 500 250 250 250 100

Width (inches) 4 6 6 8 10 10 12 15 18 20 24 7 8 8 10 12 18 18 20 24 30 36 25

Height (inches) 6 8 10 10 12 15 18 20 24 30 36 9 12 15 12 18 20 24 30 36 50 48 40

New range of Self-Seal Polythene Bags now available!

Thickness Pack (gauge) Qty 400 1000 400 500 400 500 400 500 400 250 400 250 400 250 400 100 400 200 400 100 400 100 500 1000 500 500 500 250 500 500 500 500 500 100 500 200 500 100 500 100 500 50 500 50 800 50

See page 39 for more details

FILMS & POLYTHENE PRODUCTS

35

Over 60 polythene bag lines to choose from

Polypropylene & Polythene Bags Clear Polythene Self Seal Bags

Clear Polypropylene Self Seal Bags 40 Silver Anti-Static

With Child Warning Notice Code

Size (mm)

Description

SPP0406 40mm x 60 SPP0507 50mm x 70 SPP0518 50mm x 180 SPP0608 60mm x 80 SPP0624 60mm x 240 SPP0710 70mm x 100 SPP0812 80mm x 120 SPP0818 80mm x 180 SPP1010 100mm x 100 SPP1015 100mm x 150 SPP1020 100mm x 200 SPP1025 100mm x 250 SPP1122 110mm x 220 SPP1212 125mm x 125 SPP1218 120mm x 180 SPP1270 125mm x 700 SPP1318 130mm x 180 SPP1518 150mm x 180 SPP1520 155mm x 200 SPP1525 150mm x 250 SPP1532 150mm x 320 SPP1622 160mm x 220 SPP1624 165mm x 240 SPP1825 180mm x 250 SPP2228 220mm x 280 SPP2231 220mm x 310 SPP2235 220mm x 350 SPP2332 230mm x 320 SPP2525 250mm x 250 SPP2535 250mm x 350 SPP2738 270mm x 380 SPP3040 300mm x 400 SPP3045 300mm x 450 SPP3340 330mm x 400 SPP3545 350mm x 450 SPP4060 400mm x 600 SPP4570 450mm x 700

40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags 40mu Clear Polypropylene Self Seal Bags

Qty/ Box 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 250

Clear Polythene Self Seal Bags Code SSP10 SSP12 SSP15 SSP16 SSP20 SSP22 SSP23 SSP25 SSP26 SSP30 SSP35 SSP40 SSP45

36

Size (mm) 100 x 100 120 x 200 150 x 250 160 x 220 200 x 280 220 x 310 230 x 340 250 x 180 260 x 400 300 x 420 350 x 450 400 x 600 450 x 700

Description 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags 50mu Clear Polythene Self Seal Bags

FILMS & POLYTHENE PRODUCTS

Qty/Box 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 250

Code CWSSP20 CWSSP23 CWSSP35 CWSSP45 CWSSP26 CWSSP30

Size (mm) 200 x 280 230 x 340 350 x 450 450 x 700 260 x 400 300 x 420

Description Child Warning Notice Child Warning Notice Child Warning Notice Child Warning Notice Child Warning Notice Child Warning Notice

Qty/Box 1000 1000 1000 250 1000 1000

Polythene Layflat Tubing 250 gauge (62.5mu)

Code

Size (inches)

Average Approx. Length/Roll Weight/Roll

PT252 PT253 PT254 PT255 PT256 PT258 PT259 PT2510 PT2512 PT3150 PT2515 PT2518 PT2524 PT2536 PT2536BK

2” 3” 4” 5” 6” 8” 9” 10” 12” 12” 15” 18” 24” 36” 36” Blk

335mtr 335mtr 335mtr 335mtr 335mtr 335mtr 335mtr 335mtr 335mtr 150mtr 335mtr 466mtr 349mtr 233mtr 233mtr

2 Kgs 3 Kgs 4 Kgs 5 Kgs 6 Kgs 8 Kgs 9 Kgs 10 Kgs 12 Kgs 5.5kgs 15 Kgs 25 Kgs 25 Kgs 25 Kgs 25 Kgs

2.00 3.00 4.00 5.00 6.00 8.00 9.00 10.00 12.00 5.50 15.00 25.00 25.00 25.00 25.00

2” 3” 4” 6” 7” 8” 9” 10” 12” 24”

168mtr 168mtr 168mtr 168mtr 168mtr 168mtr 168mtr 168mtr 168mtr 183mtr

2 Kgs 3 Kgs 4 Kgs 6 Kgs 7 Kgs 8 Kgs 9 Kgs 10 Kgs 12 Kgs 25 Kgs

2.00 3.00 4.00 6.00 7.00 8.00 9.00 10.00 12.00 25.00

500 gauge (125mu)

PT502 PT503 PT504 PT506 PT507 PT508 PT509 PT5010 PT5012 PT5024

Polythene Drawstring Bags Plain

Code PDB15 PDB10 PDB25

Size (mm) 150 x 210 50mu 100 x 150 50mu 250 x 370 50mu

Description Polythene Drawstring Bags Polythene Drawstring Bags Polythene Drawstring Bags

Qty/Box 1000 1000 1000

Essential polythene products for retail, commercial and industrial packaging

Polythene Bags & Layflat Tubing Clear Gusseted Polypropylene Self Seal Bags

Clear Gusseted Polythene Bags Plain

Code SPP2738S SPP3040S

Size Qty/Box 270mm x 380mm with 60mm Gusset 1000 300mm x 400mm with 60mm Gusset 1000

FILMS & POLYTHENE PRODUCTS

50mu Silver Anti-Static

(12mu)

Code GPB3070-12 GPB4050-12 GPB4090-12 GPB60120-12 GPB60130-12 GPB6060-12

Film Unrollers With integral separator bar

Size 300mm x 700mm plus 200mm 400mm x 500mm plus 300mm 400mm x 900mm plus 300mm 600mm x 1200mm plus 500mm 600mm x 1300mm plus 400mm 600mm x 600mm plus 400mm

Qty/Box 1000 1000 1000 1000 1000 250

600 x 1000mm plus 400mm

500

1000 x 1800mm plus 700mm 1200 x 2300mm plus 800mm 1200 x 1800mm plus 800mm 200 x 500mm plus 100mm 250 x 600mm plus 150mm 300 x 700mm plus 200mm 400 x 1100mm plus 300mm 600 x 1000mm plus 400mm 600 x 600mm plus 400mm 600 x 800mm plus 400mm 700 x 1400mm plus 500mm 800 x 1200mm plus 400mm

75 50 50 1000 500 500 500 250 250 250 150 150

1000 x 1800mm plus 700mm 100 x 200mm plus 50mm 1200 x 2300mm plus 800mm 1200 x 1800mm plus 800mm 150 x 350mm plus 80mm 200 x 500mm plus 100mm 250 x 600mm plus 150mm 300 x 700mm plus 200mm 400 x 900mm plus 300mm 400 x 1100mm plus 300mm 600 x 1000mm plus 400mm 600 x 1200mm plus 500mm 700 x 1400mm plus 500mm 800 x 1200mm plus 400mm 800 x 1600mm plus 600mm 900 x 1800mm plus 700mm

40 500 25 25 500 500 250 250 250 250 125 125 75 75 75 40

1200 x 1800mm plus 800mm 400 x 900mm plus 300mm 400 x 500mm plus 300mm 600 x 1200mm plus 500mm 600 x 1000mm plus 400mm 800 x 1600mm plus 600mm 800 x 1400mm plus 600mm

25 150 150 60 75 40 40

(30mu)

GPB60100-40-30 (50mu)

Code

Size

300WB 450WB 600WB

300mm 450mm 600mm

GPB100180-70-50 GPB120230-80-50 GPB120180-80-50 GPB2050-10-50 GPB2560-15-50 GPB3070-20-50 GPB40110-30-50 GPB60100-40-50 GPB6060-40-50 GPB6080-40-50 GPB70140-50-50 GPB80120-40-50

Also suitable for use with Polythene Layflat Tubing

Layflat Tubing Dispenser

(100mu)

GPB100180-70-100 GPB1020-5-100 GPB120230-80-100 GPB120180-80-100 GPB1535-8-100 GPB2050-10-100 GPB2560-15-100 GPB3070-20-100 GPB4090-30-100 GPB40110-30-100 GPB60100-40-100 GPB60120-50-100 GPB70140-50-100 GPB80120-40-100 GPB80160-60-100 GPB90180-70-100

Adjustable from 400mm – 1050mm. Will hold tubing up to 40kg in weight Code

Description Telescopic layflat tube dispenser

TLD40

Polythene Carrier Bags Specify Colour: White - /WH Blue - /BL Please add appropriate suffix to product code for colour required.

(150mu)

GPB120180-80-150 GPB4090-30-150 GPB4050-30-150 GPB60120-50-150 GPB60100-40-150 GPB80160-60-150 GPB80140-60-150 180/360 Vari Gauge

Code

Size

Colour

Qty/case

PCB01-WH PCB01-BL PCB02-WH

15” x 18” x 3” 15” x 18” x 3” 22” x 18” x 3”

White Dark Blue White

500 500 500

10.00 10.00 15.00

Anti-Static Layflat Tubing

Patch Handle 120g

Code

Size

PCB03-WH 15” x 18” x 3”

Colour

Qty/case

White

500

6.00

High Density Candy Stripe Carriers

PCB05

11” x 17” x 21”

Red/White Stripe 2000 Blue/White Stripe 2000

7.50 7.50

Code

Size

AST2512-150 AST256-150

12" 6"

Roll x 250g Roll x 250g

Pink Pink

150mtr/roll 150mtr/roll

FILMS & POLYTHENE PRODUCTS

37

Polythene consumable products used in packing, despatch and office environments

Tenzalopes® Products Packing List Envelopes

We are now the UK’s leading supplier of Packaging List Envelopes

Code Message

sizes can be mixed to obtain quantity price

A7PL A7DE A6PL A6DE A5PL A5DE A4PL A4DE DLPL DLDE

Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed

Bio-Degradeable Packing List Envelopes

Int. sizes (mm)

Qty/ box

113 x 100 113 x 100 165 x 122 165 x 122 225 x 165 225 x 165 318 x 235 318 x 235 225 x 122 225 x 122

1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000

PCNE Penalty Charge Notice Envelopes Low-tack adhesive

Code

Message

Int. sizes (mm)

Qty/ box

A7GRPL A7GRDE A6GRPL A6GRDE A5GRPL A5GRDE A4GRPL A4GRDE DLGRPL DLGRDE

Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain Printed Documents Enclosed Plain

113 x 100 113 x 100 165 x 122 165 x 122 225 x 165 225 x 165 318 x 235 318 x 235 225 x 122 225 x 122

500 500 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

38

FILMS & POLYTHENE PRODUCTS

2.4 2.4 3.95 3.95 7.55 7.55 6.9 6.9 4.45 4.45

Int. sizes Qty/ Code Message (mm) box PCNE Printed Penalty 132.5 x 115 1000 Charge Notice

2.4 2.4 3.95 3.95 7.55 7.55 6.9 6.9 4.45 4.45

Essential Shrink Film and Top Cover products available in a variety of sizes and thicknesses

Polythene Products Polyolefin Shrink Film

y clarit ture film ra High k tempe ent shrin Low requirem shrink d n a seal le Fast cyc

and tries indus food rage r lar fo ved cold sto ing irregu items p Appro wrap g multiple r fo lin ble Suita and bundrecyclable ecome es Easily or b shap olour age c is ith n't d Does brittle w

Code

Size

PVC20 PVC25 PVC30 PVC35 PVC40 PVC45 PVC50

200/400mm x 600mtr x 19mu 250/500mm x 600mtr x 19mu 300/600mm x 600mtr x 19mu 350/700mm x 600mtr x 19mu 400/800mm x 600mtr x 19mu 450/900mm x 600mtr x 19mu 500/1000mm x 600mtr x 19mu

6.95 7.6 8.1 10.1 11.9 12.7 13.9

Pouch Tape 330 labels per roll Label Size: 150mm x 200mm 12/Box

FILMS & POLYTHENE PRODUCTS

P.V.C. Shrink Film

Code

Size

PLO25 PLO30 PLO35 PL03019

250/500mm x 1335mtr x 15mu 300/600mm x 1335mtr x 15mu 350/700mm x 1335mtr x 15mu 300/600mm x 1070mtr x 19mu

9.4 10.5 12.0 10.5

PLPT Pouch Tape Dispenser

ive ffect cost-e e to e r o A m ernativ closed alt ts En men Docu wallets

Plastic dispenser for Documents Enclosed pouch tape and label protection tape.

50 s PT1 ense Disp uch Tape d Po an rately accu uickly q Code Description

Code Message

Size

PT150 Documents Enclosed

144mm x 66mtrs

6.65

Polythene Sheeting

PLPT

1.25

Pouch Tape Dispenser

Polythene Top Covers

to fit vers ut co izes c e r nt p pallet s chwrap enie t Conv popular with stre dust nd er a h e t r e istu tog Use high mo ection for prot

re oistu nd m r a wide a t s Du tion fo c f prote range o s tion a c li app

See Page 50 for polythene film dispensers

PFD-1 Shrink Film Roll Dispenser

4 metres (centre/multi folded)

Code

Size

PS002 65mu x 75mtrs PS003 80mu x 50mtrs PS004 200mu x 25mtrs

150 covers per roll

Colour MF MF MF

Black Clear Clear

17.0 15.6 16.0

2 metres (centre folded)

PS006 80mu x 100mtrs PS007 200mu x 50mtrs

Clear Clear

16.0 17.5

Code

See Page 50

Size

PTSH-1 900/1800 x 1800mm x 50mu Clear BKPTSH2 900/1800 x 1800mm x 50mu Black HSTSH1 900/1800 x 1800mm High Density x 24mu Clear

FILMS & POLYTHENE PRODUCTS

24.0 24.0 13.1

39

Heavy Duty Shrink Wrap Systems

Reliable technology for higher volume PVC and polyolefin shrink wrapping

Heat Shrink Chambers ®

Total Shrink Wrapping Solutions Optimax® Heat Shrink Chambers seal and shrink in one operation, and feature very low energy consumption and advanced electronic controls

SC238 HEAT SHRINK CHAMBER FEATURES: Power supply: Max power consumption: Effective power consumption: Sealing dimension: Max height of package: Machine dimensions: Max. dimension of film:

220/230/240V., 50/60HZ., 1-phase 3.2Kw 1.3-1.9Kw 280mm (D) x 380mm (L) 120mm 1020mm (L) x 620mm (W) x 550mm (H) 360mm x Ø250mm

All Shrink Chamber and L-Sealer prices include a 12 months parts or return to base warranty

SC346 HEAT SHRINK CHAMBER FEATURES: Power supply: Max power consumption: Effective power consumption: Sealing dimension: Max height of package: Machine dimensions: Max. dimension of film:

220/230/240V., 50/60HZ., 1-phase 3.2Kw 1.3-1.9Kw 320mm (D) x 460mm (L) 120mm 1120mm (L) x 660mm (W) x 550mm (H) 400mm x Ø250mm

in odel m g n rink -selli Best mber Sh ge a n h a C per r Wrap

SC455 HEAT SHRINK CHAMBER FEATURES: Power supply: Max power consumption: Effective power consumption: Sealing dimension: Max height of package: Machine dimensions: Max. dimension of film: SC455 model requires a 16A supply and connector (not included)

40

FILMS & POLYTHENE PRODUCTS

220/230/240V., 50/60HZ., 1-phase 16amp 3.77Kw 1.6-2.3Kw 420mm (D) x 550mm (L) 250mm 1320mm (L) x 820mm (W) x 645mm (H) 600mm x Ø250mm

®

®

Optimax high performance packaging machinery

Heat Shrink Chambers SC680 FEATURES: Power supply: Max power consumption: Effective power consumption: Sealing dimension: Max height of package: Machine dimensions: Max. dimension of film:

FILMS & POLYTHENE PRODUCTS

HEAT SHRINK CHAMBER 380/400/415V., 50/60HZ., 3-phase 5.3Kw 2.3-3.4Kw 620mm (D) x 800mm (L) 250mm 1575mm (L) x 1020mm (W) x 645mm (H) 800mm x Ø250mm

high and ase l u f r Powe city 3-ph capa model

Shrink Chamber Spare Part Products Code 297F-0074 297F-0075 705300250 705100250 705000250 705200250 702500161

Description Teflon Roll For Shrink Chamber 2mtr Teflon Roll For Shrink Chamber 10mtr Sealing Element For SC238 Sealing Element For SC345 Sealing Element For SC455 Sealing Element For SC680 Rubber Strip Short For SC238

Code 702500160 702400161 702400160 705000131 705000130 705200131 705200130

Description Rubber Strip Long For SC238 Rubber Strip Short For SC345 Rubber Strip Long For SC345 Rubber Strip Short For SC455 Rubber Strip Long For SC455 Rubber Strip Short For SC680 Rubber Strip Long For SC680

Combined Sealer/Shrink Tunnel k shrin r rate e Sepa l for fast e t n u n p u t gh throu

ST455 L-SEALER MACHINE FEATURES: Power supply: Max power consumption: Sealing dimension: Tunnel inlet dimension: Working plate height: Max packing height: Machine dimensions: Max. dimension of film: Machine weight:

400V., 50HZ., 3-phase 9Kw 400mm (D) x 550mm (L) 400mm (W) x 200mm (H) 900mm 150mm 2570mm (L) x 870mm (W) x 1600mm (H) 600mm x Ø300mm 400kg

The ST455 is an air assisted model that requires a compressed air supply. The air presure range is 3.5 to 4.5 (kg/cm2) Please contact our technical service centre for more information.

FILMS & POLYTHENE PRODUCTS

41

Heat Sealer Systems and Accessories designed to provide the complete sealing package

Heat Sealer & Shrink Film Systems Economical Portable I-Bar Sealers

IBAR450

IBAR800

KITIB450

KITIB800

> No warm-up time needed > Outlet Plug 240 volt > 450mm x 800mm / 7.5kg > Requires HAB1500 Hot Air Gun

> No warm-up time needed > Outlet Plug 240 volt > 800mm x 800mm / 7.5kg > Requires HAB1500 Hot Air Gun

Maintenance Kit

Maintenance Kit

1 x element wire, 2 x upper teflon 1 x lower teflon 1 x 10a fuse

1 x element wire, 2 x upper teflon 1 x lower teflon 1 x 10a fuse

L-Bar Heat Sealer

LBS300 > For 300mm PVC Shrink Film. > Requires Unrolling Device and HAB1500 Hot Air Gun

42

FILMS & POLYTHENE PRODUCTS

High quality, versatile shrink film systems and consumables

Heat Sealer & Shrink Film Systems PVC Shrink Film System PSFS400 FILMS & POLYTHENE PRODUCTS

System comprises > IS400RW Round Wire Sealer > HAB1500 Hot Air Blower > 450WB Unroller

RW400KIT

for ystemand s l a Ide -level e entry lume us o low v

Heat Sealer Repair Kit (Suitable for IS400RW > Includes 2 wires > lower teflon and 1 upper teflon

Code IS400RW HAB1500 450WB

PVC and Polyolefin Shrink Film on Page 30

4.10 4.90 6.20

Film Unrollers

HAB1500 Hot Air Gun

With integral separator bar

1600 watt

For PVC Shrink Film

Code HAB1500

HABSTD Hot Air Gun Stand Code

Size

300WB 450WB 600WB

300mm 450mm 600mm

Also suitable for use with Polythene Layflat Tubing

Code HABSTD

FILMS & POLYTHENE PRODUCTS

43

Our introductory heat sealer range offering good value and reliable performance

Pacseal Heat Sealers Pacseal Impulse Heat Sealers with and without cutter > Seals up to 2 x 150mu (600g) > Usage guide – 100-plus seals per shift

See page 29 for for Layflat Tubing

Code

Code

Size

IS200C IS300C IS400C IS500C IS200 IS300 IS400 IS500

200mm 300mm 400mm 500mm 200mm (without cutter) 300mm (without cutter) 400mm (without cutter) 500mm (without cutter)

3.80 5.00 6.15 8.10 2.90 4.40 5.55 6.00

PHS150 Portable Hand Held Heat Sealer for sealing polythene bags and tubing. For film up to 2 x 200mu (800g)

Hand Held Heat Sealers > 150mm wide

Size

Film Unrollers (with integral separator bar) 300mm 300WB 450mm 450WB 600mm 600WB Spare Parts kit for Impulse Heat Sealers - with blade 200mm IS2KIT 300mm IS3KIT 400mm IS4KIT 500mm IS5KIT

g ealin s a l for s Idea foil such r barrie ffee bags co

Spare Parts kit for Impulse Heat Sealers - without blade KIT200 200mm No Blade KIT300 300mm No Blade KIT400 400mm No Blade KIT500 500mm No Blade

Automatic Impulse Heat Sealer

ent nsist le, co pact unit b a l l ro m Cont in a co luded as c ng seali tpedal in rd a d n Foo a st

Automatic Heat Sealer for continuous sealing of polybags, with electronic timer and magnet. Sealing head designed to eliminate operator error, as the sealing head is held down by the electromagnet until the film has had sufficient time to seal and cool. The AMI-450 produces a heavy duty seal. Includes an electric foot pedal for manual operation. Seals up to 2 x 150mu (600g)

CCHS300 300mm wide heat sealer. Excellent for sealing plain and gussetted foil bags. Temp range: 30˚C - 200˚C Max seal thick: 2 x 0.25mm Seal width: 10mm Watts: 350W

CCHS600 600mm wide heat sealer. t and ghpu tion ra throu High s-free ope ives the hand nt heat g tures ra ta Cons er tempe ealing high ed for s gs. need ined ba foil-l

44

FILMS & POLYTHENE PRODUCTS

0.05 0.05 0.05 0.05

Part kit includes: 2 elements, 3 upper teflon, 1 lower teflon

1.00

Constant Heat Sealers

0.05 0.05 0.05 0.05

Part kit includes: 1 blade, 2 elements, 3 upper teflon, 1 lower teflon

0.90

PHS150C Portable Hand Held Heat Sealer with Crimp Seal for sealing cellophane, polyprop, barrier foil and other laminates

2.0 2.6 3.3

Layflat Tube Dispenser Code TLD40

Description Telescopic layflat tube dispenser

Code

Size

AMI-450 450mm AMI-600 600mm Code AMI-450KIT AMI-600KIT

Parts kit includes > 2 elements > 2 silicon pads, > 1 Teflon roll and 2 lower Teflon strips

21.0 29.0

Pro-Seal offers a high quality range of professional, innovative design heat sealers

Pro-Seal Desk Top Impulse Heat Sealers Useage guide 100-400 seals per shift

Pro-Seal Impulse Heat Sealers offer the packaging professional the next generation of heat sealer technology.

Code

Size

C220 C320 C420 C620 C820

220mm with cutter 320mm with cutter 420mm with cutter 620mm with cutter 820mm with cutter

3.50 4.00 4.50 5.00 8.50

Pro-Seal C-820 820mm impulse heat sealer with cutter

Accessories Code Size HA000670 HA000889 HA000903 HA000904 HA001334 HA001335 HA001336 HA001337

4.10 4.90 6.20 6.80 0.05 0.05 0.05 0.05

220mm work table and film holder 320mm work table and film holder 420mm work table and film holder 620mm work table and film holder 220 Spares Kit* 320 Spares Kit* 420 Spares Kit* 620 Spares Kit*

FILMS & POLYTHENE PRODUCTS

Ergonomically designed and simple to operate, the Pro-Seal range is perfect where fast, reliable heat sealing is required. Pro-Seal Impulse Heat Sealers are able to seal PE, PP, PA and PVC foil and thinner double-coated materials. Within the packaging industry, Pro-Seal is set to become the name synonymous with the very best in impulse heat sealing.

Pro-Seal easy to handle features include: > Adjustable sealing time for different films > Sealing is closed manually > Specially designed sealing wire tension unit for consistent 2.5mm seal > Integrated safety cutting knife > 1 piece aluminium extrusions for added strength and safety > No mechanical switches for optimum reliability > PVC 2 x 30mu

Accessories Code Size HA001338 HA001339 HA000427 HA000641

0.05 0.05 0.05 0.05

C-Type Cutting Knife (Complete Assembly) C-Type front Cap (Magnet) C-Type Silicon Rubber (Metre) C-Type Opening Spring (Assembly)

*Spares Kits Include: 1 x element wire, 1 x lower teflon & 1 x upper teflon

Inox stainless steel fittings Stainless Steel (INOX) Range ideal for the food industry Code

Size

CI220 CI320 CI420 CI620

220mm with cutter 320mm with cutter 420mm with cutter 620mm with cutter

Technical information

Accessories Code Size 3.50 4.00 4.50 5.00 C220 CI220

HA911 HA914 HA915 HA916

4.10 4.90 6.20 6.80

220mm work table and film holder 320mm work table and film holder 420mm work table and film holder 620mm work table and film holder

C320 CI320

220mm 320mm Seal length 2.5mm 2.5mm Seal width 200mm 300mm Max. film width 200mm 300mm Max. cutting length 230v 50/60Hz 230v 50/60Hz Voltage 135w 175w Consumption 450 x 100 x 175mm 550 x 100 x 175mm Dimension of machine 475 x 133 x 200mm 575 x 133 x 200mm Dimension of packed machine 3.5kg 4.0kg Weight of packed machine > Seals polythene up to 200mu (800g) > PP 2 x 80mu > PVC 2 x 30mu

C420 CI420

C620 CI620

420mm 2.5mm 400mm 400mm 230v 50/60Hz 220w 650 x 100 x 175mm 675 x 133 x 200mm 4.5kg

620mm 2.5mm 600mm 600mm 230v 50/60Hz 320w 850 x 100 x 175mm 875 x 133 x 200mm 5kg

se in for u and e l b a g Suit handlin food orrosive ts c en onm envir

Maximum Film Thickness PE polythene 200mu bag, total thickness 400mu PP polypropylene 80mu bag, total thickness 160mu PVC 30mu bag, total thickness 60mu

FILMS & POLYTHENE PRODUCTS

45

Ultimate heavy duty heat sealing technology and accessories from Opti-seal

Opti-seal Industrial Heat Sealing Machines The compact design of Opti-seal Sealers enables their convenient positioning within easy reach of a workstation. Optionally, they can be mounted on a stand featuring a film holder for easy, on-demand film dispensing and a foot pedal for hands-free operation. An additional work table and adjustable bag support takes the weight of the product during sealing to ensure a neat, intact seal and bag size consistency.

Opti-Seal Industrial Impulse Heat Sealers offer the ultimate in heat sealing technology. Unsurpassed Opti-Seal quality includes an integrated, magnetic sealing head with a 5 mm heavy duty seal. Opti-Seal machines offer simple yet versatile operation, with adjustable sealing and cooling times, and are suitable for sealing PE, PP, PA and PVC film as well as thinner, double-coated materials. When only the best will do, Opti-Seal is the No.1 choice.

h. widt seal res m m u ty 5 ad ens very y du e e Heav gnetic h ent seal Ma onsist e of g n c a e r ilable re, secu . Wid a time ories av s s e c ac

Advantages of Opti-Seal Machines

ag eal b Optis and foot e h t Add t, stand andling h or supp for easy ems l it peda f larger o

Optiseal Sealer shown with optional stand

> Easy use and operation > Wide range of applications > Automatic impulse sealing operated by hand or foot pedal > Integrated sealing magnet > Separate, electronically adjustable sealing and cooling times > Gas spring controlled sealing bar > Integrated sealing wire tensioner > Adjustable work table > Ideal for creating and sealing pouches and bags > Integrated safety cutting knife > 5mm sealing wire

Size

S420 S620 S820 S1020

420mm with cutter 620mm with cutter 820mm with cutter 1020mm with cutter

Accessories Code

Description

HG1374 HG1288 HG1353 HG1289 HG001354 HG001290 HG1375 HG1291 HA001228 HA001229 KA001065 HA001383 HA000414 FPED HA002025 HA001323

420mm work table and bag support 420mm stand, foot pedal & film holder 620mm work table and bag support 620mm stand, foot pedal & film holder 820mm long work table and bag support 820mm stand, foot pedal & film holder 1020mm work table and bag support 1020mm stand, foot pedal & film holder 5 metres of upper teflon 5 metres of lower teflon 5 metres of 5mm sealing wire S-Type Cutting Knife (Complete) C/S-Type Cutting Blade Flexi Foot Pedal S-Type Sealing Head Return Spring S-Type Silicon Rubber (Metre)

46

FILMS & POLYTHENE PRODUCTS

12 months return to base warranty as standard

Useage guide 200-400 plus seals per shift

Maximum Film Thickness

Machines Code

Accessories: > Working table with bag holder > Stand, foot pedal and film holder > Long table with long bag holder > Extended foot pedal > Aluminium support arm > Date stamping unit > Perforating unit

30.0 36.0 42.0 48.0

PE polythene PP Polypropylene PVC Laminates, foil etc.

250 micron bag, total thickness 500 microns 200 micron bag, total thickness 400 microns 100 micron bag, total thickness 200 microns 150 micron bag, total thickness 300 microns

Technical information

Code Seal length Seal width Max. film width Max. cutting length Voltage* Consumption Dims. of machine & frame Weight of packed machine

S420 & SI420 420mm 5mm 400mm 420mm 230v 50/60Hz 450w 620 x 650 x 1100mm 30kg

S620 & SI620 620mm 5mm 600mm 620mm 230v 50/60Hz 350w 820 x 650 x 1100mm 36kg

Code Seal length Seal width Max. film width Max. cutting length Voltage* Consumption Dims. of machine & frame Weight of packed machine

S820 820mm 5mm 800mm 820mm 230v 50/60Hz 850w 1020 x 650 x 1100mm 42kg

S1020 1020mm 2.5mm 1000mm 1020mm 230v 50/60Hz 950w 1220 x 100 x 175mm 48kg

Innovative accessories that increase the efficiency of high volume sealing

OptiVac Vacuum Heat Sealers

Vacuum Heat Sealers cycle rking r wo bag size e t s n h fa Muc regulatio tprint n No mall foo sumptio n l S o a c e s y nerg ity 8mm e w Lo qual High

12 months return to base warranty as standard

OptiVac vacuum heat sealers are ideal for the food, electronics, pharmaceutical and healthcare industries, offering reliable and consistent pre-seal evacuation, gas flushing and heat sealing performance.

Please note: OptiVac ‘VT-HEAD’ and OptiVac ‘VT’ Straight Sealer bars are sold separately

OptiVac Straight Sealing Bar Technical information

Standard Specifications

OptiVac Advantages

> Foot pedal activation of operation cycle > Automatic or manual operation > Bi-Active upper and lower sealing > Ejector vacuum pump > Vacuum filter > Water discharge system > Emergency stop > 8mm sealing width

> Sensor-activated vacuum control with variable vacuum (kPa) and time (0.1 second) incremental adjustment > First and second vacuum pressures, times and gas flushing times all set independently > 5.7 inch colour LCD touch panel control and operation > User-friendly multi-language menu > Safety-conscious design including electrical circuit protection > Two digital counter functions > Pneumatic sealing action for a firm seal and reduced electricity consumption > All models fitted with SMPS technologyderived intelligent power circuits

Sealable films > PET/Paper/PE laminations > PE/Aluminium/PE laminations > Any other thermo-sealable laminations

FPED Flexible Foot Pedal Connect this to the Opti-seal Bench Mounted Magnetic Sealer for “hands-free” operation. The Sealer must overhang the front of the bench by 40 mm and be screwed down.

Packaging Chute The Opti-seal Packaging Chute uses layflat tubing to create variably sized sealed bags on demand for batch packaging of any small components.

V-type and I-type sealers are equiped with the same sealing bars, so you can choose any type of sealing machine and than add the sealing bar to it.

Code Seal length Seal width Max. bag width Voltage Consumption Air Dimensions Weight

VT420 420mm 8mm 400mm 230v 50/60Hz 1800w max. 8bar 560 x 550 x 260mm 36kg

VT620 620mm 8mm 600mm 230v 50/60Hz 2100w max. 8bar 7600 x 550 x 260mm 40kg

Code Seal length Seal width Max. bag width Voltage Consumption Air Dimensions Weight

VT820 820mm 8mm 800mm 230v 50/60Hz 2300w max. 8bar 960 x 550 x 260mm 44kg

VT1020 1020mm 8mm 1000mm 230v 50/60Hz 2500w max. 8bar 1160 x 550 x 260mm 48kg

VT1320 1320mm 8mm 1000mm 230v 50/60Hz 2500w max. 8bar 1160 x 550 x 260mm 48kg

en etwe fer b hs/types t trans Easy t film wid esign ren ed diffe ench-sid vailable B e sa at th imise max g space n in pack orkstatio w

PPEHMS Mobile Heat Sealer Station The Opti-seal mobile heat sealer station has been developed for ‘pick/pack’ despatch of random-sized packages, creating mailing bags on demand, to any length. Designed to accommodate an Opti-seal S620 Heat Sealer, the station incorporates two separate mandrels for layflat tubing up to 24” (610 mm) wide. Fitted with castors for full manoeuvrability, the station positions the S620 Heat Sealer at the optimum height for it to be positioned alongside a work surface for efficient and ergonomic operation (see inset picture). *Heat Sealer not included in price – see page 36

FILMS & POLYTHENE PRODUCTS

47

FILMS & POLYTHENE PRODUCTS

OptiVac

Flexible Protective Sleeving and specialised Anti-Static Polythene Packaging

Protective Sleeving & Anti-Static Packaging Protective Sleeving provides a practical, efficient and cost-effective solution to the problems of surface damage to components during manufacture, storage and transit. Available in a range of colour coded sizes, the mesh is flexible enough to mould around irregularly-shaped items, protecting them from knocks and scratches. Unlike traditional materials such as wax paper, it can be used again and again. Manufactured from low density polyethylene in a tubular form in diameters ranging from 5mm to 300mm, Protective Sleeving is resistant to acids and solvents and is unaffected by oils and greases, making it ideal for protecting machined parts in an engineering environment. Other applications include bottle sleeving and protection of damage-prone items such as ceramics, glass, window furniture and furniture legs.

Protective Sleeving Jumbo 200 metre rolls

tion otec ate r p e egr abl Reus n’t disint ater w s r e Do h oils o stance wit ear resi t High

Code

Colour

Min ø

Max ø

Length

Box Quantity

TP5 TP10 TP20 TP50 TP75 TP100 TP150

Clear Violet Blue Yellow Brown Red Orange

7mm 10mm 25mm 35mm 50mm 50mm 75mm

15mm 20mm 50mm 70mm 75mm 100mm 150mm

200mtr 200mtr 200mtr 200mtr 200mtr 200mtr 50mtr

4 4 4 2 2 2 2

0.8 0.9 1.4 2.2 2.4 2.7 5.0

Anti-Static Packaging Specialist Application Packaging Solutions Anti-Static Dissipative Packaging This form of packaging is amine free and manufactured in transparent pink. Its flexibility and easy handling make the product ideal for nonsensitive components used in static controlled environments.

Metalised Static Shielding Bags

Anti-Static Bubble Pouches

This product is manufactured from metallic polyester, laminated to antistatic polyethylene. This provides true shielding to static sensitive devices by the “Faraday Cage” principle with its inner antistatic layer preventing static charge generation.

With 30mm self adhesive lip.

Grip Seal Bags Printed ESD, warning symbol

Code

Size

MSGT68 6” x 8” MSGT810 8” x 10”

Qty/box 500 500

Open Ended Bags

MSPB46 4” x 6” MSPB68 6” x 8” MSPB810 8” x 10”

Pink Anti Static Grip Seal Bags (not printed)

Code

Size

Qty/box

AS6 AS9 AS11 AS12

4” x 5.5” x 200g 5” x 7.5” x 200g 6” x 9” x 200g 8” x 11” x 200g

1000 1000 1000 1000

1.90 3.60 4.60 6.40

Open Ended Anti Static Polythene Bags Printed ESD, warning symbol

Code

Size

Qty/box

6” x 8” x 400g 1000 PB68-AS PB810-AS 8” x 10” x 400g 1000 PB1012-AS 10” x 12” x 400g 1000

48

FILMS & POLYTHENE PRODUCTS

1000 500 500

Black Volume Conductive Bags Ideal for the transportation of Static Sensitive devices, providing “Faraday Cage” protection. This versatile product is unaffected by humidity with stable properties. Surface resistivity less than 105 Ω2 (EN 100 015/1). Grip Seal Bags

5.80 10.0 15.2

Printed ESD, warning symbol

Code

Size

Qty/box

BCPB68 6” x 8” x 300g 1000 BCPB810 8” x 10” x 300g 1000

6.20 8.40

Code

Size

Qty/ctn

ASBP1 ASBP2 ASBP3 ASBP4 ASBP5 ASBP6 ASBP7

100 x 135mm 130 x 185mm 180 x 235mm 230 x 285mm 280 x 360mm 305 x 435mm 380 x 435mm

750 500 300 300 150 150 100

2.80 2.90 2.50 3.70 3.30 3.80 3.40

The very best polythene gas shrink gun systems from the market leader

FILMS & POLYTHENE PRODUCTS

Polythene Gas Shrink Systems

Ripack 2200 Propane Gas Shrink System > > > >

weight of gun only 1.2kgs

More power - 68kW Up to 20% more productivity Instantaneous - smooth ignition (no more two stage ignition) New design incorporates the ignition system inside the gun for longer life

5.0kg shipping weight per kit 68 kilowatt

> Fast

nted Pate ld Co le Nozz

The large heating nozzle allows heat to be applied over a large area combined with a very short shrinking time to reduce operating costs. The adjustable regulator allows power to be controllable for a wide range of size applications.

> Reliable

No risk of burns, no need for protection, the Ripack nozzle remains cool during and after operation.

The double safety regulator protects the appliance against internal overheating. No distortion therefore longer lasting - maintenance costs are reduced

> Safe

> Ergonomic

The automatic valve on the unique regulator will shut off in the event of the hose being cut through or damaged. The R2200 also features a safety guard and dead man’s handle.

Light and easy to handle, fatigue free and fast working, the rotating nozzle and swivel gas connection prevent the hose twisting and enhance operator performance

> Cold Nozzle®

weight of gun only 1.2kgs 5.0kg shipping weight per kit

for andle rip h eration g t f e ic so able op t nom in th Ergo e comfor storage asy r r e e o d it m st an e ign Spar dle for fa ment han replace

Ripack 3000 Propane Gas Shrink System The New Ripack 3000 Propane Gas Shrink System offers all the features of the 2200 model plus... > Increased power improves productivity by an additional 15% > More comfort from improved handle grip > Large suspension ring for attaching the gun to a retractable tool balance > A spare igniter is now stored in the handle and can be replaced without tools in less than a minute > Carrying case/footboard elevating the operator by 27cm

The R3000-10 is supplied in a carrying case that also serves as a stable platform, capable of elevating an operator of 120kg by 27cm

15% faster due to its higher heat power FILMS & POLYTHENE PRODUCTS

49

Cost effective gas shrink systems and unique gas shrink accessories

Polythene Gas Shrink Systems & Accessories GSG100 Gas Shrink Gun System > Low cost > Complete system including 8 mtr hose & safety regulator valve > Uses propane gas > Weight of shrink gun approx 1kg

Improved design. Stronger, smaller nozzle, more powerful and comfortable to handle. More Economical

32 kilowatt

2.9kg

PFD-1 Shrink Film Roll Dispenser

PCT Gas Cylinder Trolley

Film Dispenser for polythene shrink film/covers on a roll, with lockable castors. Expands to up to 2mtr wide roll capacity. Supplied with one spindle as standard (additional spindles available on request). Dimensions: Height 870mm x Width 2000mm x Depth 660mm gas your ight, e r o t e tw ly s Safe this ligh nder on ile cyli n u g t versa trolley

es metr to 2 le b a e end ll siz p e ext fit ro Fram width to penses u is d d ducts s an Hold 3 roll pro usly o to e ltan simu 16.6kg

Product Code: PF-SPINDLE Additional Telescopic Spindles

8.3kg

Spare Parts for Shrink Guns For spare parts not listed please phone for price Ripack 2000/2200/3000

Part No.

Description

134025 250023 148043 131003 236022 232061 243044 243056 233258 233385 248113 131072

Regulator Hose Swivel Connector Piezo Igniter Ignition Wire (2000) Spark Plug (2200) Neck Casing (2200*) Neck Casing (2200**) Ignition Wire (2200*) Ignition Wire (2200**) Gas Tap Piezo Igniter - only for use with extensions

50

FILMS & POLYTHENE PRODUCTS

Compatible With

2000 l l l l l l

2200 l l l l l l l l l l l

GSG100

3000 l l l l l l

Part No.

Description

GSG/3 GSG/5 GSG/9A GSG/10 GSG/14 GSG/15 GSG/2

Gas Tap Spark Generator Electrode - Spark Plug Flame Cowl Regulator Hose 8 mtr Trigger

*Serial number 197868 or earlier **Serial number 197869 or later

Three types of quality shrink films suitable for a wide range of uses and applications

Polythene Shrink Film Polythene Shrink Film in Centre Fold, Gusset Tubing and Bag on Roll configurations. Select the right film for the right application...

Cut to required length

Ideal for awkward shaped products, such as trolleys, trucks, fitments and machinery.

For awkward shaped items...use Centre Fold

Centrefold Shrink Film

For loads of varying height...use Gusset Shrink Tubing

Cut to required length

FILMS & POLYTHENE PRODUCTS

All available from stock for next day delivery

Cut tubing to length and seal the top by applying the shrink gun along the edge and when it starts to melt seal by running a metal spatula across the film. GS1012 is ideal for loads on pallets measuring 1000 x 1200mm.

Code

Description & Size

CS1225

Shrink Centre Fold Polythene Sheeting 1250mm/2500 mm x 125 micron x 85m/roll

25.0

PS004

Shrink Multi Fold Polythene Sheeting 4000mm x 200 micron x 25m/roll

16.0

Pallet covers on a continuous roll, ideal for variable pallet heights. Shrink Gusset Polythene Tubing

Code

Description & Size

GS1012

Shrink, Gusset Polythene Layflat Tubing 1250mm/2250mm x 125 micron x 50m/roll To suit load size 1000mm x 1200mm

27.0

GS1223

Shrink, Gusset Polythene Layflat Tubing 1200mm/2300mm x 200 micron x 30m/roll

29.4

For loads of approx 1200mm height...use Ready Made Shrink Bags on a Roll Perforated on the roll for convenience Perforated on the roll

Polythene Shrink Bags

SB1280 Load Size: Load Height: Thickness: Covers/Roll:

1200 x 800mm 1200mm 125mu (500 gauge) 30

(Pallet cover size 1300/2150mm x 1850mm)

1200mm

Ready made covers provide the quick and professional solution to high presentation shrink wrapping.

Euro Pallet

GKN Pallet 1000 x 1200mm

1200 x 1200mm Pallet

To facilitate dispensing and prevent damage to shrink film, use our PFD/1 Dispenser.

SB1210 Load Size: Load Height: Thickness: Covers/Roll:

1200 x 1000mm 1200mm 125mu (500 gauge) 30

(Pallet cover size 1300/2350mm x 1950mm)

SB1212 Load Size: Load Height: Thickness: Covers/Roll:

1200 x 1200mm 1200mm 125mu (500 gauge) 25

30kg

(Pallet cover size 1300/2550mm x 2050mm)

FILMS & POLYTHENE PRODUCTS

51

Huge stocks of Stretch Film in a wide variety of sizes available for immediate despatch

Stretch Film & Stretch Film Dispensers Pre-Stretched Film

Standard Stretch Film

Weight Per Carton Hand Film

Code

Size

Qty

PSH468 400mm x 600mtrs x 8mu 6 rolls per carton Extended core 40mm id 240 rolls/pallet x 530mm length

For Stretch Film Dispensers see page 53

13.14

Cast Film

Code

Size

Core

CCE417 CCS417 CCE420 CCS420 CCS520

400 x 300mtr x 17mu 400 x 300mtr x 17mu 400 x 300mtr x 20mu 400 x 300mtr x 20mu 500 x 300mtr x 20mu

38mm Ext Core 38mm Std Core 38mm Ext Core 38mm Std Core 50mm Std Core

Weight Per Carton

12.1 12.1 13.4 13.1 16.9

Machine Film

Code

Size

Qty

PSM438 440mm x 2800mtrs x 8mu 60 rolls/pallet

Blown Film

BCE417 400 x 300mtr x 17mu CBE417 Blue Tint 400 x 300mtr x 17mu BCE420 400 x 300mtr x 20mu BCS520 500 x 300mtr x 20mu BCS5234 500 x 200mtr x 34mu

38mm Ext Core 38mm Ext Core 38mm Ext Core 50mm Std Core 50mm Std Core

11.9 11.9 14.1 17.0 22.7

Black Opaque Stretch Film

BBKS525 BBKS4317

500 x 250mtr x 25mu 50mm Std Core 400 x 300mtr x 17mu 38mm Ext core

Power Machine Stretch Film Cast 300%

MSF520 MSF523

Weight Per Roll

22.7 12.1

Weight Per Roll

500 x 1700mtrs x 20mu 500 x 1550mtrs x 23mu

SR80 Standard Dispenser > Standard Dispenser for 400mm/500mm stretchwrap on 38/50/75mm Core > 6 dispensers per case

8mu PreStretched Film Due to the film being pre-stretched, the film does not ‘neckdown’.8 micron pre-stretched film performs more efficiently than 12-20 micron standard film.

17mu Standard Film

Saves fatigue as the operator simply walks around the pallet, holding the film taut. As most of the stretch has been taken out of the film, the load will remain stable during transit.

> Heavy Duty Telescopic Dispensers for Stretchwrap on 38/50/75mm core. > Ideal for 400mm or 500mm. > 6 dispensers per case

500mm width film suitable only with 50mm and 75mm core

1.30kg

HSAV38/HSAV50

> DPD38 Plastic Hand Grip Dispenser for stretchwrap on a 38mm core > DPD50 Plastic Hand Grip Dispenser for stretchwrap on a 50mm core > 32 dispensers per case

> HSAV38 End Bungs Hand saver 38mm lightweight stretchwrap end bungs > HSAV50 End Bungs Hand saver 50mm lightweight stretchwrap end bungs > 75 dispensers per case

FILMS & POLYTHENE PRODUCTS

TMW Heavy Duty Dispenser

DPD38/DPD50 Dispenser

52

Up to 50% less film used results in up to a 50% cost saving and packaging waste reduction.

16.79 16.79

1.45kg

0.20kg

✔ 10.97

0.25kg

ghtnd li m ost a fil Low-c t stretch h weig ispensing d n io solut

Choose from our range of Stretch Film Dispensers, suitable for all manual stretch film applications

Stretch Film Dispensers BWR4050 Dispenser Bow Wrapper Dispenser Suitable for 400mm & 500mm stretchfilm Suitable for 38mm & 50mm core 4 dispensers per case

3.85kg

HW38 Handy Wrap Dispenser > Handy Wrap Dispenser for Handy Wrap Film & stretch wrap on 38mm core > 12 per box, 144 per outer

> Stretchsaver Dispenser > Operator friendly, ergonomic manual pallet stretchwrapper > Automatic tensioning system > Economical long-length roll > Easy roll change - quarter turn locking

es n giv ositio tension p le Hand alanced reduces b d more film an rist w ss o r c and a k c a b strain

FILMS & POLYTHENE PRODUCTS

> > > >

SSX12 Stretchsaver Dispenser

5kg

HWSC Handy Wrap Dispenser > Solid core hand wrap dispenser for 38mm core > 12 per box

HWF6K Handy Wrap Kit > 1 x Dispenser > 6 x rolls of film

3.50kg 0.10kg

0.10kg

HWFKI Handy Wrap Starter Kit

Handy Wrap Film > 36 rolls per case

> 2 x Dispensers > 10 x rolls in convenient carry box 3.50kg

Code

Size

HWF100 HWF17

100mm x 150mtr x 15mu. core size 140 x 38mm (extended) 100mm x 150mtr x 17mu. core size 140 x 38mm (extended) 40 rolls/carton 100mm x 150mtr x 17mu Black Handy Wrap on 38mm extended core

PS1116B

7.80 11.75 7.80

Maximise your pallet stretch wrapping efficiency with the new Optimax® Pallet Wrapping Turntables Optimax®

Optimax®

PSW001

PSW002

semi-auto pallet wrapping turntable

semi-auto powered pre-stretch pallet wrapping turntable

®

®

Features include: Specifications > 1650mm turntable with 2000mm Max Wrapping Height: 2000m wrapping height Max Turntable Speed: 10rpm > spring break stretch Max Loading Weight: 1200kg > home position: the turntable Turntable Diameter: 1500mm Power Supply: 13amp 1ph always stops at the same position Power Consumption: 0.8Kw > pallet height photo sensor Machine Dims: 1650 x 2550 > choose between 3 bottom wraps x 2358 and 2 top wraps or 2 bottom wraps w x d x h (mm) and 1 top wrap > adjustable tension > soft start and stop > machine can be paused during cycle > magnetic brake holds turntable still during loading and unloading > audible warning when running a cycle > safety switch to prevent foot pitch PSW001

Features include: Specifications > 300% power stretch. 1 metre of film Max Wrapping Height: 2000m pre-stretched to 4 metres Max Turntable Speed: 12rpm > 1650mm turntable with 2000mm Max Loading Weight: 1650kg wrapping height Turntable Diameter: 1500mm Power Supply: 13amp 1ph > home position: the turntable always Power Consumption: 1.2Kw stops at the same position Machine Dims: 1650 x 2550 > pallet height photo sensor w x d x h (mm) x 2358 > adjustable tension, turntable and carriage speed > soft start & stop with cycle pause function > choice of automatic or manual modes > 180 degree rotating control box > trouble shooting information show on screen > safety switch to prevent foot pinch > advanced soft wrapping > manual reinforced strapping feature > automatic film pin puncture > one way idel roller (Designed to allow film tail to stay outside of carriage)

PSW002

FILMS & POLYTHENE PRODUCTS

53

papers & protective packaging > > > > > > > >

54

Packaging Papers Jiffy Bags & Mailing Envelopes Trans Monitor Transit Labels Trans Label Parcel Labels Trans Haz Hazard Warning Labels Pillopax Air-Pillow Systems EcoPax Cushion Pack Systems Plastic Pallets

PAPERS & PROTECTIVE PACKAGING

55 56 57 58 59 60 62 64

GENERIC PAPERS_SOUTHGATE/ADPAC 48 3-49 12/08/2015 13:29 Page 2

A wide range of speciality papers suitable both for packaging and industrial applications

Packaging Papers VCI-100 Rust Inhibitor Paper

Waxed Kraft Paper

A comprehensive range of anticorrosion products are now available

Code

Size

VCI-100

1000mm x 200mtr x 50gsm V.C.I.

Code 11.0

Kraft Union Paper

Size

WKP40 900mm x 100mtr x 55Gsm Waxed Kraft

MG Pure Ribbed Kraft Paper

Ream = 480-500 sheets approx. Rolls 70gsm = 285mtrs. Rolls 88gsm = 225mtrs.

Code

Size

KUP6 KUP9 KUP12 KUP18

600mm x 120gsm x 100mtr 900mm x 120gsm x 100mtr 1200mm x 120gsm x 100mtr 1800mm x 120gsm x 100mtr

7.4 11.2 14.9 22.3

Reams

PKP01

700mm x 1150mm x 70gsm Pure Kraft

18gsm

450mm x 700mm MG Bleached Tissue 500mm x 750mm MG Bleached Tissue 500mm x 750mm MG Acid-Free Tissue

900mm x 1150mm x 70gsm Pure Kraft

18.1

(packed in 1/2 reams)

PKP03 PKP04 PKP05 PKP06 PKP07 PKP08 PKP09

BTP47 BTP57 AFT57

15.5

(packed in 1/2 reams)

Tissue Paper

Size

Paper Roll Dispensers See Page 96

Code

PKP02

Code

11.0

2.9 3.55 3.4

Rolls 450mm x 70gsm Pure Kraft 500mm x 70gsm Pure Kraft 600mm x 70gsm Pure Kraft 750mm x 70gsm Pure Kraft 900mm x 70gsm Pure Kraft 900mm x 88gsm Pure Kraft 1200mm x 70gsm Pure Kraft

8.25 9.15 11.0 13.7 16.5 16.5 22.0

MF Imitation Kraft Paper

News Off Cuts Ream = 480-500 sheets approx. Rolls = 200mtrs

Paper Roll Dispensers See Page 96

Code

Reams

IKP02

900mm x 1150mm x 90gsm Imitation Kraft

21.05

(packed in 1/2 reams)

Code

Size

NOC57

500mm x 750mm

12.5 Kilos/Pkt 80 Pkts (1 tonne)

12.5

IKP03 IKP04 IKP05 IKP06

Rolls 600mm x 90gsm Imitation Kraft 750mm x 90gsm Imitation Kraft 900mm x 90gsm Imitation Kraft 1150mm x 90gsm Imitation Kraft

PAPERS & PROTECTIVE PACKAGING

10.83 13.54 16.25 20.76

55

PAPERS & PROTECTIVE PACKAGING

Volatile Corrosion Inhibitor

Protective mailing solutions including a wide range of Jiffy Padded, Mailmiser and Airkraft bags

Protective Mailing Products Jiffy Padded Bags

Mailmiser Bags

The original protective postal bag

Premium white bubble lined postal bag

Code

Internal Size

Bags/Case

Code

PB00 PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8

107 x 235 132 x 235 164 x 285 196 x 285 196 x 350 221 x 350 247 x 387 298 x 464 336 x 489 437 x 665

200 200 100 100 100 100 100 50 50 50

8.1 9.5 7.2 8.6 10.1 10.7 12.9 9.2 11.1 20.3

Internal Size

MM000W 90 x 145 MM00W 115 x 195 MM0W 140 x 195 MM1W 170 x 245 MM2W 205 x 245 MM3W 205 x 320 MM4W 230 x 320 MM5W 260 x 345 MM6W 290 x 445 MM7W 340 x 445

Bags/Case 150 100 100 100 100 50 50 50 50 50

1.2 1.3 1.4 2.0 2.3 1.6 1.7 2.0 2.7 3.1

Jiffylite Airkraft Bags

Bubble Pouches

Superlight white bubble lined postal bag

With self adhesive flap

Code

Internal Size

Bags/Case

JL000 JL00 JL0 JL1 JL2 JL3 JL4 JL5 JL6 JL7

90 x 145 115 x 195 140 x 195 170 x 245 205 x 245 205 x 320 230 x 320 260 x 345 290 x 445 340 x 445

150 100 100 100 100 50 50 50 50 50

56

PAPERS & PROTECTIVE PACKAGING

1.2 1.2 1.4 1.9 2.1 1.4 1.5 1.8 2.5 2.9

Code

Size

Qty/Carton

S/S

BP1 BP2 BP3 BP4 BP5 BP6 BP7

100 x 135 130 x 185 180 x 235 230 x 285 280 x 360 305 x 435 380 x 435

750 500 300 300 150 150 100

30 30 30 30 30 30 30

2.8 2.9 2.5 3.7 3.3 3.8 3.4

Essential mailing, packaging and closure consumables

Protective Mailing Products Bubble Box

Code

Size (inches)

Qty/Pack

Code

Size

PMS1728

13/17 x 28

100/pack

SBDP300

300mm x 33mtr

PAPERS & PROTECTIVE PACKAGING

3 Ply Paper Mailing Sacks

Polythene Mailing Envelopes

Co-extruded white opaque outer/black inner burst proof polythene

Code

Size

Thickness

Material

Qty/Box

CPMA4 CXMA3

225mm x 315mm 320mm x 475mm

+ 35mm + 50mm

+ Self Adhesive

37 Micron 55 Micron

Clear Polythene Co-extruded

1,000/per box 1,000/per box

4.45 16.5

GPM67

600mm x 700mm

+ 40mm

55 Micron

Grey Polythene

250/per box

9.8

Green PVC Coated Sack Ties

Woven Polypropylene Sacks

Wire 1.1mm (17 gauge in PVC coating)

Strong, tear resistant sacks ideal for heavy, sharp fabricated products and engineering parts

Code

Size

ST6-C ST8-C ST9-C ST10-C ST12-C ST14-C STT

150mm PVC Coated 6” 200mm PVC Coated 8” 225mm PVC Coated 9” 250mm PVC Coated 10” 300mm PVC Coated 12” 350mm PVC Coated 14" Sack Tying Tool

2.25 2.60 2.90 3.10 3.60 4.20 0.40

Code

Size

WSP1520 WSP1824 WSP1932

38 x 55cm 100/pack 45 x 60cm 100/pack 50 x 80cm 100/pack

1.95 2.60 3.5

Transit Monitors are now part of the new Xtegra® range of security optimised packaging products. Please go to page 12 for more details.

PAPERS & PROTECTIVE PACKAGING

57

High quality self adhesive information labels and label dispensers

Parcel Labels & Dispensers Parcel Labels

All the Label Dispensers on this page can accommodate rolls up to 150mm outside diameter.

Price per Roll

Qty/Roll

Self Adhesive Parcel Labels Every Packing Department needs them

Code

Size

Description

SG45GFR

45x60

500

SG80AS

80x35

1,000

SG89FR

89x32

1,000

0.5

SG89GL

1,000

0.5

SG89UR

1,000

0.5

SG89SO

1,000

0.5

SG89HA

1,000

0.5

SG89DO

1,000

0.5

SG89DN

1,000

0.5

SG148FR

148x50

500

0.7

SG148GL

500

0.7

SG148HA

500

0.7

SG148DO

500

0.7

SG148NS

148x50

500

0.7

SG148HV

148x50

500

0.7

SG108FR

108x79

500

0.8

SG108HA

500

0.8

SG108TH

500

0.8

> Save time and money with these multi-instruction labels

SG108NS

500

0.8

> 102mm x 102mm

SG108LI

500

0.8

COM-LB1 Combination Shipping Labels 500 labels/roll. Price per Roll

PD611T

PD625T

Pacplus Bench Type Label Dispenser

Pacplus Bench Type Label Dispenser

160mm roll width label dispenser. Max roll diameter 210mm

250mm roll width label dispenser. Max roll diameter 210mm

1.2Kg

58

PAPERS & PROTECTIVE PACKAGING

0.9Kg

3.5Kg

Ask about our full range of Hazard Warning Labels

Warning Labels, Dispensers & Silica Gel Other hazard warning labels available on request

Hazard Warning Labels

PAPERS & PROTECTIVE PACKAGING

1 AZ :H uc tR ef

P La rodu be ct lS R ize ef: : 1 HA 25 Z x 200 11 0 0m m

81 AZ :H Pr od uc tR ef

:H Pr od uc tR ef

0.35kg

0.5kg

Pr od 0

Pr od 0 31 AZ

AZ :H uc tR ef Pr od

23

0 AZ uc tR ef

:H uc tR ef Pr od 41

0 91 AZ :H uc tR ef Pr od

0.35kg

0.45kg

:H

AZ

0.5kg

1

Pr od

uc tR ef

:H

AZ

0.5kg

23

0 22

21

1

Manufactured from self adhesive vinyl. 100mm x 100mm labels on rolls of 250.

0.45kg

0.35kg

0.7kg

Label size 100 x 100mm

White Plastic Tags

Paper and Paper Faced Tags & Labels Code

Code WPT45 WPT55 WPT70

Size 100 x 45mm 110 x 55mm 120 x 70mm

Description 250Mu White Plastic Tags Rounded Corner 250Mu White Plastic Tags Rounded Corner 250Mu White Plastic Tags Rounded Corner

Size

Wires

Qty/Pack

White card tags with reinforced eyelet 1,000 C/W 10” Wires WPL3 70mm x 35mm 1,000 C/W 10” Wires WPL4 82mm x 41mm WPL5 120mm x 60mm C/W 10” Wires 1,000 C/W 10” Strings 1,000 STCR4 82mm x 41mm Paper faced metal labels with strapping slots either side 250 WLM6 115mm x 60mm

0.85 1.2 2.25 1.1 10.2

Silica Gel Sachets

It is recommended you use 5 grams of silica gel per cubic foot, making sure your package is airtight.

Removes humidity in sealed packages. Prevents corrosion, condensation, rusting and fungal growth. Ideal for: Electronics, Precision Equipment, Leathergoods, Pharmaceutics, Optics etc..

Code

Sachet Weight (g)

Qty per Packet

Size per Packet (w x l)

SGS1 SGS5 SGS10 SGS25 SGS50 SGS100 SGS250 SGS500

1 5 10 25 50 100 250 500

500 250 500 500 250 200 100 50

18 x 33mm 37 x 52mm 36 x 74mm 47 x 122mm 86 x 127mm 71 x 158mm 113 x 181mm 108 x 253mm

0.5 1.25 5.0 12.5 12.5 20.0 25.0 25.0

PAPERS & PROTECTIVE PACKAGING

59

New generation air pillow system provides a host of advantages over traditional loosefill

Pillopax Air Cushion System ®

VMAX3 Simplicity in Air Pillow Packaging

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

The new Pillopax VMAX3 uses our unique high performance films as well as our general purpose Pillopax film.

Technical Specifications Dimensions: Weight: Speed: Film Sizes:

320 x 400 x 360mm 13kg 15 metres/min 200mm x 200mm & 200mm x 100mm

UPGRADE TO 12 MONTH ON-SITE PARTS & LABOUR WARRANTY FOR JUST

£320.00* INSTALLATION & STAFF TRAINING FOR JUST

£248.00* SEE BELOW FOR MORE DETAILS

New Technology, Improved Functionality Features and benefits include: > Portable, compact, rugged design > Only weighs 13 kilos > Very simple and easy to use controls

> Suitable for 200 x 200mm and 200 x 100mm Pillopax film > 15 metres per minute > Reliable, consistent pillow throughput

13Kg

All Systems Benefit from:

1

Reduced storage area required.

2

User-Friendly. Easy recycling and disposal. Ultimate product presentation.

3

Static protection of your packaged goods - unlike loosefill that can ‘settle’ allowing goods to migrate during transit.

Full range of service parts including teflon belts and cutting blades available. Please contact sales for details.

60

PAPERS & PROTECTIVE PACKAGING

The Four P’s of Packaging:

Pillopax Protective Pillow Packaging Pillopax Air Cushion System

Code

Pillow Size

Machine Use

PPF100HP High Performance Pillopax Film PPF200HP High Performance Pillopax Film PPF200-650HP High Performance Pillopax Film

200 x 100mm 500mtr/roll 200 x 200mm 500mtr/roll 200 x 200mm 650mtr/roll

VMAX3 VMAX3 VMAX3

Please Note: HP Film is only recommended for use with the VMAX3 & PX2000 Pillopax Machine

6.15 6.10

Pillopax Film Prices for 400mm wide film on request - minimum quantities apply

Code

Pillow Size

Machine Use

PPF100 PPF150 PPF200 PPF300

200 x 100mm 35mu 500mtr/roll 200 x 150mm 35mu 500mtr/roll 200 x 200mm 35mu 500mtr/roll 200 x 300mm 35mu 500mtr/roll

VMAX3 VMAX3 VMAX3 PX2000

Please Note: The Pillopax PX800 only uses PPF200 film. HP film is not recommended for use on PX800/900/1500 machines.

Up to 90% warehouse storage saving over other void fill materials

=

8.20 8.20 8.20 8.20

voidstar Paper Void Fill System The new Pacplus VSTR60 Voidstar Paper Void Fill System is ruggedly constructed and a cost effective way of creating on-demand, impact-absorbing void fill from an environmentally friendly paper product with low pre-use storage requirements. Positioned on a bench or permanently wall mounted, it is an ideal solution for the kind of low-to-medium void fill production typically used by online mail order traders. Affixed to your work bench, the Pacplus VSTR60 Voidstar is the ideal means of creating impact-absorbing paper void fill. Pacplus VSP60 Void Fill Paper has been specially sourced for its suitability for use with the VSTR60 Voidstar and its excellent void fill properties.

When wall mounted, the Pacplus VSTR60 Voidstaroccupies a minimal footprint in your packaging and despatch operation.

13Kg

13Kg

PAPERS & PROTECTIVE PACKAGING

61

PAPERS & PROTECTIVE PACKAGING

High Performance Pillopax Film

Ecopax Cardboard Shredders create void fill from waste cardboard

Ecopax Cardboard Shredders ®

> Ecopax Shredders rapidly convert small quantities of used cardboard into high-volume void fill and protective matting > Low-cost and ecologically beneficial packaging that reuses cardboard waste and reduces disposal costs and landfill > Switching from void fill to matting production is completed in less than 5 seconds > Operator-friendly feed with a punched measuring scale makes creation of matting to precise widths easy > No machine adjustment is required for differing card width or thickness > Most models are fitted with an integral dust extraction connector

eco-friendly void fill created from your waste cartons

The Ecopax cardboard shredder range now includes two improved energy-efficient models

protective matting option from your used cartons on demand

30% Energy Saving over previous Ecopax models but with the same output!

All Ecopax shredders still feature all the benefits you expect from this quality brand but the range now includes machines with an equally powerful but lower energy operating system. Energy-efficient drive technology powered through a frequency inverter gives: > > >

High motor torque even at low speeds for more powerful shredding action Low maintenance reduces loss of productivity through downtime Power consumption reduced by 30%!

> Standard dust > New IEC/EN 60204-1 extraction device compliant circuit built into all models breaker (except CP316S2-I)

CP316S2-I Cardboard Shredder Single Phase

Cuts

Run Time

Dust Extraction

Power

320mm

2 hours

X

1.0kw (1ph)

wide

Cuts

Production Output 3

Dimensions (w x d x h)

Warranty

10mm

1-2m /hr

660 x 660 x 980

12 Months

thick

Throughput rate 10m/min

Weight: 92kg Footprint: 0.5sqm

as standard

CP316S2-I 62

230v 50-60Hz

Produces Void Fill or Protective Matting Material

PAPERS & PROTECTIVE PACKAGING

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CP316S24MM

Produces 4mm wide strips

Eco-friendly solutions that help to reduce your carbon footprint

Ecopax Cardboard Shredders

Cuts

Run Time

320mm

2 hours

Production Output

Cuts

Power

Dust Extraction

wide

3

1.1kw (1ph) 230v 50-60Hz

Dimensions (w x d x h)

Warranty

12mm

2-3m /hr

660 x 1060 x 980

12 Months

thick

Throughput rate 12m/min

Weight: 110kg Footprint: 0.5sqm

as standard

CP320S2-I

PAPERS & PROTECTIVE PACKAGING

CP320S2-I Cardboard Shredder Single Phase

Produces Void Fill or Protective Matting Material

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CP320S24MM

Produces 4mm wide strips

CP422S2-3PH Cardboard Shredder Three Phase

Cuts

Run Time

420mm

Unlimited

wide

Production Output

Cuts

Power

Dust Extraction

3

1.8kw (3ph) 200v-400v 50-60Hz

Dimensions (w x d x h)

Warranty

15mm

4-6m /hr

660 x 660 x 980

12 Months

thick

Throughput rate 13m/min

Weight: 125kg Footprint: 0.5sqm

as standard

CP422S2-3PH

Produces Void Fill or Protective Matting Material

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CP422S24MM-3PH

CP422S2-240V

Produces 4mm wide strips

3 phase machine with 240 volt converter

CP428S2 Cardboard Shredder Three Phase

Cuts

Run Time

420mm

Unlimited

Dust Extraction

wide

Power

3.0kw (3ph) 200v-400v 50-60Hz

Cuts

Production Output

Dimensions (w x d x h)

Warranty

17mm

6-9m3/hr

800 x 750 x 1100

12 Months

Throughput rate 14m/min

Weight: 125kg Footprint: 0.5sqm

as standard

thick

CP428S2

Produces Void Fill or Protective Matting Material

£5971.50 each

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

CP428S24MM

Produces 4mm wide strips

SFP100-1K

SFP200-1V

Dust Extraction Unit

Dust Extraction Unit

> Single phase dust extraction unit complete with 3 metre connection hose > Connect to cardboard shredder to reduce dust > Weight 45kgs

ase - h it le-ph Sing for use w ase ble suita single-ph the 320S2-I CP

> Three phase dust extraction unit complete with 3 metre connection hose > Connect to cardboard shredder to reduce dust > Weight 45kgs

£5971.50 each

se -pha m u rful 3 Powe for optim r moto suction

PAPERS & PROTECTIVE PACKAGING

63

Plastic pallets provide a tough, hard wearing alternative to traditional wooden pallets

Plastic Pallets

Our range of nestable, open deck, lightweight plastic pallets A range of robust, durable plastic pallets that offer a highly cost effective option with a much greater life expectancy than wood. Perfect for the Fresh Produce, IT, Engineering and Pharmaceutical sectors where hygiene and clean working environments are essential.

Code

Description

Size (mm)

Weight

Dynamic Load

Static Load

Colour

6040BK

Plastic Nestable Display Pallet

600 x 400

>1kg

N/A

150g

Grey

6080BK

Plastic Nestable Half Euro Pallet

600 x 800

3.7kg

400kg

1200kg

Black

1208BK

Plastic Nestable Pallet

1200 x 800

5.4kg

800kg*

2500kg

Black

1210BK

Plastic Nestable Pallet

1200 x 1000

5.9kg

800kg*

2500kg

Black

1208PR

Plastic Runner for 1208 Pallet, increases dynamic load by 200kg

1210PR

Plastic Runner for 1210 Pallet, increases dynamic load by 200kg

*1000kg when flat loaded

1208BK

1210BK

Best r Selle

Best r Selle

1210PR

6040BK

Large stocks available. Other pallet specification available, please call our sales team for more details.

64

PAPERS & PROTECTIVE PACKAGING

> > > > > > > > > > > > > > > > > > > > >

Kraftek Edge Boards Trans Tarp Tarpaulins Slipguard Anti-Slip Sheets Kit Start Strapping Kits Strapping Tools for PP Strapping Battery Powered PP/PE Tools Tools for Cord & Composite Polyester Tools for Steel Strapping Strapping Dispensers Stainless Steel Strapping Buckles & Strapping Seals Safeguard Strapping Seals Plaztek Edge Protectors Steel Strapping Polypropylene Strapping Trimax Polyester Strapping Woven Cord Polyester Strapping Hotmelt Cord Polyester Strapping Composite Polyester Strapping Bale Press Strapping Auto & Semi-Auto Strapping Machines

STRAPPING PRODUCTS & CONSUMABLES

strapping products & consumables 66 67 67 68 70 73 75 76 77 78 80 81 83 84 85 86 87 87 87 87 88

STRAPPING PRODUCTS & CONSUMABLES

65

Choose from over 30 types of high quality Kraftek Edge Boards suitable for a range of pallet sizes

Kraftek Edge Boards More sizes available PLEASE ASK SALES TEAM FOR MORE DETAILS

inst s aga edge ping x o b of strap y and ction rom it Prote amage f d stabil orm a d nif lo u d r e o c f n Enha bridging ation void palletis clable recy 100%

Eco Friendly Edge Boards > Low Cost > 100% Recyclable > Vast range of stock sizes Old Code

New Code

KVB353475

KVB35.3.475

475mm

35mm x 35mm

KVB354532

KVB35.4.532

532mm

35mm x 35mm

KVB5035580

KVB50.35.580

580mm

KVB5035780

KVB50.35.780

KVB7538

Length

Width

Thickness 3mm

Qty Per Pack 50

Qty Per Pallet 8000

3.15

4mm

25

5100

3.45

50mm x 50mm

3.5mm

50

3150

3.80

780mm

50mm x 50mm

3.5mm

50

2250

4.20

KVB75.3.800

800mm

75mm x 75mm

3mm

25

2500

6.30

KVB50.3.900

900mm

50mm x 50mm

3mm

50

6300

KVB35391

KVB35.3.910

910mm

35mm x 35mm

3mm

50

6000

6.05

KVB351000

KVB35.2.1000

1000mm

35mm x 35mm

2mm

50

6300

5.90

KVB353

KVB35.3.1000

1000mm

35mm x 35mm

3mm

50

5100

6.50

KVB45310

KVB45.3.1000

1000mm

45mm x 45mm

3mm

50

3000

KVB502

KVB50.2.1000

1000mm

50mm x 50mm

2mm

50

5400

6.10

KVB503

KVB50.3.1000

1000mm

50mm x 50mm

3mm

50

2700

9.70

KVB603

KVB60.3.1000

1000mm

60mm x 60mm

3mm

25

2700

11.45

KVB35312

KVB35.3.1200

1200mm

35mm x 35mm

3mm

50

4200

8.00

KVB50312

KVB50.3.1200

1200mm

50mm x 50mm

3mm

50

3000

11.60

KVB50351280

KVB50.35.1280

1280mm

50mm x 50mm

3.5mm

50

2500

6.50

KVB6021300

KVB60.2.1300

1300mm

60mm x 60mm

2mm

50

6000

KVB35315

KVB35.3.1500

1500mm

35mm x 35mm

3mm

50

4200

9.80

KVB50315

KVB50.3.1500

1500mm

50mm x 50mm

3mm

50

3000

13.40

KVB35175

KVB35.3.1750

1750mm

35mm x 35mm

3mm

50

4200

11.35

KVB503175

KVB50.3.1750

1750mm

50mm x 50mm

3mm

50

2700

13.60

KVB35318

KVB35.3.1800

1800mm

35mm x 35mm

3mm

50

4200

11.85

KVB50318

KVB50.3.1800

1800mm

50mm x 50mm

3mm

50

2700

17.85

KVB75318

KVB75.3.1800

1800mm

75mm x 75mm

3mm

25

2000

13.80

WEB1000

KVB100.5.1000W

1000mm

100mm x 100mm

5mm

20

1120

23.10

KVB35320

KVB35.3.2000

2000mm

35mm x 35mm

3mm

50

4200

14.20

KVB50320

KVB50.3.2000

2000mm

50mm x 50mm

3mm

50

2700

19.25

KVB60320

KVB60.3.2000

2000mm

60mm x 60mm

3mm

25

2700

21.95

WEB1830

KVB100.5.1830W

1830mm

100mm x 100mm

5mm

20

1120

13.75

Corrugated Corner Protectors and Perforated Edge Boards Perforated 200mm at intervals Code

Length

Width

Thickness

Qty Per Pack

CP80120

1200mm

80mm x 80mm

15mm 6ply

50

CP50120

1200mm

50mm x 50mm

15mm 6ply

50

Code

Description

Qty Per Pack

1-3 Packs

CPC80

Corrugated corner protectors 80 x 80 x 80mm (internal)

290

£98.85/pack £95.25/pack

ctive e t effe th A cos of using ic s m meanst econo mo lengths

4+ Packs

Moisture Resistant Kraftek Edge Boards Use Moisture Resistant Kraftek for outdoor applications that are exposed to moisture. Width Thickness Qty Per Pack

ture Mois tant resis 0% 10 ble la recyc

Old Code

New Code

Length

MRVB353

MRVB35.3.900

900mm

35mm x 35mm

3mm White

50

6000

MRVB3531000

MRVB35.3.1000

1000mm

35mm x 35mm

3mm White

50

5000

66

STRAPPING PRODUCTS & CONSUMABLES

Qty Per Pallet

Essential pallet packaging accessories to help maintain the integrity and quality of palletised loads

STRAPPING PRODUCTS & CONSUMABLES

Essential Logistics Packaging & Equipment

A range of high quality, fully eyeleted, durable industrial tarpaulins designed to maintain the quality and product integrity of your stored products, both for outside and inside storage applications.

Transtarp Industrial Tarpaulins Code

Description

TP4102 Industrial Tarpaulin 3m x 2m Fully Eyeleted

0.55

TP4103 Industrial Tarpaulin 5m x 4m Fully Eyeleted

1.80

TP4104 Industrial Tarpaulin 8m x 5m Fully Eyeleted

3.45

TP4105 Industrial Tarpaulin 10m x 6m Fully Eyeleted

4.95

TP4106 Industrial Tarpaulin 12m x 8m Fully Eyeleted

8.45

tion otec st pr and u d r and rage Wate ring sto tation du nspor ges ed ed tra ylett e e , d iv e orc in f Reinf vailable A sizes

Available in 5 different sizes to suit your storage or weatherproofing application

Protective Layer Sheets Layer sheets for placing on a pallet prior to stacking goods for added product protection.

Code

Size

LS170-1077-916 1077mm x 916mm x 170 Gsm

Qty per pallet 3000

Ratchet Strap The Transtarp RAST254 is a two-part ratchet strap fitted with double hooks for fast, positive load securement. The 25mm woven strap has a breaking strain of 500kg, making it the perfect choice for lighter applications. RAST254 Transtarp Ratchet Strap, two-part strap with double hooks, 25mm x 0.4mtr/4.6mtr, 500kg b/s

To complement our range of Logistics Packaging Products, we are pleased to present our range of Anti-Slip Layer Sheets.

p ti-sli g an rmin em o f r e t tilt p s Best sheet sy p to 45° t u n e e v iv e r t fec nt to p ly ef High er repelle damage Wat oisture through m ding sprea pallet

> Stabilise pallet loads of sacks, bags and cartons > Reduction of secondary packaging, such as stretchfilm & strapping > Efficient on all materials - paper, corrugated, cartons, glass and plastic packing > Water repellent, ideal for preventing moisture damage > High performance - effective up to angles of 45˚ > Unique anti-slip coating

Code: ASL0812-10 800mm x 1200mm, 100gsm Anti-Slip Sheet

Code: ASL1012-10 1000mm x 1200mm, 100gsm Anti-Slip Sheet

Packed 200 sheets/box

Packed 200 sheets/box

or Bulk Packed 5000 sheets/pallet

or Bulk Packed 5000 sheets/pallet

STRAPPING PRODUCTS & CONSUMABLES

67

A range of Strapping Kits created to offer a cost effective introduction to strapping

Kit Start Strapping Kits Buy these products as kits for FURTHER COST SAVINGS

PPSK8 TENSIONER/SEALER KIT

l -leve Entryssional profe pping stra tem sys

Kit comprises: > Dispenser (PSD4) > 12mm Tensioner (TST30) & 12mm Sealer (SGP12) > Coil of Strapping (TT45 12mm x 1500mtr) > 500 Seals (SO34) *Strap supplied in black

The one-stop solution for all your strapping requirements, from the Pacplus professional packaging range

2 PARCELS

BSK600 BUCKLE STRAP KIT rtable y, po it Hand pping k edium ra st low-m l for sage ls Idea u t too cialis e p No s required

PPSK10 TENSIONER/SEALER KIT

Kit comprises: Kit comprises:

> 600 mtrs of black strapping > 200 Plastic Buckles

elling Top-smounted y trolletrapping s m syste

> Trolley (PD40) > 12mm Tensioner (TST30) & 12mm Sealer (SGP12) > Coil of Strapping (TT45 12mm x 1500mtr) > 500 Seals (SO34) *Strap supplied in black

3.4kg

SBX600 STRAP BOX rtable y, po it Hand pping k edium ra st low-m l for sage r Idea u ack fo fill p it re l Idea PPSK5 k

2 PARCELS

Kit comprises: > 600 mtrs of black strapping > 250 12mm Semi Open Seals (SO34)

PPSK20 COMBI KIT

lleyal tro ping p ssion Profe nted straith mou ystem w ion s inat combtool

3.5kg

Kit comprises:

PPSK5 STARTER PACK Kit comprises: > > > >

> Trolley (PD40) > Combination Tool (SPC12) > Coil of Strapping (TT45 12mm x 1500mtr) > 500 Seals (SO34) *Strap supplied in black

r tarte ost s al Low-cfor met kit l plastic sea pping stra

12mm Tensioner (TST30) 12mm Sealer (SGP12) 600 mtrs of black strapping 250 12mm Semi Open Seals (SO34)

7.0kg

2 PARCELS

PPSK44 COMBI KIT l -leve Entryssional m profe g syste n tio pin strap combina with tool

PPSK6 STARTER PACK

r tarte ost s seal Low-cr metal ing, p fo p kit tic stra tion plas combina with tool

Kit comprises: > Dispenser (PSD4) > Combination Tool (B12) > Coil of Strapping (TT45 12mm x 1500mtr) > 2000 Seals (SO34) *Strap supplied in black

Kit comprises: > Combination Tool (B12) > 600 mtrs of black strapping > 250 12mm Semi Open Seals (SO34) 7.0kg

68

STRAPPING PRODUCTS & CONSUMABLES

2 PARCELS

Polyester Kit Start strapping kits are the safer alternative to steel strapping

Kit Start Strapping Kits CSK PORTABLE CORD POLYESTER STARTER KIT

WPSK WOVEN POLYESTER STARTER KITS

Kit comprises:

Kit comprises:

> 1 coil 13mm x 500mtr Cord > Polyester Strap 375kg B/S > 200 x CB4G Galvex metal buckles

ed ount lley-mr duty ie ns nal tro v a io s e s h Profestem for applicatiooven sy pping ble w stra tensiona pping, a re ra s Use lyester st rnative po fer alte l sa to stee

> 1 coil of woven polyester strap > CSM20 Mobile Trolley > CST20 Tensioner > 1000 metal buckles

WPSK13 13mm WPH40 Kit

rtable y, po it Hand pping k vier ra st hea g d to in Suite y strapp ns t u d catio appli

WPSK16 16mm WPH55 Kit

2

5kg

PARCELS

WPSK19 19mm WPH65 Kit

EXPSK13

13mm PTR25 KIT

EPK13

13mm EXTRUDED COMBI STARTER KIT

Kit comprises: > 1 coil of extruded polyester strap (PTR25 ey12.5mm x 1600mtr) l troll sionaystem for s fe Pro ted s strap n mou vier duty ns > PD40 Mobile Trolley hea pplicatio a > HPT50 Tensioner > OFH Sealer (12mm) > 1000 serrated clips (SER 12SG)

Kit comprises:

> 1 coil of extruded polyester strap (PT30 el city rees 12.5mm x 2000mtr) -capa d High er, Inclu n hold binatio > MW60 H.D. Trolley m o c tool > RSK 12 Combi Tool > 1000 serrated clips (SER 12SG)

2 parcels

16mm PTR45 KIT

EPK16

> 1 coil of extruded polyester strap (PTR45 y15.5mm x 1200mtr) trollefor l a n m ssio Profe ted systestrap > PD40 Mobile Trolley n u ty mo vier du ns hea pplicatio > HPT50 Tensioner a > OFH Sealer (16mm) > 1000 serrated clips (SER 16SG) 2 parcels

2 parcels

16mm EXTRUDED COMBI STARTER KIT

Kit comprises:

HEAVY DUTY COMBI KIT Kit comprises:

> 1 coil of extruded polyester strap (PTR25 y e ll al trom for ssion 12.5mm x 1600mtr) Profe ted systestrap n mou vier duty ns > PD40 Mobile Trolley hea pplicatio a > RSK 12 Combi Tool > 1000 serrated clips (SER 12SG)

2 parcels

EXPSK16

EHD13

EHD16

Kit comprises:

HEAVY DUTY COMBI KIT Kit comprises:

> 1 coil of extruded polyester strap (PTR45 y lle al trom for ssion 15.5mm x 1200mtr) Profe ted systestrap n mou vier duty ns > PD40 Mobile Trolley hea pplicatio a > RSK 16 Combi Tool > 1000 serrated clips (SER 16SG)

> 1 coil of black polyester strap (PT40 el city rees 15.5mm x 1750mtr) -capa d High er, Inclu n hold binatio > MW60 H.D. Trolley com tool > RSK 16 Combi Tool > 1000 serrated clips (SER 16SG)

2 parcels

2 parcels

STEEL STARTER STRAPPING KITS

TSSK

STEEL STRAPPING TENSIONER/ SEALER STARTER KITS Kit comprises: > > > > >

y Heavy dut g in p p stra it k

SCSSK

STEEL STRAPPING COMBI STARTER KITS

1 coil of ribbon wound steel strapping 1 SD32 Strapping Dispenser 1 TS Steel Strap Sealer 1 TLS Steel Strap Tensioner 2000 Snap-On Seals

Kit comprises: > 1 coil of ribbon wound steel strapping > 1 SD32 Strapping Dispenser > 1 QST Sealless Combination Tool

TSSK13 13mm Kit

3 SSC04 strap cutter recommended not included in this kit

SCSSK13 13mm Kit

TSSK16 16mm Kit

PARCELS

TSSK19 19mm Kit

ty y du Heavping kit strapcludes n In inatio combtool

3 SSC04 strap cutter recommended not included in this kit

SCSSK16 16mm Kit

PARCELS

SCSSK19 19mm Kit

STRAPPING PRODUCTS & CONSUMABLES

69

STRAPPING PRODUCTS & CONSUMABLES

POLYESTER STRAPPING KITS

One of the most comprehensive ranges of polypropylene strapping tools available to the packaging distributor

Polypropylene Strapping Tools POLYPROPYLENE COMBINATION TOOLS

Pacplus®

Optimax®

SPC12 SPC16

RSK12 RSK16

duty ium Med ool t

®

ol ion to binat g comted seals y in ll e Top-s for serra n capacitncy tensio fficie High um seal e orizontal h Optiml for both ical Idea and vertion t opera

Strap specification for polypropylene & polyester strapping no adjustment is required for strap thickness 0.40mm-0.90mm

SPC12 use SO34 Semi Open Seal SPC16 use SO16 Semi Open Seal

12mm/16mm standard combination tool for polypropylene strapping. Available in 12mm or 16mm. State size when ordering.

Kinetix®

3.8kg

Lightweight combination tool for flat packages. (i.e. pallets, bales, crates, cases etc.) Can be used with polypropylene or polyester strap. The windlass tensioning system provides very high strap tension. Special serrated seals and sealing mechanism guarantee very high seal joint efficiency.

4.5kg

use SER serrated

Pacplus®

B12

wlar lo u p o P tool cost

SHC12 SHC16 Heavy duty combination tool for use with polypropylene and polyester strapping. The SHC uses serrated seals for optimum seals efficiency. The SHC is capable of applying exceptionally high tension especially on polyester strapping and is ideal for horizontal & vertical strapping applications even in demanding environments.

Strap Specification for polypropylene & polyester strapping. Widths 12 -16mm. Thicknesses 0.50mm 0.90mm. Please give strap specifications when ordering.

l for n too inatio b m o city eals ty c y du errated s sion capa s Heav en igh t fficiency h y ll e & a seal ntal ption Exce ptimum th horizo n O or bo operatio f l a Ide ertical 3.75kg v

Use SER serrated

Optimax®

LPC12 LPC16 ®

tool tion n bina com h tensio r e v y hig le-le Sing eptionall acity cy cap l efficien tal Exc sea orizon m u h Optim for both peration l Idea ertical o v & The LPC is a lightweight combination tool for use PP and polyester strapping. The LPC uses serrated seals for Strap Specification optimum seal efficiency. The for PP & polyester windlass tensioning system allows strapping. very high strap tension. An ideal tool Widths 11mmfor a variety of applications for both 16mm. Thicknesses vertical and horizontal strapping. 0.50mm - 0.90mm. LPC13: 11-13mm LPC16: 15-16mm Please give strap specifications when ordering. Also known as a Konrad Tool.

12mm budget combination tool for polyprop strapping Available in 12mm only. Use SO34 Semi Open Seal

70

4.5kg

3.6kg

STRAPPING PRODUCTS & CONSUMABLES

use SER serrated

PP offers the strength benefits of steel but is also weatherproof for outdoor applications and safer to use

POLYPROPYLENE STRAPPING TENSIONERS

Pacplus®

Pacplus®

Optimax®

TST30

TB301C

HPT50 ®

tenstrap elling r Top-s sione y good all r ption Exce value fo ey o m n

Standard tensioner for polypropylene strapping up to 16mm

ner ensiop uty t avy dhigh stra e h Extraood for ion G tens hings for duct s bus Bras nded pro exte life

ty y du r Heav ensione t p stra hrome C d e plat

1.3kg

Heavy duty tensioner for polypropylene strapping up to 19mm

1.5kg

Heavy duty tensioner for polypropylene and polyester strapping up to 19mm

Optimax®

Kinetix®

Pacplus®

OXT50

TS3215

MPT

2.2kg

ized cket-s ct, po ner a p m o io Co tens rmance t perfo High size ratio

®

Heavy duty tensioner for polypropylene, polyester and corded strapping up to 19mm

g. earin ller b s for tch rolass allowion lu c way ind ens One linder w g. Steel t use. y Six c sy loadin r long-lifeeth e o a f e ndle er-t ha arp gripp sioning Sh igh ten r for h polyeste . 2.2kg ping strap

l, low -leve er Entry tension t s co

Budget tensioner for polypropylene strapping up to 16mm

1.3kg

Compact tensioner for polypropylene strapping upto 16mm

POLYPROPYLENE STRAPPING SEALERS

Pacplus®

SGP12 SGP16

Optimax® r seale strap good elling y Top-s eptionall oney Exc e for m valu

PSH12 PSH16 ®

Pacplus® p y stra y dut Heav sealer ncy ie ic ff seal e High

KNS12 KNS16

1.85kg

Optimax® od lly go tiona ney Excep e for moiciency lu f va seal ef d te er High sing serra u seals

OFH12 OFH16 ®

ated y serr y dut Heav sealing eal s um Optimiciency eff

12mm/16mm standard polypropylene strap sealer. Please state size when ordering. SGP12 - use SO34 seals, SO1232 H.D. Seals or SC12 closed seals SGP16 - use SO16 seals or SO1632 H.D. Seals

2.0kg

12mm/16mm heavy duty polypropylene strap sealer with high efficiency sealing jaws. Please state size when ordering. PSH12 - use SO34 seals, SO1232 H.D. Seals or SC12 closed seals, PSH16 - use SO16 seals or SO1632 H.D. Seals

12mm/16mm polypropylene strapping sealer with offset jaws. Designed for use with SER serrated seals for improved seal efficiency. State size when ordering.

2.25kg

12mm/16mm heavy duty polypropylene strapping sealer with offset jaws. Designed for use with SER serrated seals for improved seal efficiency. State size when ordering.

2.0kg

Use SER12/16 serrated seals

2.25kg

Use SER12/16 serrated seals

STRAPPING PRODUCTS & CONSUMABLES

71

STRAPPING PRODUCTS & CONSUMABLES

Polypropylene Strapping Tools

Extruded polyester strapping tools designed to offer application choice and complete flexibility

Polyester Strapping Tools EXTRUDED POLYESTER STRAPPING TOOLS

Optimax®

Optimax®

Optimax®

HPT50

OXT50

QRS

®

®

®

ner ensiop uty t avy dhigh stra e h Extraood for ion G tens hings for duct s bus Bras nded pro exte life

Heavy duty tensioner for polypropylene and polyester strapping up to 19mm

2.2kg

Heavy duty tensioner for polypropylene, polyester and corded strapping up to 19mm

ing. bear r roller allows fo h c t clu dlass nsion way in e One linder w g. Steel t use. y Six c sy loadin r long-lifeeth ea ndle fo per-te g ha arp grip sionin Sh igh ten r for h polyeste . ping strap 2.2kg

y y dut -heav Extra ensioner ipper t r g e vativ m Inno echanis lass m wind e u Uniq return

Heavy duty tensioner for PP and polyester strapping up to 19mm. Innovative gripper mechanism and unique windlass return for faster and easier strap loading.

Pacplus®

Optimax®

Optimax®

Kinetix®

KNS12 KNS16

OFH12 OFH16

QOS12 QOS16

KSP12

®

®

12mm/16mm heavy duty polypropylene and polyester strapping sealer with offset jaws. Designed for use with SER serrated seals for improved seal efficiency. State size when ordering.

12mm and 16mm polyester strapping sealers for use with serrated seals. The QOS features a unique staggered, symmetrical jaw which eliminates the need to orientate the tool when sealing.

2.25kg

2.0kg

Use SER12/16 serrated seals

Use this tool without having to match the jaws with the seal - Saves time and reduces risk of seal failure

ated y serr y dut Heav sealing eal s um Optimiciency eff

od lly go tiona ney Excep e for moiciency lu f va seal ef d te er High sing serra u seals

12mm/16mm polypropylene and polyester strapping sealer with offset jaws. Designed for use with SER serrated seals for improved seal efficiency. State size when ordering.

Use SER12/16 serrated seals

Use SER12/16 serrated seals

Optimax®

QOS19

QXS

®

aler cy et se n Budgeal efficie s r ted e h Hig sing serra u seals

12mm/16mm budget polyester strap sealer.

2.3kg

Optimax®

2.0kg

Use SER12/16 serrated seals

®

to sign w de effort a j e g u Uniq ce sealin uty redu Heavy d ion truct cons Heavy duty polyester strapping sealer for use with SER19SG 19mm serrated seals. Ideal for heavy duty applications where 19mm strap can provide increased breaking strain. Unique jaw design for reduced sealing effort. 4.4kg

Use SER19 serrated seals

72

2.2kg

STRAPPING PRODUCTS & CONSUMABLES

rap de st m wi city m 2 3 capa vy duty hea tion Extraconstruc t s a c Heavy duty tensioner for polyester strapping up to 32mm wide and up to 1.3mm thick. Ideal for use with the QOS19 sealer. Advanced design for the heaviest PET applications. Patented vertical gripper motion allows for easy strap release and greater holding power. High quality casting ensures maximum durability.

3.1kg

The ZXT range of battery powered strapping tools provides industry leading strapping tension

Battery Powered Strapping Tools Optimax®

ZXT12

STRAPPING PRODUCTS & CONSUMABLES

Optimax Friction Weld Tool, for 12mm PET/PP strap, 18V Li-ion battery/charger

Improved 18v 4.0Ah Li-ion battery provides increased productivity up to 440 cycles per charge*

ZXT16

Optimax Friction Weld Tool, for 16mm PET/PP strap, 18V Li-ion battery/charger

ZXT19

Optimax Friction Weld Tool, for 19mm PET/PP strap, 18V Li-ion battery/charger

* Dependent on strap type, thickness, tension settings and application

®

high y l l a ption acity Exce sion cap ation tool ten lever combl ienfficienctyal ea on leSing timum s th horiz Op l for bo tical r Idea and ve tion a r e op

The new ZXT 18V 4.0Ah Li-ion battery-powered strapping tool features some of the most advanced benefits available on the market today:

> > >

>

>

> > > >

Patented brushless single motor design provides extremely long service life. New 18V 4000mAh high-capacity battery provides increased productivity. ZXT1216 & ZXT1216PP tension range of up to 250Kg. ZXT1216 & ZXT1216PP tension range of up to 400Kg. Patented strap gripper design for improved tension.

Please ensure your client is running PET with the new ZXT, if they are using a PP – please clearly state on order the SKU code for the PP version.

> > >

Single handed operation. Soft mode for light or fragile packages. Lightest model in its class (3.5 Kg including battery). Pre-programmed touch panel with digital signal to suit different applications. Suitable for polyprop* and polyester strapping. Extremely simple strap feed, with both straps being inserted together. Strap is tensioned and sealed and cut quickly and efficiently.

*Please ensure you use PET with the new ZXT if you are using a PP –please clearly state on order so the tool can be converted and commissioned prior to despatch.

Friction Weld Seal 3.4kg

Strap Specification For Polyprop strapping/polyester strapping Strap width (please state when ordering). 12-19mm, Strapping thickness range 0.65 – 1.27 Straps per cycle per charge 440* Tool weight including battery 3.5 Kilo Tool dimensions with Li-ion battery 330 x 150 x 125mm Battery charger voltage 230v Recharge time 30 Minutes *Please note strapping cycles of full battery vary based upon strap quality, specification, set tension, set sealing time, operation habits, ambient environment and tensioning distance.

ZXT12 ZXT16 ZXT19 tool including battery and charger

ZXTBAT-R Replacement 18V Li-ion Battery for Optimax ZXT12, ZXT16 and ZXT19 tools

STRAPPING PRODUCTS & CONSUMABLES

73

The most advanced battery powered strapping tools for polyester and PP strapping on the market

Battery Powered Strapping Tools Optimax®

TVX12-Li (12mm) TVX16-Li (16mm)

The TVX Li-ion battery powered tool is one of the fastest on the market - in less than three seconds, the strap is tensioned, sealed and cut.

®

Complete System now includes Battery and Charger as standard. No need to order separately.

The ergonomic and rugged design assists maximum operator comfort, with minimal effort. Packages such as boxes, pallets, bales and crates can be safely strapped. Strap feeding is extremely simple, with both straps being inserted together. The TVX has an exceptional tension range and applies up to 240kg (2400N) with ease. The flexible sealing mode allows you to choose from semi-automatic or single button fully automatic operation. 4.5kg

Friction Weld Seal

Improved Li-ion Battery Pack TVX12-Li (12mm) TVX16-Li (16mm) Strap Specification Polyester: Polypropylene: Strap width: Strap tension: Tool weight inc. battery:

Optimax®

The BXT is the latest generation of battery powered strapping tools.

BXT216 Friction Weld Seal ®

The balanced lightweight design is exceptionally comfortable to use, yet withstands heavy usage in the most demanding applications. Incorporating many advanced features including automatic and semi automatic functions, a new direct drive motor offering an increased tension range and a light setting for PP strapping, all controlled via the new digital Touch-Pad controller. These improved operating features result in a tool that is faster and easier to operate, has better process control, more

Strap Specification Tool Weight Strap Requirements Sealing Method Applied Tension Force Strap Thickness Range Strap Width Range Take-up Speed Dimensions Battery Type Charge Time Cycles per Charge

74

Complete System now including Battery & Charger 0.4mm - 1.05mm 0.7mm - 1.05mm 12-16mm Please specify when ordering Fully adjustable up to 240kg (2400N) (max ten. depends on strap spec) 4.5 kilos

STRAPPING PRODUCTS & CONSUMABLES

3.9kg PET or PP Strapping Friction Weld 400-2500N 0.5 to 1mm 12-16mm 220mm per second 334 x 138 x 148mm Bosch 14.4v 2.6 amp Li-Ion 15 to 30 minutes 200 to 400

TVX/BC-Li TVX Battery Charger

TVX/BAT-Li Li-on Battery 14.4 3.0Ah

Recharging Time Approx: 38 mins

Battery Life up to 3000 Charges

cycles per battery charge and has low maintenance costs. The new BXT models are also powered by an improved lithium ion battery pack that can be charged when convenient to the operator rather than waiting until the battery is fully drained. The new battery also offers an improved 15-30 minute recharging time, up to 50% more cycles compared to NiCad batteries and is more environmentally friendly due to it containing no Cadmium. The BXT models can also be adapted to use main power with the optional power kit.

3.67kg

BXT 216 12-16mm tool including battery & charger Please specify whether for 12mm or 16mm on ordering. 19mm also available P.O.A. BXTV2BAT 14.4V Spare Battery

Specialist tools designed for use with cord and composite polyester and PP strapping

Cord & Composite Polyester Strapping Tensioners HPT50

Pacplus®

Optimax®

CST20

QPT

ty y du nsion heav te Extra igh strap for for h ings Good ass bush roduct p Br d nde exte life

®

®

ner tensio y duty er -heav tive gripp a tr x E va Inno chanism s s me indla ue w Uniq turn re

strap elling Top-s nsioner od o te ally g ey n ption Exce e for mo valu

Standard tensioner for woven and composite polyester strapping up to 19mm.

1.25kg

2.2kg

Use CB Buckles

Heavy duty tensioner for composite and woven cord polyester strapping up to 19mm. Unique windlass return mechanism for faster and easier strap loading.

Use CB Buckles

1.85kg

Use CB Buckles

Heavy duty tensioner for polypropylene, extruded polyester, cord and composite polyester strapping up to 19mm.

Optimax®

Kinetix®

HTC20

OXT50

use le to Simp et hand g d u r b ione tens

Budget hand tensioner for hotmelt polyester strapping up to 19mm.

g. earin ller b s for tch rolass allowion lu c y s d n wa in One linder w g. Steel te use. y Six c sy loadin r long-lifeeth ea ndle fo per-te g p a ri h arp g nin Sh igh tensior for h polyeste . g in p strap

®

2.2kg

Use CB Buckles

Heavy duty tensioner for polypropylene, polyester and corded strapping up to 19mm

1-9 Tools

HTC20

£1.92

2.2kg

10+ Tools

£87.87 £83.33 each

each

Optimax®

Optimax®

Pacplus®

CHD

CHD-RA1216

RTC25

each

®

®

p m stra 25 m Up to width s for t hmen ular Attac and irreg d n s u k c ro Heavy duty tensioner for woven and pa composite polyester strapping up to 25mm. 2.2kg

Use CB Buckles

strap 25mm d and Up to. For roun cks widthregular pa ir

New CHD tensioner attachment for strapping round and irregular packs with corded polyester strapping. An ideal replacement for steel strapping.

Round pack tensioner for woven and composite polyester strapping up to 25mm. 0.2kg

2.2kg

Use CB Buckles

Optimax®

Optimax®

Pacplus®

QXT38

HDP40

JTP3240

®

®

n ructioth const duty strap widr y v a m He 40 m andle fo Up totended h sioning Ex her ten hig

iest Heav ner in sio n e t duty ange r Heavy duty tensioner for composite and woven cord polyester strapping up to 38mm. The QXT38 features an advanced patented design for the heaviest applications.

Heavy duty Optimax tensioner for composite and woven cord polyester strapping up to 40mm. Designed for heavy duty applications.

2.95kg

Use CB Buckles

Low cost Jumbo tensioner for woven and composite polyester strapping up to 40mm. 2.5kg

2.5kg

Use CB Buckles

Use CB Buckles

STRAPPING PRODUCTS & CONSUMABLES

75

STRAPPING PRODUCTS & CONSUMABLES

Optimax®

Heavy duty, high quality strapping tools designed specifically for steel strapping applications

Steel Strapping Tensioners & Sealers STEEL STRAPPING TENSIONERS

Optimax®

Optimax®

FP

RP ®

®

y y dut Heav mm strap 9 1 Up to width

Heavy duty tensioner for steel strapping up to 19mm. Designed for flat pack applications.

2.5kg

Heavy duty tensioner for steel strapping up to 19mm. Designed for round and irregular packs such as pipes etc.

y y dut Heav regular /ir d n u Ro strapping pack 3.0kg

Use LAP seals with an SRD sealer

Optimax®

Pacplus®

Optimax®

FPH

TLS20

RPH ®

®

y y dut heav Extra o 32 mm t Up width strap

Heavy duty tensioner for steel strapping up to 32mm. Designed for flat pack applications.

2.7kg

y y dut ack heav p Extra/irregular d g Roun strappin m 32 m Up top width stra

, oney for m l Value -level too entry

Standard tensioner for steel strapping up to 19mm. Designed for flat pack applications.

STEEL STRAPPING SEALERS

Optimax®

Optimax®

SAS19 SAS25 SAS32

SRD12 SRD16 SRD19

ction ide-a nism a rful s Powe ing mech rator crimp uced opeusing Red when straineavy seals h

®

Heavy duty side action steel strapping sealer. The side action sealing method is of real benefit to heavy duty applications. Available in 19mm, 25mm or 32mm. State size when ordering.

3.65kg

Use LAP seals

Heavy duty tensioner for steel strapping up to 32mm. Designed for round and irregular packs such as pipes etc. 2.15kg

3.2kg

Use LAP seals with an SRD sealer

®

Heavy duty steel strapping single notch sealer. Ideal for heavy duty applications. Available in 13mm, 16mm and 19mm. State size when ordering.

Optimax®

Pacplus®

Optimax®

DNSA19 DNSA25 DNSA32

TS12 TS16 TS19

DNS12 DNS16 DNS19

®

ction ide-a nism a rful s Powe ing mech rator crimp uced opeusing d n e e R wh straineavy seals h

Heavy duty side action double notch steel strapping sealer. The side action sealing method is a real benefit to heavy duty application. Available in 19mm, 25mm or 32mm. State size when ordering.

4.95kg

®

Standard steel strapping sealer. Available in 13mm, 16mm and 19mm. State size when ordering.

Use LAP seals

76

1.1kg

Use LAP seals with an SRD sealer

STRAPPING PRODUCTS & CONSUMABLES

Use SOS seals

0.95kg

Heavy duty steel strapping double notch sealer. Ideal for heavy duty applications. Available in 13mm, 16mm and 19mm. State size when ordering. 1.15kg Use SOS seals

Steel strapping combination tools offer the fastest, most efficient method of effective steel strap sealing

Steel Strapping Combination Tools QST12 QST16 QST19

Ask about strap width interchangeability

®

Heavy duty steel sealless combination tool for flat pack applications. The QST is fully adjustable for 13mm, 16mm and 19mm. This tool has reversible punching dies for extended life. Please state size when ordering.

nism echa ing m o seals) p im r n ap c ss cost ( ss str le dies seal-le r action, unching e t s , le p ed life fa ib s r e thick d rev r exten .6mm fo p to 0 trapping u s t u s and c steel Seals ular duty reg

Sealless joint no seals required

3.95kg

Optimax®

OHT12 OHT16 OHT19

nd sile a h ten ls ig h e r te fo ned uty s ing desig regular d p crimp a r t s ss m is le ln sea mecha hing dies punc d life sible e rever r extend fo

®

Heavy duty steel sealless combination tool for flat pack applications. The OHT is designed for use with high tensile and regular duty steel strapping. Fully interchangeable for 13mm/16mm and 19mm. This tool has reversible punching dies for extended life. Please state size when ordering.

Sealless joint no seals required

4.3kg

Pacplus®

TLN13 TLN16 TLN19

nd sile a h ten ls ig h tee g for ned uty s in desig regular d p crimp a r t s s s m is le seal- mechan hing dies punc d life sible e rever r extend fo

®

Steel strapping combination tool for light duty flat pack applications. This tool will tension, crimp seal and cut strapping. Available in 13mm, 16mm and 19mm. State size when ordering.

4.3kg

Use TLN seals

For our Premium Grade Safeguard Seal range, please go to page 81 STRAPPING PRODUCTS & CONSUMABLES

77

STRAPPING PRODUCTS & CONSUMABLES

Optimax®

Steel strapping safety cutters and strapping dispensers help to create a safer working environment

Steel Strapping Safety Cutters & Dispensers STEEL STRAPPING SAFETY CUTTERS

Pacplus®

SSC06

Pacplus®

Pacplus®

SSC04

SSC10

Steel strapping cutter. Ideal for use with TLS20, FP and FPH tensioners for cutting steel strapping from the dispenser.

Heavy duty steel strapping safety cutter for steel strapping up to 50mm. The SSC10 is popular with timber importers and dock yards.

1.0kg

2.95kg

idth rap wtrap m st s 25 m se after er o t Up t relea r great Sof hear fo safety s ator oper

Standard steel strapping safety cutter for steel strapping up to 25mm. The SSC06 has rubber pads that clamp the strapping either side of the blade allowing the strap to be cut safely without any of the usual hazards.

tions pplica uty a rap widthp d y v t s ee ea For hto 50 mmndles to k up ded ha t safer a Extenoperator om shear nce fr dista

1.0kg

Optimax®

SSC08 ®

ns licatio y app idth y dut strap w rap v a e For hto 32 mm after st up t release greater Sof ear for afety sh rator s ope Heavy duty steel strapping safety cutter for steel strapping up to 32mm. The SSC08 has rubber pads that clamp the strapping either side of the blade allowing the strap to be cut safely without any of the usual hazards.

1.6kg

STEEL STRAPPING DISPENSERS

Pacplus®

SD32

Pacplus®

Pacplus®

MW60

NSD800 l for Idea -aisle w o r r na age us

Mobile trolley for ribbon wound steel strapping

15.3kg

Pacplus®

HDMW60

etal city mx capa o Largeool/seal br rubber t ete diam neven Large eels for u aces wh or surf flo Heavy duty dispenser for mill wound steel or polyprop/polyester on 406 core. Large capacity metal tool/seal box

36kg

78

STRAPPING PRODUCTS & CONSUMABLES

Mobile trolley for mill wound (oscillated) steel strapping

23.3kg

Narrow width ribbon wound steel strapping coil holder - ideal for use in narrow isle and manoeuvring between timber packs in saw mills for example. Fully adjustable for 12mm-32mm

13.3kg

Steel strapping combination tools offer the fastest, most efficient method of effective steel strap sealing

Pacplus®

Pacplus®

PD40

PSD4 Mobile dispenser for polypropylene strapping on plastic reel.

Static dispenser for polypropylene strapping on plastic reel.

7.2kg

3.3kg

Pacplus®

Pacplus®

Pacplus®

PTD406

PMC80

CSM20

Mobile dispenser for polypropylene strapping on cardboard 10.7kg core 200 mm diameter x 150/190mm wide core

Mobile dispenser for woven polyester strapping. (Except WPH105)

Mobile dispenser for PP / polyester strapping on cardboard core. 406mm diameter x 150mm wide core

20.7kg

Pacplus®

Pacplus®

CSD3

PCS6

7.1kg

Replacement Tool Boxes Code

Description

RTBOX-S PD40, PMC80, CSD3, CSM20 RTBOX-L SD32, MW60, PTD406

Replacement Coil Retaining Pins

Static dispenser for woven polyester strapping. (Except WPH105)

3.4kg

Static dispenser for polypropylene strapping on 200mm diameter x150mm/190mm wide core.

Stainless Steel Strapping

SBK Buckles

SBT

Code Description SBK12 12mm x stainless steel buckle (knockdown)

Tensioner Stainless steel band tensioning tool for 12mm and 19mm strap

7.2kg

Code

Description

R/PIN-1

Replacement Coil Retaining Pin

PDWHE

Wheel Start Cap for PD40 & CSM20

Brake Belts Code

Description

BLT406

Brake Belt for PTD406 & MW60

Box Qty: 100

0.95

SBK16 16mm x stainless steel buckle (knockdown) SBK19 19mm x stainless steel buckle (knockdown)

1.50

1.8kg

SSB Sassband

RMR

Code Description SSB12 12mm x 30 mtr stainless steel band

8oz Ball Pein Hammer

SSB16 16mm x 30 mtr stainless steel band

Hammer

SSB19 19mm x 30 mtr stainless steel band 0.4kg Stainless steel strapping Grade 201 x 0.726mm

2.30

3.50

nd her a weat high sistance ns ly e m re tio Extrecorrosion f applica , o ge range signa Wideincluding tion and ruc conststallation in

STRAPPING PRODUCTS & CONSUMABLES

79

STRAPPING PRODUCTS & CONSUMABLES

Strapping Dispensers & Stainless Steel Strapping

One of the most comprehensive ranges of strapping buckles and seals available on the market

Strapping Buckles and Seals Strapping Buckles le buck -grip High rface r su athe er we High istance res

High Performance Sheradised Metal Buckles - for Woven and Hotmelt Polyester Strapping

Code Description

Wire thickness

CB4S 13mm Optigrip Sheradised Buckles

3mm ø

1000/box

9.85

CB5S 16mm Optigrip Sheradised Buckles

3.5mm ø

1000/box

11.75

CB6S 19mm Optigrip Sheradised Buckles

3.8mm ø

1000/box

16.90

CB8S 25mm Optigrip Sheradised Buckles

5mm ø

400/box

14.55

CB10S 35mm Optigrip Sheradised Buckles

7mm ø

250/Box

22.75

The sheradised coating on our Optigrip high performance buckles provides the best grip, preventing strap slippage and higher weather resistance

galvex Strapping Buckles ed on P be us Can rades of P g e som rapping st

Galvanised Buckles for Polyprop and Composite Strapping

Code Description

Wire thickness

CB4G 13mm Galvex-Galvanised Buckles

3mm ø

1000/box

8.00

CB5G 16mm Galvex-Galvanised Buckles

3.5mm ø

1000/box

11.90

CB6G 19mm Galvex-Galvanised Buckles

3.8mm ø

1000/box

16.40

CB8G 25mm Galvex-Galvanised Buckles

5mm ø

500/box

14.55

CB10G 35mm Galvex-Galvanised Buckles

7mm ø

250/box

22.75

Our Galvex range is recommended for use with polyprop and composite polyester strapping.

Strapping Buckles Plastic Buckles for Polyprop Strapping

Code

Description

1-9000

10,000+

50,000+

PB12W

12mm White Plastic Buckles

1000/box

£7.92/Box

£7.29/Box

£6.94/Box

2.25

PB12BK

12mm Black Plastic Buckles

1000/box

£8.18/Box

£7.40/Box

£7.27/Box

2.25

PB12W-HD 12mm White Heavy Duty Plastic Buckles

1000/box

£10.52/Box

£9.92/Box

£9.20/Box

2.25

Strapping Seals

For polypropylene & polyester strapping

SC12 12 x 25 x 0.5mm Closed Seal 2000/Box

SO1632 7.3kg /case

SO10 10 x 25m x 0.5mm Semi Open Seals 2000/Box

4.95kg /case

7.9kg /case

80

13 x 33 x 0.6mm Magazine 2500/Box

12.9kg /case

12 x 33 x 0.8mm Magazine Seals 2500/Box

16.3kg /case

HMAG16 6.35kg /case

16 x 33 x 0.8mm Magazine Seals 2500/Box

19.85kg /case

For use with TLN Combination Tool only

TLN13S 13mm TLN Seals for use with TLN Tool 3000/Box

4.24kg /case

TLN16S 16mm TLN Seals for use with TLN Tool 3000/Box

4.65kg /case

TLN19S

SO1232 12 x 32 x 0.6mm Semi Open Seals 2000/Box

9.75kg /case

HMAG12

SO34 12 x 25 x 0.5mm Semi Open Seals 2000/Box

16 x 32 x 0.6mm Semi Open Seals 2000/Box

PMAG12

SO16 16 x 25 x 0.5mm Semi Open Seals 2000/Box

Strapping Seals

8.5kg /case

STRAPPING PRODUCTS & CONSUMABLES

19mm TLN Seals for use with TLN Tool 3000/Box

5.70kg /case

For steel strapping

Safeguard strapping seals offer ultimate levels of seal quality and represent the pinnacle in seal performance

Upgrade to

der d lea seal l r o W ing rapp in st uality q

Through the strictest quality control and by using the finest materials available, Safeguard Seals are manufactured to the highest standards. This attention to detail has resulted in Safeguard Seals being able to offer the ultimate in seal integrity. Upgrade to Safeguard now for the very best in seal performance and peace of mind.

For Polypropylene and Polyester Strapping Safeguard

Safeguard

Safeguard

SER12-SG

SER16-SG

SO1232-SG

12 x 30mm Serrated Seals 1000/Box Equivalent to KONRAD

6.4kg

16 x 30mm Serrated Seals 1000/Box Equivalent to KONRAD

9.6kg

12 x 32 x 0.6mm Semi Open Seals 1000/Box

Safeguard

Safeguard

Safeguard

SO16-SG

SO1632-SG

SO34-SG

16 x 25 x 0.5mm Semi Open Seals 1000/Box

5.5kg

16 x 32 x 0.6mm Semi Open Seals 1000/Box

4.7kg

12 x 25 x 0.5mm Semi Open Seals 1000/Box

Safeguard

Safeguard

Safeguard

SER19-SG

38.AL.R-SG

58-AMTG-SG

19 x 31 x 0.8mm Serrated Seals 1000/Box

9.6kg

Magazine Seals for AL38 steel magazine strapping tool 7000/Box

10kg

Magazine Seals for AMT polyester magazine strapping tool 1800/Box

STRAPPING PRODUCTS & CONSUMABLES

4.5kg

4.5kg

19.2kg

81

STRAPPING PRODUCTS & CONSUMABLES

Safeguard Strapping Seals

Only after passing stringent quality control checks are seals deemed to have met the Safeguard standard

Safeguard Strapping Seals

Other magazine seals available on request

For Polyprop and Polyester Strapping Safeguard

Safeguard

Safeguard

12.AL.R-SG

58/34AMP.R-SG

12AMP.R-SG

Magazine Seals for AL12 steel magazine strapping tool 10500/Box

16.5kg

Magazine Seals for AMP58/34 and AM58/34 steel magazine strapping tool 6000/Box

20.5kg

Magazine Seals for AM12 and AMP12 steel magazine strapping tool 7000/Box

20kg

For Steel Strapping 8.8kg

USE WIH SRD & SAS SEALERS

13 x 25 x 0.7mm Lap Over Seal 2000/Box

10.7kg

16 x 25 x 0.7mm Lap Over Seal 2000/Box

12.3kg

19 x 25 x 0.7mm Lap Over Seal 2000/Box

Safeguard

Standard

Safeguard

Standard

Safeguard

Standard

LAP13-SG

LAP13

LAP16-SG

LAP16

LAP19-SG

LAP19

USE WIH SAS & DNSAS SEALERS

Safeguard

Safeguard

Safeguard

LAP1957-SG

LAP25-SG

LAP32-SG

USE WIH TS & DNS SEALERS

13 x 25 x 0.5mm Snap on Seal 2000/Box

22.5kg

19 x 57 x 0.7 Lap Over Seal 1000/Box

25kg

25 x 57 x 0.9mm Lap Over Seal 1000/Box

5.5kg

30kg

32 x 57 x 0.9mm Lap Over Seal 1000/Box

6.4kg

16 x 25 x 0.5mm Snap on Seal 2000/Box

7.2kg

19 x 25 x 0.5mm Snap on Seal 2000/Box

Safeguard

Standard

Safeguard

Standard

Safeguard

Standard

SOS13-SG

SOS13

SOS16-SG

SOS16

SOS19-SG

SOS19

82

STRAPPING PRODUCTS & CONSUMABLES

The Plaztek range of edge and corner protectors provides added strapping load protection

Edge and Corner Protectors

Code

Description

CPS

Small embossed plastic edge protectors 28 x 25mm

2000/box

CPS-E

Small Embossed Plastic Edge Protectors

2000/box

CPL

Large plastic edge protectors 37mm x 32mm

1000/box

CPL-SPIKE Large plastic edge protectors with spike 37 x 32mm

2000/box

CPL-X

Super large plastic corner pieces 48mm x 42mm

1000/box

CPX

Extra large plastic edge protectors 57mm x 48mm

1000/box

CPS Usable width 19mm CPL Usable width 30mm CPX Usable width 50mm

6.75

tive effec st & cartons o -c Low tion of p c a prote ainst str ag ge a m da

4.20 CPX large edge protectors

5.05

CPRO corner protectors

CPS small edge protectors

CPL large edge protectors

Expanding Corner Protectors izetile s Versa ble profile a t adjus otection pr

Code

Description

EXMCP

Medium expandable corner protectors to suit 16 - 40mm

1000/box

7.45

EXLCP

Large expandable corner protectors to suit 35 - 70mm

250/box

6.30

Open Corner Protectors

Code

Description

CPRO-1

60mm x 60mm x 28mm

1000/box

8.20

Closed Corner Protectors

Code

Description

CCP15

60mm x 60mm x 15mm

1000/box

8.20

CCP18

60mm x 60mm x 18mm

1000/box

8.20

CCP22

60mm x 60mm x 22mm

850/box

8.20

CCP28

60mm x 60mm x 28mm

700/box

8.20

HDRC28

60mm x 60mm x 28mm H.D. 800/box

HDRC40

60mm x 60mm x 40mm H.D. 600/box

15mm

18mm

r orne d um c o Optimion for wo ct ed prote laminat and ducts pro

22mm

28mm

HDRC40

Pro-Tex Snap-Off Edge Protectors Code

Description

Qty/Roll

PRO-TEX

38mm x 66mm

550

STRAPPING PRODUCTS & CONSUMABLES

83

STRAPPING PRODUCTS & CONSUMABLES

Edge Protectors

Choose from our large range of ribbon and mill wound steel strapping

Steel Strapping Ribbon Wound Steel Strapping

elling S t s Be nes Li

l r coi Lowe ght wei sy a for e ling d han

What is Ribbon Wound? Each layer is wound directly over the one below it so that the width of the strapping is the width of the coil. (Coil weights are approximate).

Extended Range Vast Stock Holding Premium Quality

Code

Size

Type

Av Coil Weight

Coil Length

Breaking Coils/ Pallet Strain

RW13 RW16 RW19 RW19Z RW19-06 RW25 RW32 RW32Z RWS13 RWS16 RWS19

13mm x .5 16mm x .5 19mm x .5 19mm x .5 19mm x .6 25mm x .8 32mm x .8 32mm x .8 13mm x .5 16mm x .5 19mm x .5

Black Black Black Zinc Coated Black Black Black Zinc Coated Black Black Black

20Kg 25Kg 30Kg 30Kg 30Kg 41Kg 48Kg 48Kg 16.5Kg 21Kg 24Kg

395 Mtr 395 Mtr 395 Mtr 395 Mtr 336 Mtr 258 Mtr 240 Mtr 240 Mtr 326 Mtr 332 Mtr 316 Mtr

560Kg 720Kg 850Kg 850Kg 1000Kg 1700Kg 2040Kg 2040Kg 560Kg 720Kg 850Kg

31 25 21 21 21 18 22 22 36 30 25

20.0 25.0 30.0 30.0 30.0 41.0 48.0 48.0 16.5 21.0 24.0 Zinc Coated Steel Reel

Ribbon Wound Short Reel

Mill Wound Steel Strapping (Oscillation Wound)

What is Mill Wound? Mill wound strapping is a larger coil than ribbon wound. The strapping is oscillated uniformly and tightly across the 63.5 mm (2 1/2”) width of the core. (Coil weights are approximate).

Extended Range Vast Stock Holding Premium Quality

Code

Size

Type

Av Coil Weight

Coil Length

Breaking Coils/ Pallet Strain

MW13 MW13Z MW16 MW16Z MW19 MW19Z MW19-06 MW19-06Z

13mm x .5 13mm x .5 16mm x .5 16mm x .5 19mm x .5 19mm x .5 19mm x .6 19mm x .6

Black Zinc Coated Black Zinc Coated Black Zinc Coated Black Zinc Coated

50Kg 50Kg 50Kg 50Kg 50Kg 50Kg 50Kg 50Kg

1010 Mtr 1010 Mtr 800 Mtr 800 Mtr 675 Mtr 675 Mtr 560 Mtr 560 Mtr

570Kg 570Kg 730Kg 730Kg 870Kg 870Kg 1000Kg 1000Kg

84

STRAPPING PRODUCTS & CONSUMABLES

12 12 12 12 12 12 12 12

50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

coil High ty for ci capa uced d e r time down

Whatever the strapping application, we offer one of the widest ranges of polypropylene strapping on the market

Polypropylene Hand Strapping

Code

Width Thickness Length

TT40BLK TT40W TT5078BLK TT45BLK TT50BLK TT50W TT4470BLK TT505BLK TT512BLU TT5076BLK TT55BLK TT55BLU TT55Y TT60BLK TT65BLK TT70BLK TT70W CC1240WH CC1245WH CC1245BLK-150 CC12467BLK CC1250WH CC1255WH CC1650BLU

12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 15mm 15mm 16mm 16mm 12mm 12mm 12mm 12mm 12mm 12mm 16mm

.55 .55 .8 .7 .8 .8 .63 .8 .8 .76 .9 .9 .9 .75 .85 .96 .96 .55 .7 .7 .8 .8 .9 .8

2,000Mtr 2,000Mtr 1,200Mtr 1,500Mtr 1,300Mtr 1300Mtr 1,800Mtr 1,000Mtr 1,200Mtr 1,400Mtr 1,000Mtr 1,000Mtr 1,000Mtr 1,200Mtr 1,000Mtr 750Mtr 750Mtr 2,000Mtr 1,300Mtr 1,500Mtr 1,000Mtr 1,300Mtr 1,000Mtr 800Mtr

PP strap grades can be mixed to achieve volume rates Hand strap packed 1 coil per box

Colour

Breaking Strain

Coils/ Pallet

Core

Black White Black Black Black White Black Black Blue Black Black Blue Yellow Black Black Black White White White Black Black White White Blue

145 Kilo 145 Kilo 220 Kilo 185 Kilo 220 Kilo 220 Kilo 175 Kilo 260 Kilo 270 Kilo 205 Kilo 300 Kilo 300 Kilo 300 Kilo 250 Kilo 300 Kilo 420 Kilo 420 Kilo 130 Kilo 185 Kilo 185 Kilo 220 Kilo 220 Kilo 300 Kilo 350 Kilo

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 48 48 48 48 48 48 48

Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel 200 x 150 200 x 150 200 x 150 200 x 150 200 x 150 200 x 150 200 x 150

7.80 8.40 7.90 7.35 7.35 7.35 8.55 7.10 8.10 7.80 7.80 7.80 7.75 7.50 8.70

PD40

7.10 6.00 6.00 7.85 7.10 8.00

PMC80

Polypropylene Machine Strapping Code

Width

Thickness

Length

Colour

Breaking Strain

Coils/ Pallet

Core

MS540BLU MS540W MS6W MS7W MS7BLU MS1537W MS15W MS15BLU MS2084W MS20W MS5033W MS30W MS35W MS4027W MS40W MS40BLK MS45BLU MS50BLU MS50BK-HE MS50W MS55BLK MS127BLK MS128BLK MS60BLU MS60Y MS840BLU* MSP1208BLU* MSP1275BLK

5mm 5mm 6mm 7mm 7mm 9mm 9mm 9mm 9mm 9mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm 12mm

.4 .4 .55 .63 .63 .55 .55 .55 .60 .63 .63 .63 .55 .55 .55 .55 .55 .63 .63 .63 .80 .70 .80 .85 .85 .80 .80 .75

6,500Mtr 6.500Mtr 5,000Mtr 5,000Mtr 5,000Mtr 3,700Mtr 4,000Mtr 4,000Mtr 3,300Mtr 4,000Mtr 2,500Mtr 2,500Mtr 2,500Mtr 2,700Mtr 3,000Mtr 3,000Mtr 3,000Mtr 3,000Mtr 3,000Mtr 3,000Mtr 1,500Mtr 2,200Mtr 2,000Mtr 2,000Mtr 2,000Mtr 1,500Mtr 2,000Mtr 1,600Mtr

Blue White White White Blue White White Blue White White White White White White White Black Blue Blue Black White Black Black Black Blue Yellow Blue Blue Black

60 Kilo 60 Kilo 80 Kilo 100 Kilo 100 Kilo 100 Kilo 110 Kilo 110 Kilo 110 Kilo 140 Kilo 150 Kilo 170 Kilo 145 Kilo 135 Kilo 145 Kilo 145 Kilo 145 Kilo 170 Kilo 165 Kilo 170 Kilo 260 Kilo 190 Kilo 270 Kilo 260 Kilo 270 Kilo 230 Kilo 230 Kilo 240 kilo

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 48 48 48 60

200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 280 x 190 280 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 200 x 190 406 x 150 406 x 150 406 x 150 280 x 190

18.0 18.0 19.2 24.5 24.5 20.45 21.4 21.4 20.3 23.3 18.8 18.8 17.7 19.2 19.8 19.8 19.8 23.2

PP strap grades can be mixed to achieve volume rates Machine strap packed 2 coils per box *Packed 1/Box

23.2 23.7 24.3 10.9 13.45 9.2

STRAPPING PRODUCTS & CONSUMABLES

85

STRAPPING PRODUCTS & CONSUMABLES

Polypropylene Hand and Machine Strapping

Trimax Polyester strapping, the strong, safe alternative to steel strapping

Polyester Strapping & Twine Trimax Polyester Strapping

Code

Thickness

Length

Colour

Breaking Strain

Core

10.8mm 11.1mm 12mm 12.5mm 12.5mm 12mm 12mm 15.5mm 15.5mm 15.5mm 15.5mm 15.5mm 15.5mm 15.5mm 19mm 19mm 19mm

x .75 x .52 x .5 x .6 x .7 x .85 x 1.1 x .6 x .7 x .7 x .85 x .85 x .9 x 1.1 x .8 x 1.0 x 1.0

2,300mtr 3,200mtr 3,000mtr 2,500mtr 2,000mtr 1,800mtr 1,300mtr 2,000mtr 1,750mtr 1,750mtr 1,500mtr 1,500mtr 1,500mtr 1,000mtr 1,200mtr 1,000mtr 1,000mtr

Green Embossed Green Smooth Green Embossed Green Embossed Green Embossed Green Embossed Green Embossed Green Embossed Green Embossed Green Smooth Green Embossed Black Embossed Green Embossed Green Embossed Green Embossed Green Smooth Green Embossed

310 Kilo 225 Kilo 255 Kilo 270 Kilo 350 Kilo 360 Kilo 420 Kilo 410 Kilo 440 Kilo 440 Kilo 550 Kilo 550 Kilo 560 Kilo 720 Kilo 660 Kilo 850 Kilo 820 Kilo

406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150 406 x 150

12.5mm 12.5mm 12.5mm 12mm 15.5mm 16mm

x .55 x .55 x .55 x .8 x .7 x .9

1,250mtr 1,600mtr 1,600mtr 1,000mtr 1,200mtr 750mtr

Green Embossed Green Embossed Black Embossed Black Embossed Green Embossed Black Embossed

270 Kilo 270 Kilo 270 Kilo 390 Kilo 440 Kilo 580 Kilo

Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel Plastic Reel

135 Kilo 180 Kilo 225 Kilo 270 Kilo 225 Kilo

200 x 190 406 x 150 406 x 150 406 x 150 200 x 190

Width

On cardboard core PT1175G ST1617 PT1253G PT20G PT30G PT35G PT2252-1.1T PT1560G PT40G PT40G-S 02PET158 BKPET158 PT50G PT60G PT70G PT90G PT90G-E

24.1 20.15 22.35 21.5 21.2 22.6 23.7 PTD406 19.4 22.3 22.7 24.7 21.6 23.75

On plastic reel PTR1250G PTR25G PTR25BLK PTR30BLK PTR45G PTR50BLK

16.38 16.9 16.8 16.4

PD40

Hylastic High Performance, Smooth Polyester Strapping HYS654 HY714 HY716 HY718 HYS716

9mm 11.1mm 10.8mm 11.1mm 10.8mm

x .46 x .51 x .63 x .76 x .63

3,430mtr 3,200mtr 2,438mtr 2,134mtr 2,040mtr

Black Smooth Black Smooth Black Smooth Black Smooth Black Smooth

18.2 17.4 17.3 PTD406 13.1

PP Twine, Sisal String & Cotton String PT3

PT4

PT6

PT8

S2PLY

Code

Type

Size

Qty/ case

Breaking Strain

PT3 PT4 PT6 PT8 S2PLY S3PLY FCS125 FCS250 FCS500

PP Twine PP Twine PP Twine PP Twine Sisal Twine 2 ply Sisal Twine 3 ply Cotton String Cotton String Cotton String

2.25kg Ball x 700mtr/kg 2.25kg Ball x 450mtr/kg 4.5kg Ball x 280mtr/kg 4.5kg Ball x 170mtr/kg 2.5kg Ball x 300mtr/kg 2.5kg Ball x 200mtr/kg 125g (150m) Ball 250g (130m) Ball 500g (130m) Ball

8/Case 8/Case 4/Case 4/Case 10/Case 10/Case 12/Case 6/Case 6/Case

50kg 80kg 125kg 205kg 54kg 82kg 8Kg 18Kg 29Kg

86

STRAPPING PRODUCTS & CONSUMABLES

18.1 18.1 18.1 18.1 25.0 25.0

We stock a wide variety of woven, composite and hotmelt polyester strapping

Pallet Probe & Polyester Strapping Hotmelt Cord Polyester Strapping

Suitable for PP/Polyester/Steel strapping up to 19mm wide. Overall length 1400mm.

Non-woven. Monofilament

Code

Description

PALP1

Pallet probe

0.7kg

The quick and easy method for feeding strap under pallets

Woven Cord Polyester Strapping ium Prem lyester o p e d gra apping r t s

78mm core. For details on system strength please contact sales B/S: Linear Brake Strength S/S: System Strength

ate Ultim h at t g n stre um optim e pric

78mm core. For details on system strength please contact sales B/S: Linear Brake Strength S/S: System Strength

CSM20

Width x Length

B/S

S/S

Coils /ctn

WPH40 WPH50 WPH55 WPH60 WPH65 WPH75 WPH85 WPH95 WPH105

13mm x 1100mtr 16mm x 850mtr 16mm x 600mtr 19mm x 600mtr 19mm x 500mtr 19mm x 500mtr 25mm x 500mtr 32mm x 300mtr 38mm x 100mtr

375Kg 450kg 600Kg 550Kg 725Kg 1100Kg 950Kg 1500Kg 2000Kg

638Kg 765kg 1020Kg 935Kg 1235Kg 1870Kg 1615Kg 2550Kg 3400Kg

2 2 2 2 2 2 2 2 4

18.1 18.1 18.1 18.1 25.0 25.0

CSM20

Width x Length

Code

Code

STRAPPING PRODUCTS & CONSUMABLES

Pallet Probe

HMP40 13mm x 1100mtr HMP1315 13mm x 1500mtr HMP45 13mm x 750mtr HMP50 16mm x 850mtr HMP55 16mm x 600mtr HMP60 19mm x 600mtr HMP1612 16mm x 1200mtr HMP65 19mm x 500mtr HMP85 25mm x 500mtr

B/S

S/S

375Kg 375Kg 510Kg 450Kg 633Kg 550Kg 450Kg 725Kg 1000Kg

638Kg 638Kg 867Kg 765Kg

Coils /ctn 6.95 9.0 6.5 6.3

2 2 2 2 2 935Kg 2 765Kg 2 1232Kg 2 2

5.65 8.9 6.55

Bale Press Strapping uter ced o Redu meter to ia s coil d le Presse B fit a

Composite Polyester Strapping Plastic coated cord polyester

60mm x 160mm core. Coil ø mm WP30 PB: 160 WP40 PB: 180 WP50 PB: 210

n use o ct for rodu surfaces p t s Be sive for abra rigidity er ed High r strap fe easie gh pallet u ro th

Code

Width x Length

Coils /ctn

B/S

WP30PB 9mm x 500mtr 280Kg WP40PB 13mm x 500mtr 375Kg WP50PB 16mm x 425mtr 450Kg

3.0 3.0 3.5

4 4 4

Softex Woven Cord Poly Strapping 200mm x 190mm core. (*CPS105 406mm x 150mm core) Use with Galvex Buckles For details on system strength please contact sales B/S: Linear Brake Strength S/S: System Strength

PMC80

Code

Width x Length

B/S

S/S

Coils /ctn

CPS40 CPS50 CPS60 CPS65 CPS85 CPS105*

13mm x 1100mtr 16mm x 850mtr 19mm x 700mtr 19mm x 650mtr 25mm x 500mtr 34mm x 400mtr

290Kg 410Kg 450Kg 550Kg 785Kg 1400Kg

493Kg 697Kg 765Kg 935Kg 1335Kg 2380Kg

2 2 2 2 2 1

een has b who pping ers x stra r custom flexible e ft o S fo d more uced and n introd a softer a dard WP rial e an te requir p to our st oftex ma m S . m 6 stra range na7 WPH pplied o . is su core

10.5 11.2 10.65 9.0 11.45 18.2

B/S: Linear Brake Strength S/S: System Strength

Code

Width x Length

SWP55 SWP65

16mm x 600mtr 620Kg 19mm x 500mtr 740Kg

B/S

S/S

CSM20

Coils /ctn

1054Kg 2 1258Kg 2

STRAPPING PRODUCTS & CONSUMABLES

7.50 7.70

87

®

World class strapping machines designed for reliable operation in industrial environments

Semi Automatic Strapping Machines Optimax®

The TMS300 is a reliable semi automatic strapping machine. Simple to operate - feed the strapping around the package and the machine automatically tensions and heat seals the strap.

TMS300

Accepts PP machine strapping from 6mm - 16mm wide on 200mm or 280mm cores. Designed to provide a quick and efficient method of strapping single or multiple packages of varying sizes.

semi automatic strapping machine

The machine features external tension control, a safety cut-out switch when the top is opened and an enclosed cabinet design keeps that strapping clean and dust free.

®

External tension control

Reliable control head

Simple control panel

r pula d po n a en on erati -prov Well mple op osed l c Si en d Fully nism an a h c e m coil

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

specifications model name dimensions tension strap width strapping speed power supply power consumption

100kg

TMS 300 semi automatic strapping machine 920mm width x 595mm depth x 785mm height 15-45kgs 6mm - 15.5mm 2.5 seconds / cycle (60Hz) 230v / 50Hz 0.3kw

The XCS550 is the new generation semi automatic strapping machine. Simple to operate - feed the strapping around the package and the machine automatically tensions and heat seal the strap.

Optimax®

XCS550

Designed to provide a quick and efficient method of strapping single or multiple packages of various sizes, the main features of the XCS550 include the 24v low voltage electric system for added safety; quiet, compact mechanical control head - for easy maintenance and electronic tension control for easy and efficient operation.

semi automatic strapping machine ®

®

External tension control

Quiet, compact Adjustable table mechanical control head height

led ntrol or-co lade s n e S ight er b heat table he e e iv l ct-dr stab Adju ique dire sm Un echani m 75kg

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

88

STRAPPING PRODUCTS & CONSUMABLES

specifications model name dimensions tension strap width strapping speed power supply power consumption

XCS550 semi automatic strapping machine 850mm width x 560mm depth x 780-950mm height 8-45kgs 5mm - 13mm 2.5 seconds / cycle (60Hz) 230v / 50Hz 0.3kw

®

Optimum quality, maximum reliability for when only the very best products will do

Semi Automatic Strapping Machines TAS200

TAS200 is an affordable, portable, and compact semi-auto strapping machine, designed for general purpose use..

semi automatic strapping machine

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

odel ory m , duct Intro ffordable d A n ble a relia ible flex

®

85kg

Simple control panel

Reliable control head

specifications model name dimensions tension strap width strapping speed power supply power consumption

TAS200 semi automatic strapping machine 982mm width x 586mm depth x 760mm height 15-45kgs 6mm - 15.5mm 2.5 seconds / cycle (60Hz) 230v / 50Hz 0.25kw

Optimax®

AS400 stainless steel side seal semi automatic strapping machine

The AS400 is based on the reliable TMS300 machine design, manufactured in a stainless steel cabinet with a side sealing function for applications such as marine and horticultural environments or timber yards, where water or debris from the pack would cause damage or corrosion to the mechanism of a standard semi automatic strapping machine.

®

The AS400 is supplied with stainless steel press bar. Front and rear bar for maximum reliability.

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

Adjustable table height

Simple control panel

Side sealing mechanism 125kg

ction nstru icultural t el co s ste sing, hor nts s le e ain es All st ood proc environm of strap f sive side l for Idea and corro oused to ress of h s ing ids anism vent u Mech able - pre s and liq t le partic

specifications model name dimensions tension strap width strapping speed power supply power consumption

AS400 stainless steel side seal semi auto machine 675mm width x 1045mm depth x 1625mm height 15-45kgs 6mm - 15.5mm 2.5 seconds / cycle (60Hz) 230v / 50Hz 0.25kw

Optimax®

PLR100

The PLR100 is a reliable, semi-automatic strapping machine based on the popular TMS300 design but with a low-level table top height designed for heavy export packs and large packages.

low level semi automatic strapping machine ®

Reliable control head

Low level design

Simple control panel

Simple to operate, feed the strapping around the package and the machine will automatically tension and heat seal the strap.

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

ht heig r o table Low for large n l idea vy carto a he ping strap

80kg

specifications model name dimensions tension strap width strapping speed power supply power consumption

PLR100 low level semi automatic strapping machine 1476mm width x 582mm depth x 355mm height 15-45kgs 6mm - 15.5mm 2.5 seconds / cycle (60Hz) 230v / 50Hz 0.25kw

STRAPPING PRODUCTS & CONSUMABLES

89

STRAPPING PRODUCTS & CONSUMABLES

Optimax®

®

Optimax® automatic strapping machines offer fast, accurate and consistent strapping

Automatic Strapping Machines The TRS600 Automatic machine is designed for strapping high volumes of cartons and packages. Simply place the pack under the arch; at the press of a button the machine automatically straps the pack.

Optimax®

TRS600 automatic strapping machine

The TRS600 is capable of up to 27 straps per minute providing an efficient solution to your strapping needs. The main features are external tension control to suit pack application and a short feed sensor to prevent misfeeds. A range of arch sizes are available to suit your application.

®

TRS600 PRODUCT CODES: TRS600-12: 850 x 600mm arch

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

TRS600-12L: 1050 x 800mm arch

Special arch sizes are available on request Manual external control adjusts strap tension by simply turning a dial

3 methods of activation - foot pedal, console button and ball switch

Reliable control head

matic l auto e v le Entry strapper ol head contr able e options li e r y siz Ver arch 1 specifications Two

220kg

model name dimensions tension strap width strapping speed power supply power consumption

Optimax®

AFS900 EVOLVE automatic strapping machine ®

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

The AFS900 Evolve automatic strapping machine is one of the most advanced in its class. Based on the TRS600 design and incorporating features such as auto feed for easy strap loading, short feed sensor and auto re-insertion, electronic tension control for quick and simple tension adjustment and auto loop ejector to eliminate down time. AFS900 PRODUCT CODES: AFS900-9: 850 x 600mm arch, 9mm strap width AFS900-12: 850 x 600mm arch, 12mm strap width AFS900-12L: 1050 x 800mm arch, 12mm strap width

Electronic tension control Special arch sizes are available on request

TRS 600 automatic strapping machine 1430mm width x 620mm depth x 1540mm height 10-70kgs 9mm - 12mm - 15.5mm 2.2 seconds / cycle (60Hz) 230v / 50Hz 1.2kw

Loop ejector clears unwanted strap automatically

Auto strap feed inserts the strap with no access to the inside of the machine required

n ensio nic t o r t c l Ele contro g edin ap fe ctor r t s Auto loop eje Auto 220kg

specifications model name dimensions tension strap width strapping speed power supply power consumption

90

STRAPPING PRODUCTS & CONSUMABLES

AFS900 EVOLVE automatic strapping machine 1430mm width x 620mm depth x 1540mm height 10-70kgs 9mm - 12mm - 15.5mm 2.2 seconds / cycle (60Hz) 230v / 50Hz 1.2kw

®

All Optimax® automatic strapping machines feature the very latest strapping technology

Automatic Strapping Machines HQS80-15 FASTRAC high speed automatic strapping machine

Fast Track HQS80-15 is an innovative, world class, high speed automatic strapping machine. It is equipped with all industry-standard and additional operator-friendly features. The HQS80-15 currently offers the best performance, highest speed, easiest maintenances and most cost-effective solution in its class. Available for 5mm, 6mm, 9mm and 12mm strap sizes and in a variety of arch sizes. Prices on request.

®

Engineered and developed in Europe, the HQS80-15 is capable of up to 65 cycles per minute and is designed for users such as print finishers, corrugated industry, news printers and applications where efficiency is paramount. Features such as the one-piece strap chute, auto strap ejector, centre control heater, adjustable table height, integral front foot bar switch and waist height, front foot bar switch and waist-height auto strap feed are found on the HQS80-15 Fastrac machine. INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

Ergonomic, operator-friendly waist high auto strap feed

Special arch sizes are available on request

Robust & compact mechanical strapping head

Free access to strap guides

Waist high quick coil change

Auto strap ejector

Adjustable table height

Ergonomic Cycle Initiation The operating control panel is located on upper side of the machine for easy access. The power cord is also located at the top of the arch to avoid damage when moving the machine. Front foot bar switch. Ergonomic design and user-friendly.

160kg

min cles/ to y c 5 au o6 Up t t height s d i e a e f W strap peration o r se ba Foot ease of u for

up to

Speed

65

straps per minute

specifications model name dimensions

tension strap width strapping speed power supply

HQS80/1-5 Fastrac high speed automatic strapping machine 5 - 9mm machine, 1452mm high x 652mm depth x width depends on size of arch 12mm machine, 1525mm high x 652mm depth x width depends on size of arch 5 - 9mm, 1 - 35kg 12mm, 1 - 45kg 5mm - 6mm - 9mm - 12mm 65 straps per minute 230v, 50/60Hz, 1 phase

Exciting New Sales Opportunities for Optimax® Distributors! The Optimax® Strapping Machines range has been significantly extended, to include equipment designed for heavy duty, high speed and specialist applications. ®

Each model is designed and manufactured consistent with the exacting standards demanded of all products that bear the Optimax brand. The full range has now been compiled in a separate, unpriced brochure and accompanies this catalogue.

STRAPPING PRODUCTS & CONSUMABLES

91

STRAPPING PRODUCTS & CONSUMABLES

Optimax®

®

Optimax® automatic strapping machines are perfect for high volume strapping operations

Automatic Strapping Machines Optimax®

PS500 semi-auto pallet strapping machine forvertical applications

The PS500 mobile pallet strapping machine > eliminates the use of manual tools and strap dispenser > can easily be moved to any strapping location > provides ergonomic and cost-effective low-volume vertical pallet strapping Main Features > Suitable for a wide range of applications, from corrugated carton packs to concrete blocks > Lightweight and compact for easy manoeuvrability > Can strap low pallet loads down to 280 mm total height > User-friendly and effective strap feeding mechanism > Weld cooling time can be extended to ensure optimum weld efficiency

®

ping strap ised put and im t p h to ug Palle ses thro cy a a ien incre effic tion from n era ed desig p o g ble Relia ble & rug ficiency f ta repu h joint e ig H

INCLUDES 12 MONTH PARTS OR RETURN TO BASE WARRANTY

Control panel The controls are simple to use and ergonomically located on the upper machine panel.

Feed switch The strap feed switch is handily located above the coil holder for added ease of operation.

Optimax®

PS500B battery powered semi-auto pallet strapping machine

en rs ev Offe ater gre lity bi flexi 90kg

specifications model name dimensions tension strap width power supply

PS500 semi-auto pallet strapping machine for vertical applications 1002mm high x 696mm width x 534mm depth 15 - 55kg 9mm - 15.5mm 230v, 50/60Hz, 1 phase

AX30 automatic banding machine ing band ets r o f ct ick Perfek notes, t ted n i n r ba any p l or ateria m

The AX30 banding machine features: > 300mm x 200mm arch > Compact, desktop design. > Can use both 30mm paper and plastic tapes. > Automatic strapping. > Microprocessor pre-programmed for easy operation. > 3 positions of tension control. > Start Modes: (A)Auto Start (B)Start Button (C)Foot Switch.

specifications model name strap speed strap capacity strap width power supply

AX30 auto banding machine 18-20 cycles/min. 300mm(W) x 200mm(H) 30mm, 40mm, 50mm 220V 50/60Hz.

Looking for Plastic Pallets? They are now on page 64 92

STRAPPING PRODUCTS & CONSUMABLES

banding tapes Code Size Material AXT3150PA 30mm x 150mtr Paper AXT3150PL 30mm x 150mtr Plastic

packing room equipment > > > >

Pacplan Technik Packing Stations Pacplan Ergoline Packing Stations Pacplan Anti-Fatigue Mats & Roll Product Dispensers Kinetix Work Station Stapling Utility & Safety Knives Janitorial

94 96

PACKING ROOM EQUIPMENT

> > >

97 98 99 104 106

PACKING ROOM EQUIPMENT

93

Create your own work station tailored to your exact requirements

Pacplan Technik Packing Stations

Bespoke Pack Stations Whatever your application and specification our designers and engineers will create a workstation solution that perfectly suits your brief. Working closely with our distributors, we have created a wide variety of solutions for some of the UK’s largest fulfillment centres. Our team can provide distributors with complete work station survey, design, construction and installation services and are on hand to provide complete distributor support as required.

94

PACKING ROOM EQUIPMENT

Complete packing operation solutions, from single stations to national fulfilment centre fit-outs

Designed and built to maximise your packing operations productivity

Pacplan Technik Packing Stations Pacplan Technik has become one of the most respected names in the design and manufacture of workstation systems for the packaging, despatch and fulfillment centre industries.

PACKING ROOM EQUIPMENT

By carefully listening to our customers’ specific requirements, we are able to create individual solutions to suit their needs. This ensures our customers maximise the efficiency and productivity of their packing operations, designed around the dimensions and configuration of their available floor space.

Consider the following features... BESPOKE SOLUTION Computer-designed, bespoke solutions to specific requirements ranging from single bench units to fully integrated fulfilment centre fit-out. Powder coated units can be colourmatched to customer requirements and a wide range of work surfaces is available for varying applications.

MAXIMISE OUTPUT Maximised operational productivity through more efficient workflow patterns designed around 5S and Lean methodology.

HEAVY DUTY Constructed to the highest standards from 30 x 30mm or 40 x 40mm heavy duty steel profiles with fully-welded joints and durable 18mm laminate worktops as standard.

ERGONOMIC DESIGN Designed to create a comfortable working environment with reduced risk of operator fatigue and repetitive strain injury.

INDUSTRY PROVEN Installed in major national fulfilment centres and supporting the growth of this rapidly increasing sector.

We have considerable expertise in creating bespoke, turnkey workstations for a variety of despatch applications. Call our sales team to discuss all your workstation projects. PACKING ROOM EQUIPMENT

95

Pacplan Ergoline - robust, heavy duty workstations suitable for industrial use

Pacplan Ergoline Packing Stations Packing Stations

PPE1600

PPEHMS

Ergoline Packing Table 2000mm system available on request For Bubble/Corry over 1200mm in width the 2000mm table is required

A range of quality, ergonomic workstations specifically designed with the packaging operative in mind

1600mm x 800mm x 800mm complete with height adjustable legs 50.5kg

PPE1601

PPE1602 Mobile Heat Sealer Station There is increasing demand for ‘Pick-Pack’ despatch of random sized packages. The new Mobile Heat Sealer Station enables the creation of a system that incorporates the S620 Opti-seal heat sealer (see page 46) and 2 sizes of layflat tubing up to 24” (610mm) wide to create mailing bags, on demand, to any length.

Heavy Duty 25mm worktops and shelves designed to withstand regular use in industrial environments

Ergoline Steel/MDF Shelf 1600mm x 300mm shelf complete with 2 upright supports

22.8kg

Ergoline Under Table Mandrel For dispensing bubble /foam/corrugated up to 1200mm width

4.0kg

Max number of shelves per table required: 2

Robust steel and MDF shelf construction for strength and durability

PRD Paper Roll Dispenser The Ergoline counter roll dispenser is available in either 600mm or 900mm roll widths.

Postformed table top profile for increased operator comfort and safety Takes up to 200mm diameter rolls

Fully adjustable 50mm leg section. Height from 750mm to 900mm with adjustable feet for maximum stability

96

PACKING ROOM EQUIPMENT

PPE1603

PPE1604

PPE1605

Ergoline Cutter

Small Box Divider

Large Box Divider

Bench mounted 1200mm cutter for bubble/foam/corrugated 7.8kg

250mm x 300mm

5.0kg

300mm x 400mm 0.4kg

0.5kg

Pacplan – equipment for packing and order fulfilment operations

Pacplan Anti-Fatigue Mats and Dispensers

Pacplan PFM-1 Safety Mat

Pacplan PFM-2 Super Mat

Pacplan PFM-3 Endura Mat

> Raised diamond tread pattern surface for underfoot grip. > 900 x 1500 x 9.0mm

> Dual fused layer for superior comfort & durability. > Ideal for demanding locations > 900 x 1500 x 12.5mm

> Hardwearing PVC soil resistant diamond pattern surface. > Comfortable foam ‘cushion’ backing for fatigue relief. > 900 x 1500 x 14mm

Polestar Mobile Cutter & Stand

Polestar Combi Cutter & Stand

The Polestar Mobile Cutter is a quality, durable unit featuring a precision cutting unit specifically designed for use with corrugated paper, bubble film, foam and similar materials. This fully mobile unit is available for 1200mm or 1500mm wide material.

The Polestar Combi Packer provides the option to dispense and cut a variety of materials used in the packing area. Available for 1200mm or 1500mm wide materials. PCUT03 W800mm x L 1500mm x H 1630mm PCUT04 W800mm x L 1850mm x H 1630mm

PCUT01 W800mm x L 1500mm x H 1130mm PCUT02 W800mm x L 1850mm x H 1130mm

These cutters are supplied with 2 blades. The standard blade will cut bubble, foam and corrugated paper. For use on corrugated only we recommend the use of the serrated cutter as this will last longer than the standard blade, but is not effective on bubble or foam.

PPD Paper Roll Dispenser

The Polaris PPD dispenser is only available as a bench mounted dispenser. Available in 600mm, 800mm or 1000mm width

These cutters are supplied with 2 blades. The standard blade will cut bubble, foam and corrugated paper. For use on corrugated only we recommend the use of the serrated cutter as this will last longer than the standard blade, but is not effective on bubble or foam.

DPPD750-155 PPD750-155 Double Dispenser Paper Roll Dispenser

PRD750 Ribbon Dispenser

Dual Paper roll dispenser 750mm – 155mm max roll width

Single Paper Roll Dispenser 750 width for Rolls 155mm Diameter

750mm ribbon dispenser.

BMC BL

BMC SB

Price includes feet. Takes up to 200mm diameter rolls

BMC Bench Mounted Cutter For cutting foam, corrugated paper and bubble wrap. Available in 750mm, 120mm and 1500mm widths.

Replacement cutter blades. Standard V Blade Cassette ideal for bubble, foam and corrugated.

Rotary Serrated Blade Cassette ideal for cutting corrugated only. Lasts much longer than the standard blade.

PACKING ROOM EQUIPMENT

97

PACKING ROOM EQUIPMENT

Anti-Fatigue Mats

Our range of anti-fatigue mats offers a comfortable surface designed to reduce fatigue and pressure on the feet, legs and spine at static work locations.

The Pluto range provide complete flexibility whilst the Kinetix range is the perfect introduction to professional workstations

pluto

Pluto Cutter Stands & Kinetix Packing Stations The new range of Pluto Cutter Stands is ideal for dispensing and cutting foam, foil, bubble wrap, kraft paper, corrugated paper, PVC plastic roll, film etc.. The cutter units are supplied with two cutting cassettes - a ‘V’ shape blade for bubble and foam and a rotary cutter for corrugated paper.

cutter stands

PLU001

PLU002

PLU003

1500mm Single Dispenser with Cutter

1500mm Combi Dispenser

1500mm Twin Roll Dispenser with Cutters

PLU001 Pacplan dispenser stand and cutter for efficient dispensing and cutting of bubble film, foam, corrugated paper and similar products. The cutter unit is supplied with two cutting cassettes a ‘V’ shape blade for bubble and foam and a rotary cutter for corrugated paper. Maximum working width - 1500mm W : 1880 D : 830 H : 1250 Set of casters sold separately.

PLU002 Pacplan combi dispenser stand for efficient dispensing of bubble film, foam, corrugated paper and similar products. Maximum working width - 1500mm W : 1860 D ; 810 H : 1170 Set of casters sold separately.

PLU003 Pacplan combi dispenser stand and cutters for efficient dispensing and cutting of bubble film, foam, corrugated paper and similar products. The cutter units are supplied with two cutting cassettes - a ‘V’ shape blade for bubble and foam and a rotary cutter for corrugated paper. Maximum working width - 1500mm W : 1880 D : 830 H : 1610 Set of casters sold separately.

PLU004 1500mm Bench Mounted Cutter PLU004 Pacplan Bench mounted cutter for attaching to an exisiting work station for cutting bubble film, foam, corrugated paper and similar products. The cutter units are supplied with two cutting cassettes - a ‘V’ shape blade for bubble film and foam and a rotary cutter for corrugated paper. Maximum working width - 1500mm W : 1760 D : 100 H : 210 This unit can be attached to the Ergoline PPE1600 with PLU006 fixing brackets. Please note the cutter will extend beyond the total table width.

KXWS001 Pack Station 1600mm x 800mm Pack Station The KXWS001 from the Kinetix range of packaging products is an entry-level, professional workstation for the low-to medium-volume user. Its sturdy, powder-coated tubular steel frame supports an 820mm high, 1600 x 800mm melamine coated work surface and includes a number of space-saving and handy features designed to maximise its versatility. Two mandrels are situated above and below the workbench for convenient dispensing of kraft, bubble and corrugated packaging products. Two steel storage shelves above the bench store accessories clear of the bench but within easy reach, one of them perforated with a series of cut-outs designed to securely hold commonly-used packaging equipment such as tape dispensers and handy wrap rolls.

PLU005 Brackets

PLU006 Castors

Set of Pluto brackets for attaching the PLU004 cutter to the PPE1600 packing table.

PLU006 set of Casters for the Pluto range of dispenser stands.

LST-200 Traditional Steel Hand Truck > Capacity 100kg > 1100mm x 490mm x 460mm HxWxD > Footplate depth 180mm > Wheel diameter 250mm > Weight 8.8kgs

8.8kg

40kg

AST-200 KXPD Paper Roll Dispenser An economical, flexible way of ensuring your wrapping paper is placed where it is most useful.

Total positional flexibility allows you to...

Lightweight Aluminium Hand Truck > Capacity 80kg > 1120mm x 490mm x 490mm HxWxD > Footplate depth 125mm > Wheel diameter 250mm > Weight 6.45kgs

6.45kg

Bench Mount

98

Wall Mount

Under Mount

PACKING ROOM EQUIPMENT

Stronghold staplers offer excellent value for money and reliability

Stronghold Staplers SHR31

26/6 Plier Stapler

Heavy Duty Plier Stapler

SHR11

Hammer Tacker

PACKING ROOM EQUIPMENT

SHK1

Takes both 24/ and 26/ ranges of staples

General purpose plier stapler for use in the post room, shop, store and office. Staples 50 sheets.

26/6 staple (ACTUAL SIZE)

0.4kg

Heavy duty plier stapler, ideal for Jiffy bags, small boxes and sacks, including 3 types of anvil for a variety of stapling applications.

73/10 staple (ACTUAL SIZE)

Easy to use hammer tacker for stapling labels to pallets and crates, carpets, insulation material etc.

1.0kg

0.4kg

Staples 5000 staples/box

Staples 5000 staples/box

Staples 5000 staples/box

code 24-6S S26-6 S24-8 S26-8

code 73-8S 73-10S 73-12S

code S140-6 S140-8 S140-10

leg length 6mm 6mm 8mm 8mm

SHR50

General Purpose Tacker

140/10 staple (ACTUAL SIZE)

leg length 8mm 10mm 12mm

SHR60

leg length 6mm 8mm 10mm

Heavy Duty Tacker

SP50 SERIES STAPLERS

The Stronghold SP50 Series staplers are designed to compress the material and provide a strong, tight closure without breaking the corrugated surface. The 6” x 1” throat allows flexibility of staple placements and overcomes obstructions such as the carton flaps.

A TYPE The A Type anvil is ideal for stapling corrugated cartons, vegetable tray boxes, end caps, pallet boxes, container inserts, die cut inserts etc.

Robust, chrome plated all-metal construction with ergonomic soft-grip lockdown handle. Suitable for textiles, canvas, leather, upholstery or up to 50 sheets of paper.

0.86kg

23/6 staple (ACTUAL SIZE)

Light weight high impact ABS plastic body with metal lockdown handle and adjustable pressure control. Suitable for plastic sheeting, cardboard, insulation material, or up to 80 sheets of paper.

140/10 staple (ACTUAL SIZE)

CL CR TYPE

0.45kg

Staples 5000 staples/box

Staples 5000 staples/box

code S23-6 S23-8 S23-10

code S140-6 S140-8 S140-12

leg length 6mm 8mm 10mm

B TYPE The B Type anvil is ideal for stapling blister packs and has a raised anvil to prevent crushing to the edge of the blister pack.

leg length 6mm 8mm 12mm

The CL, CR Type anvil is designed to staple the tops and side seams of cartons.

PACKING ROOM EQUIPMENT

99

Stronghold SP50 Pneumatic Staplers provide powerful, heavy duty stapling

Stronghold Staplers

ATYPE Anvil

SP50 SERIES STAPLERS

Stapler Code

Staple Type

SP50-10B-A Staple Specification 12.95mm crown width 2.6mm wire width available in 3 leg lengths

SP50-5B-A

3.0kg

Staple Specification 12.85mm crown width 1.27mm wire width available in 4 leg lengths

SB10302038 3/8” 9.5mm SB10302012 1/2” 12mm SB10302058 5/8” 16mm

SB501914 1/4” 6mm SB501938 3/8” 9.5mm SB501912 1/2” 12mm SB501958 5/8” 16mm

BTYPE Anvil

SP50 SERIES STAPLERS

Stapler Code

Staple Type

SP50-10B-B Staple Specification 12.95mm crown width 2.6mm wire width available in 3 leg lengths

SP50-5B-B

3.0kg

Staple Specification 12.85mm crown width 1.27mm wire width available in 4 leg lengths

CL/CR

SP50 SERIES STAPLERS

SP50-10B-CL SP50-10B-CR Staple Specification 12.95mm crown width 2.6mm wire width available in 3 leg lengths

SP50-5B-CL SP50-5B-CR

100

PACKING ROOM EQUIPMENT

SB501914 1/4” 6mm SB501938 3/8” 9.5mm SB501912 1/2” 12mm SB501958 5/8” 16mm

TYPE Anvil

Stapler Code

3.2kg

SB10302038 3/8” 9.5mm SB10302012 1/2” 12mm SB10302058 5/8” 16mm

Staple Specification 12.85mm crown width 1.27mm wire width available in 4 leg lengths

Staple Type

SB10302038 3/8” 9.5mm SB10302012 1/2” 12mm SB10302058 5/8” 16mm

SB501914 1/4” 6mm SB501938 3/8” 9.5mm SB501912 1/2” 12mm SB501958 5/8” 16mm

Stronghold offer a variety of high quality staplers, staples and accessories

Stronghold Staplers AIR27

Carton Stapler

Manual carton stapler for securing the tops of filled cartons. Takes 32-15S and 32-18S staples.

Carton Stapler

PACKING ROOM EQUIPMENT

MAN27

Pneumatic version of the MAN27, ideal for long production runs. Takes 32-15S and 32-18S staples.

2.8kg

2.8kg

TRED27

TRED27AIR

Treadle Stapler

Treadle Stapler

The TRED27AIR increases output of carton base assembly and stapling. Supplied with a safety foot pedal, it is recommended for hourly volumes of 50-100 cartons. Supplied with a safety foot pedal. Designed for assembling and stapling the bottom of cartons. Uses 32-15S and 32-18S staples.

Foot-operated treadle stapler for assembling and stapling the bottom of cartons. Uses 32-15S and 32-18S staples.

36.3kg

36.3kg

Ultimate Quality Staples

SHBS

Box Support

Competitively priced, all-metal box support, used with Stronghold AIR27 and MAN27 Staplers for professional, easy stapling of carton bases prior to filling.

kg/case

15.8

32/15 staple

17.3

Code

Table Size

18.3

SHBS9

229 x 229mm

15.4

SHBS918

229 x 457mm

PACKING ROOM EQUIPMENT

101

Market leading quality staplers, tackers and accessories

Staplers and Tackers K1 Rapid 26 Series Stapler K124-8 Rapid 24 Series Stapler

R31

The world’s most sold plier and florist’s favourite. The obvious choice for the post room, shop, store and office. Adjustable anvil for pinning. Staples up to 50 sheets. Chrome finish. State size when ordering.

Versatile, powerful plier stapler with fingerstop. Ideal for Jiffy bags, small boxes and sacks etc.

Rapid Heavy Duty Plier Stapler with Dual Anvil

26/6 staple (ACTUAL SIZE)

0.4kg

S51

Rapid Plier Stapler

Handy plier stapler for home and office. Comfortable grip, with all-steel construction and powder coated finish. 21/4 staple (ACTUAL SIZE)

73/10 staple (ACTUAL SIZE)

0.2kg

0.5kg

Rapid staples 5000 staples/box

Rapid staples 5000 staples/box

Rapid staples 5000 staples/box

code S26-6 S26-8 S24-6 S24-8

code S73-8 S73-10 S73-12

code S21-4

leg length 6mm 8mm 6mm 8mm

R11

R3

Rapid Hammer Tacker

leg length 8mm 10mm 12mm

Rapid Stapler Remover

leg length 4mm

Ultimate Quality

Staples

Easy-use hammer tacker for stapling fitted carpets, insulation material, roof paper etc.

140/10 staple (ACTUAL SIZE)

1.0kg

Rapid staples 5000 staples/box code S140-6 S140-8 S140-10

leg length 6mm 8mm 10mm 0.1kg

102

PACKING ROOM EQUIPMENT

Please see Page 101

Heavy duty hand tackers ideally suited for regular, industrial use

Hand Tackers, Scissors and Tape Meaures R23 R33

Rapid Hand Tacker

Rapid Hand Tacker (4-8mm staples)

R34

Rapid Hand Tacker

Rapid Hand Tacker (6-14mm staples)

PACKING ROOM EQUIPMENT

R64

High impact-force hand tackers for decorative work, re-upholstering etc.

Suitable for plastic insulation sheet, edging or beading etc. Adjustable impact force. Uses either staples or brads.

13/8 staple (ACTUAL SIZE)

Suitable for fastening plastic film, insulation material and carpets etc. to all kinds of wood. Adjustable impact force. 140/10 staple (ACTUAL SIZE)

140/10 staple (ACTUAL SIZE) R23: 0.6kg R33: 0.9kg

0.4kg

Rapid staples 5000 staples code S140-6 S140-8 S140-10 S140-12 S140-14 S300-16

880 brads

leg length 6mm 8mm 10mm 12mm 14mm 16mm (brads)

0.5 0.6 0.65 0.8 0.95 0.1

leg length 6mm 8mm

Rapid staples 5000 staples

Rapid staples 5000 staples

code S13-4 S13-6 S13-8 S13-10 S13-14

code S140-6 S140-8 S140-10 S140-12 S140-14

leg length 4mm 6mm 8mm 10mm 14mm

0.2 0.25 0.35 0.4 0.45

leg length 6mm 8mm 10mm 12mm 14mm

0.5 0.6 0.65 0.8 0.95

Rapid staples 5000 staples/box

Rapid staples 5000 staples/box code S66-6 S66-8

0.9kg

0.2 0.23

code S9-14

leg length 14mm

SG Scissors

0.55

TM5 Tape Measure Pacplus 5mtr tape measure with comfort grip Qty per box: 12

General Purpose, Serrated Blade Industrial and Comfortable Grip Industrial Scissors. Qty per box: 25

SG160 General Purpose Scissors

SG220 Industrial Scissors with Serrated Blade

SG230 Industrial Scissors with comfortable handle

PACKING ROOM EQUIPMENT

103

The Optimax CX3 Cruze Cutter is the most ergonomic, efficient safety cutter on the market

Utility and Safety Knives CX3 Cruze Cutter Ergonomic Safety Cutter

Designed with the packaging operative in mind, the CX3 Cruze Cutter has been designed to be more comfortable to use, reduce operator fatigue and increase productivity. Its ergonomic design allows it to sit comfortably in the palm of your hand. Its wide, textured, high-grip body, smooth finger grips and thumb rest combine to create the most comfortable to use safety knife currently on the market. Its curved profile pallet film cutter and oversized box cutter make light work of unpacking tasks, even in the toughest industrial environments.

Finger and thumb rests placed in the optimal position for both male and female users

Wider body profile allows the knife to fit perfectly in the palm of the hand, increasing grip

Thumb rest for leading comfort and control and larger thumbnail cutter for piercing tape without damaging contents of the carton

Curved leading edge to stop stretch cutter snagging on any ridges. Concealed blade for increased safety

Sculptured body, embossed grip area and eyelet all increase functionality

Box 12/1.1kg

KNL/KNR

BNL/BNR

SNL/SNR

Budget Safety Cutter

Safety Cutter

Safety Cutter with Automatic Retract Function

Blade automatically retracts as soon as the blade contact is lost Quantity Box: 12 Quantity per outer: 240

Blade automatically retracts as soon as the BNL= Safety knife, left hand blade contact is lost BNR= Safety knife, right hand Quantity Box= 12 Please state when ordering

Blade automatically retracts as soon as the blade contact is lost SNL= Safety knife, left hand Quantity Box= 10 SNR= Safety knife, right hand Quantity per outer= 50 Please state when ordering

KNL= Budget safety knife, left hand KNR= Budget safety knife, right hand Please state when ordering Replacement Blades Product Code: KNLRB-10

Box 12/1.1kg

CHS

Box 12/1.1kg

Safety Cutter

Lockable, auto-retractable blade 3 adjustable cutter depths

Box 10/0.9kg Replacement Blades CODE 152.6 LA

ACK

Replacement Blades Product Code: BNLRB

Safety Cutter

Ideal for reducing height of carton

FET

Replacement Blades Product Code: SNR.RB Box 10/1.1kg

EST

Safety Cutter

Lockable, auto-retractable blade, metal head for reduced friction wear, designed for opening packaging 3 adjustable cutter depths

Box 10/0.9kg Replacement Blades CODE 152.6 LA

Safety Cutter

Lockable, auto-retractable blade, flat head facilitates cutting of straight lines and 3 adjustable cutter depths (Colour may vary)

Box 5/0.5kg

Replacement Blades CODE 152.6 LA

LDK9 9mm Snap-Off Blade Knife

MDC18 18mm Snap-Off Blade Knife

Lockable Blade

Lockable Blade

(Colour may vary)

Box 5/0.9kg Replacement Blades CODE 152.6 LA

104

PACKING ROOM EQUIPMENT

Box 30/0.7kg

Replacement Blades-RB9

Box 12/0.9kg

Replacement Blades-RB18

Choose from our vast range of utility knives and consumables designed to satisfy a vast range of cutting applications

Utility and Safety Knives Heavy Duty 9mm Snap-Off Blade Knife

Lockable blade

Heavy Duty 18mm Snap-Off Blade Knife

MRK

Metal Retractable Knife

Lockable blade Replacement Blades-RB9

Box 12/0.4kg

CPK18

MSC Box Cutter

Replacement Blades-RB18

Box 12/1.3kg

PDC18 Heavy Duty 18mm Snap-Off Blade Knife

Replacement BladesRCB/BDP100

Box 12/2.2kg

MA1

Multi-Function Cutter

Lockable blade Ideal for cutting stretchfilm Integral thumbnail tape cutter Box 12/0.4kg

BSC

Replacement Blades-RB18

Box 12/1.3kg

Box Cutter

EFC12

Box 12/0.9kg Replacement Blades-MA1-RB

Economy Stretchfilm Cutter

SX5

Safety Cutter

For cutting stretchfilm, bubble and shrinkfilm 12 per box

Box 12/0.4kg

FSC

Box 12/0.5kg

3 in 1 Multi-Function Safety Cutter

MCO

Safety Cutter, for paper and lightweight sheet materials.

Multi-Purpose Carton Opener Box 10/0.4kg

KNLRB-10 Ideal for stretchfilm and strapping, the FSC also has a thumbnail blade for piercing tape on cartons without damaging the contents. Replacement Blades CODE 489-3-10 Box 10/1.0kg CODE 489-3-100

LY1 Plastic Lanyard Fits all knives. Saves time. The knife stays with the operator.

Carton Opener, staple Remover, string and plastic slitter and film cutter in one knife. Replacement blades

Box 12/1.1kg

Box 25/0.9kg

BDP100 & RCB

RB9

BDP100

RCB Lockable blade

Box 25/0.9kg

MLY

RB18

Metal Retractable Lanyard

Box 10/0.5kg

9mm Snap-Off Blades

Utility Knife Replacement Blades

Box 10/0.4kg

The MLY is a retractable metal chain for use with our wide range of safety cutters. The device has a belt hook facility, ensuring the cutter is always where you want it.

18mm Snap-Off Blades

100 Blade Dispenser

Blister Pack of 5

0.4kg

18mm Snap-Off Blades

Lockable blade

Box 25/0.9kg

PACKING ROOM EQUIPMENT

105

PACKING ROOM EQUIPMENT

CPK9

Our Janitorial products offer you a range of everyday workplace essentials

Janitorial Products Centre Feed Rolls

Coventional Toilet Rolls/Bulk Pack

Code

Description

CFR7306 CFR7321 RC6506 CFR7309

1 ply blue x 20cms x 300mtrs (6/case) perforated 1 ply white x 20cms x 300mtrs (6/case) perforated 2 ply blue x 20cms x 150mtrs (6/case) perforated 2 ply white x 20cms x 150mtrs (6/case) perforated

7.50

Code

Description

7.50

RT3644

2 ply luxury 320 sheet paper wrapped (36/case)

7.50

C-Fold Hand Towels

Industrial Wiper Rolls Code

Code

Description

FC8501 FC5804 F19292

1 ply blue x 2880 sheets 23cm x 33cm 2 ply white soft x 2400 sheets 23cm x 33cm 1 ply green interfold towels x 3600 sheets

11.2 8.50 8.8

Mini Jumbo Toilet Rolls

Code

Description 2 ply white x 200mtr x 21/4” core (12/case)

RT3504

7.10

7.50

Description

RW5610 2 ply white 260mm x 400mm x 1000 sheets (2/case) RW6310 2 ply blue 260mm x 400mm x 1000 sheets (2/case)

Rag Replacement Wipers Code Description RN1508 Ultra strong, lint free with solvents, excellent wet strength. Ideal for Press Wipers or Engineering etc. Sheet size 280mm x 400mm 400 sheets/roll 160 mtr 2 rolls per case

7.60

Jumbo Toilet Rolls

10.0 10.0

12.5

Paper Dispensers Please note: Colour of dispensers may vary from those shown

Code Code

Description 2 ply white x 410mtr x 21/4” core (6/case)

RT3522

7.70

Wiping Rags

Code MCCR WCSR

Description

HTD-506883 C-Fold Dispenser (BC528W) HTD-506884 Centre Feed Dispenser (BC8311) TRD-506889 Jumbo Toilet Roll Dispenser 21/4” core (BC335W)

Description

Code

Description

Mixed cotton coloured pieces. 10 kg box Cotton white sheeting. 100% cotton 10 kg box

LTXL-M LTXL-L

Medium Latex Gloves 100/Box (10 Boxes/100/outer) Large Latex Gloves 100/Box (10 Boxes/100/outer)

12.5 12.5

Bin Liners

* Wheelie Bin Liners ** Blue Aggregate Sacks

Price per 1,000

Code

Size

Qty/box

RS002 RS003 RS005 WBL049 ARG2030

18” x 29” x 39” x 180g 16” x 25” x 39” x 300g 18” x 29” x 39” x 120g 30” x 46” x 54” x 17mu* 20” x 30” x 480g**

200/box 100/box 200/box 250/box 100/box

PACKING ROOM EQUIPMENT

1.20 1.20

Powdered Latex Gloves

Refuse Sacks

106

1.00

11.7 8.70 6.70 11.5 8.70

Code

Size

WSBL

13” x 23” x 29” Swing Bin Liners White High Density 1000/Bx (10x100) 15” x 24” x 24”x7mu Square Bin Liners 11” x 17” x 18”x7mu Pedal Bin Liners

SBL-1 PBL-1

0.80 0.80

4.45 4.60 2.40

PACKAGING EQUIPMENT PORTFOLIO

Index By Brand B D E G J K

M

O

P

R

S

T

U X

21 13 9 80 56 56 97 97 24 24 57 98 98 22 52 68 66 66 56 31 31 31 89 104 90 73 32 62 32 40 88 53 46 96 47 97 96 97 94 97 97 97 24 24 50 58 64 22 59 103 61 44 60 61 83 80 97 45 103 102 49 80 79 10 13 67 87 101 101 100 99 101 38 13 13 59 58 64 67 27 86 21 10 8 10 19 13 17 14 17 13

Bonus Tapes & Dispensers Drop'n'Tell System E-Z Pull Tab Tape Galvex Strapping Buckles Jiffy® Padded Bags Jiffylite Airkraft® Bags Kinetix® Pack Station Kinetix® Paper Roll Dispenser Kinetix® Bag Neck Sealers Kinetix® Bench Mounted Tape Dispensers Kinetix® Bubble Box Kinetix® Pack Station Kinetix® Paper Roll Dispenser Kinetix® Pistol Grip Tape Dispensers Kinetix® Stretch Film Dispensers KitStart Strapping Kits Kraftek® Corner Protectors Kraftek® Edge Boards Mailmiser® Bags Marcwell® Floor Marking Tapes Marcwell® Hazard Warning Tapes Marcwell® Lane Marking Applicator Optigrip Strapping Buckles Optimax® Cruze Cutter Optimax® Automatic Strapping Machines Optimax® Battery Powered Strapping Tools Optimax® Case Tapers Optimax® Ecopax Cardboard Shredders Optimax® Flexible Conveyor Optimax® Heat Shrink Chambers Optimax® Semi-Automatic Strapping Machines Optimax Shrink Wrap Turntables Opti-Seal Impulse Heat Sealers Opti-seal Mobile Heat Sealer Station OptiVac Vacuum Heat Sealers Pacplan® Anti-Fatigue Mats Pacplan® Ergoline Packing Stations Pacplan® Polestar Cutter/Stands Pacplan® Technik Bespoke Pack Stations Pacplan® Bench Mounted Cutters Pacplan® Packing Stations Pacplan® Paper Roll Dispensers Pacplus® Bag Neck Sealers Pacplus® Bench Mounted Tape Dispensers Pacplus® Gas Shrink Systems Pacplus® Label Dispensers Pacplus® Picking Trolleys Pacplus® Pistol Grip Tape Dispensers Pacplus® Slica Gel Sachets Pacplus® Tape Measure Pacplus® Voidstar Void Fill System Pacseal Impulse Heat Sealers Pillopax® Air Cushion System Pillopax® Film Plaztek Edge & Corner Protectors Plaztek Strapping Buckles Pluto Cutter Stands Pro-Seal Impulse Heat Sealers Rapid Hand Tackers Rapid Staplers & Tackers Ripack® Gas Shrink Systems Safeguard® Seals SASSband® Stainless Strapping Sentry Seal Tapes Shockwatch System Slipguard Anti-Slip Sheets Softex Woven Cord Strapping Stronghold® Carton Staplers Stronghold® Carton Staples Stronghold® Pneumatic Staplers Stronghold® Staplers Stronghold® Treadle Staplers Tenzalopes® Document Enclosed Wallets TiltWatch System Tip'n'Tell System TransHaz Labels TransLabel Parcel Labels Transpal® Plastic Pallets Transtarp Industrial Tarpaulins Transtext Printed Message Tapes Trimax® Polyester Strapping Umax Tapes & Dispensers Xtegra® Tegrabond® E-Z Pull Tab Tape Xtegra® Tegrabond® Tape Dispensers Xtegra® Tegrabond® Water Activated Tapes Xtegra® Tegracheck® Tapes, Labels & Tags Xtegra® Tegralert Non-Stack Cones Xtegra® Stickfast Glue Gun Accessories Xtegra® Stickfast Glue Guns Xtegra® Stickfast Glue Sticks Xtegra® Transit Monitors

By Product A

B

C

D

E F G H

I K

L

M N P

R

S

97 67 48 90 48 37 36 34 37 35 36 35 48 56 62 48 32 48 83 66 95 38 29 66 83 37 32 49 64 53 59 40 17 14 17 42 104 55 55 58 19 31 105 37 37 57 57 55 13 38 95 87 64 58 64 38 39 67 56 53 67 106 55 57 57 57 103 88 51 39 39 53 59 102 101 99 103 99 100 101 101 87 92 92 92 73 80 72 70 77 87

Anti-fatigue mats Anti-slip sheets Anti-static bags Automatic strapping machines Bags - anti-static bubble Bags - carrier Bags - drawstring polythene Bags - grip seal Bags - gusseted PP/PE Bags - polythene Bags - self-seal PP/PE Bags - slider grip seal Bin liners Bubble pouches Cardboard shredders Carrier bags Case tapers Combination shipping labels Corner protectors Corrugated corner protectors Dispensers - paper/bubble roll Document Enclosed Wallets Double-sided foam pads Edge boards Edge protectors Film unrollers Flexible conveyor Gas shrink systems Hand trucks Handy Wrap dispensers Hazard warning labels Heat shrink chambers Hotmelt glue gun accessories Hotmelt glue guns Hotmelt glue sticks Impulse heat sealers Knives - utility & safety Kraft paper Kraft union paper Label dispensers Labels - tamper evident Lane marking applicator Lanyards Layflat tubing Layflat tubing dispenser Mailing envelopes - polythene Mailing sacks - paper News offcuts Non Stack Cones Packing List Envelopes Packing stations Pallet probe Pallets - plastic Parcel labels - printed message Picking trolleys Polythene sheeting Polythene top covers Protective layer sheets Protective mailing products Protective sleeving Ratchet straps Refuse sacks Rust inhibitor paper Sack ties Sack tying tool Sacks - woven PP Scissors Semi-automatic strapping machines Shrink films - polythene Shrink films - polyolefin Shrink films - PVC Shrink wrap turntables Silica gel sachets Staple remover Staplers - carton Staplers - hammer tacker Staplers - hand tackers Staplers - plier Staplers - pneumatic Staplers - treadle Staples - carton Strapping - bale press Strapping - banding machine Strapping - paper bands Strapping - plastic bands Strapping - battery powered tools Strapping - buckles for plastic Strapping - combi tools for PE Strapping - combi tools for PP Strapping - combi tools for steel Strapping - composite PE

T

V

W

79 78 87 84 86 85 85 84 78 75 72 71 76 80 87 79 68 75 72 71 76 87 52 52 86 59 19 24 24 21 22 38 21 8 103 28 21 30 28 30 29 29 29 29 29 29 29 31 31 30 30 28 30 27 26 26 27 26 26 26 26 27 28 30 19 21 27 26 10 9 10 67 55 13 86 47 61 631 55

Strapping - dispensers for plastic Strapping - dispensers for steel Strapping - hotmelt cord PE Strapping - mill wound steel Strapping - PE Strapping - PP hand Strapping - PP machine Strapping - ribbon wound steel Strapping - safety cutters Strapping - sealers for cord/composite Strapping - sealers for PE Strapping - sealers for PP Strapping - sealers for steel Strapping - seals Strapping - Softex woven cord Strapping - stainless steel Strapping - starter kits Strapping - tensioners for cord/composite Strapping - tensioners for PE Strapping - tensioners for PP Strapping - tensioners for steel Strapping - woven cord PE Stretch film dispensers Stretch films String - cotton Tags Tags - tamper evident Tape Dispensers - bag neck sealers Tape Dispensers - bench mounted Tape Dispensers - Bonus Tape Dispensers - hand held Tape Dispensers - pouch tape Tape Dispensers - Umax Tape Dispensers - water activated tapes Tape measure Tapes - aluminium foil Tapes - Bonus Tapes - clear stationery Tapes - cloth Tapes - crossweave reinforced Tapes - double-sided cloth Tapes - double-sided foam Tapes - double-sided HD UPVC Tapes - double-sided PP film Tapes - double-sided PP hotmelt Tapes - double-sided premium PE Tapes - double-sided tissue Tapes - floor marking Tapes - hazard warning Tapes - hook and loop coins Tapes - hook and loop strips Tapes - masking Tapes - monoweave reinforced Tapes - polythene barrier non-adhesive Tapes - PP acrylic Tapes - PP acrylic low noise Tapes - PP coloured acrylic Tapes - PP economy acrylic Tapes - PP hotmelt Tapes - PP machine rolls Tapes - PP solvent Tapes - printed message Tapes - self-adhesive kraft Tapes - strapping Tapes - tamper evident Tapes - Umax Tapes - underground warning Tapes - vinyl Tapes - water activated Tapes - water activated pull tab Tapes - water activated printed message Tarpaulins Tissue paper Transit monitors Twine - PP and sisal Vacuum heat sealers Void fill - air pillow Void fill - paper Waxed kraft paper

INDEX

107

PACKAGING EQUIPMENT PORTFOLIO

®

Packaging Equipment Portfolio OPTIMUM QUALITY MAXIMUM RELIABILITY

Go online now to find your local Optimax® authorised distributor and to discover the complete Optimax® packaging equipment range at

www.optimaxproducts.com

© Optimax 2015 No part of this catalogue may be reproduced or transmitted in any form or by any means without the express written authorisation of Optimax. In line with our policy of continual product development we reserve the right to alter specifications withour prior notice.

PACKAGING EQUIPMENT PORTFOLIO. Packaging Equipment Portfolio OPTIMUM QUALITY MAXIMUM RELIABILITY - KIPDF.COM (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 5930

Rating: 5 / 5 (80 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.